A strong choice for a three-bolt trailer-jack search should match the trailer’s mounting pattern, support the required tongue load, and provide enough travel to level and couple safely. The products here are mostly A-frame jacks, with capacities from 2,000 to 8,000 pounds and manual or drill-compatible operation. However, the supplied listings do not confirm that any model uses a three-bolt mounting pattern, so treat pattern compatibility as a must-check before buying rather than an established feature.
Compare the listed capacity with your trailer’s actual tongue weight, not its gross trailer weight, and check retracted and extended dimensions against your setup. This guide ranks the closest functional options while calling out where listing details leave a compatibility question unresolved.
VEVOR 5000 lbs A-Frame Jack leads as a capable general-purpose option, with a listed 5,000-pound capacity, a 9.65-to-24.64-inch lifting range, and installation by bolt or weld. Its swivel function and included crank handle add practical flexibility. The listing does not verify a three-bolt pattern, though, so confirm the mounting-hole layout and dimensions against your trailer before ordering.
If drill operation or a higher capacity matters more, consider the other ranked options and verify their fit as well.
Our Top Picks

Its 5,000-pound capacity, 9.65-to-24.64-inch lifting range, bolt-or-weld installation, swivel function, and included crank make it a versatile A-frame option.
View on Amazon
Best Drop LegThis 5,000-pound jack offers 15 inches of movement plus a 10-inch drop-leg adjustment, with a powder-coated steel body and one-year warranty.
View on Amazon
Best Drill OptionIt combines 5,000-pound capacity with 20–24V drill compatibility, manual operation, three mounting holes, and bolt-or-weld installation; confirm pattern fit.
View on Amazon- Power or Manual FZZD 5000 lbs A-Frame Jack
- Highest Capacity POPBULL 8000 lb Swivel Jack
Compare the trailer jack options and fit details
| # | Product | Load Capacity | Dimensions | Material | Weight | Buy |
|---|---|---|---|---|---|---|
| 1 | 1. VEVOR 5000 lbs A-Frame JackBest Overall | 5000 lb | 25 x 6 x 6 in | Carbon Steel | 5 kg | View on Amazon |
| 2 | 2. TOWKING 5000 lbs A-Frame JackBest Drop Leg | 5000 lb | 23 x 108 x 7 in | Alloy Steel | 12 lb | View on Amazon |
| 3 | 3. POPBULL 5000 lbs Drill JackBest Drill Option | 5000 lb | — | Alloy Steel | 6.06 kg | View on Amazon |
| 4 | 4. FZZD 5000 lbs A-Frame JackPower or Manual | 5000 Lbs | 5.3 x 5.3 x 23.2 in | Alloy Steel | 15 lb | View on Amazon |
| 5 | 5. YOMILINK 5000 lbs A-Frame JackMulti-height RV setups | 5000 lb | 23 x 5.5 x 5.5 in | High Carbon Steel | 14 lb | View on Amazon |
| 6 | 6. TYT 5000 lbs A-Frame JackHigh-capacity top-wind trailers | 5000 lb | 20 x 5 x 5 in | Zinc | — | View on Amazon |
| 7 | 7. Pafessa 2000 lb Sidewind JackWide-footprint utility support | 2000 lb | 22.05 x 5.52 x 4.73 in | High Carbon Steel | 10.8 lb | View on Amazon |
| 8 | 8. MaxxHaul 70159 A-Frame JackSimple top-wind tongue lifting | 2000 lb | 21 x 6 x 5 in | Zinc | 9 lb | View on Amazon |
| 9 | 9. VEVOR 2000 lbs A-Frame JackLight-duty horse trailers | 2000 lb | 6.3 x 6.3 x 25 in | Welded Tube + Cold Rolled Steel Plate + 45#… | 11 lb | View on Amazon |
| 10 | 10. POPBULL 8000 lb Swivel JackHighest Capacity | 8000 lb | 25 x 9.98 x 6 in | Iron | 23 lb | View on Amazon |
Detailed Reviews: Best 3 Bolt Trailer Jack

#1 · Best Overall
1. VEVOR 5000 lbs A-Frame Jack
- Load Capacity: 5000 lb
- Dimensions: 25 x 6 x 6 in
- Material: Carbon Steel
- Weight: 5 kg
Best for: High-capacity adjustable trailers.
Why it ranks #1: Its 5,000-pound capacity, 9.65-to-24.64-inch lifting range, bolt-or-weld installation, swivel function, and included crank make it a versatile A-frame option.
A 5,000-pound rating paired with a 15-inch vertical-travel design gives this VEVOR jack a broad capacity and height-adjustment range for trailer-tongue lifting. Its adjustable drop leg adds another way to set working height, while the swivel function lets the jack swing up when it is not needed for support.
The listed 9.65-to-24.64-inch lifting range accommodates both higher- and lower-profile trailers, reducing the need to rely on a single fixed height. The adjustable drop leg offers a separate height-setting option, and the swivel function lets the jack move out of the way for travel. Installation can be bolted or welded to the trailer tongue, and the package includes a crank handle and manual. Its carbon-steel construction provides the specified material for this 5,000-pound-capacity jack.
- 5,000-pound lifting capacity
- 15-inch vertical-travel design
- Adjustable drop leg and swivel function
- Bolted or welded installation; crank handle included
- Its 5,000-pound rating may not suit trailers requiring more capacity.
Skip it if you need lifting capacity above 5,000 pounds; this jack is rated to that limit.
Choose this VEVOR for a trailer owner seeking a 5,000-pound A-frame jack with adjustable height and a swivel-away option. Its stated lifting range is 9.65 to 24.64 inches, so consider that range alongside your trailer setup.
Full product details
| Brand | VEVOR |
|---|---|
| Color | silver" or "gray |
| Compatible with Vehicle Type | Trailer |
| Included Components | 1 x Trailer Jack 1 x Crank Handle 1 x Manual |
| Item Dimensions | 25 x 6 x 6 inches |
| Item Weight | 5 kg |
| Load Capacity | 5000 Pounds |
| Manufacturer | VEVOR |
| Part Number | Trailer Jack 5000 lb |
| Material | Carbon Steel |
| Model Number | TJA-3000S+JF-1005H-Z |
| Style Name | 5000LBS |
Listed on Amazon as: VEVOR 5000 lbs A-Frame Trailer Jack, 15" Vertical Travel, Adjustable Drop Leg, for Horse, Utility, Yacht Trailers
View on Amazon
#2 · Best Drop Leg
2. TOWKING 5000 lbs A-Frame Jack
- Load Capacity: 5000 lb
- Dimensions: 23 x 108 x 7 in
- Material: Alloy Steel
- Weight: 12 lb
Best for: Fast drop-leg height changes.
Why it ranks #2: This 5,000-pound jack offers 15 inches of movement plus a 10-inch drop-leg adjustment, with a powder-coated steel body and one-year warranty.
A 10-inch drop leg gives this TOWKING jack a quick way to change height without repeated handle turns. Its 5,000-pound capacity and 15-inch movement range also suit substantial trailer-tongue lifting, while the sidewind handle provides manual control for precise adjustments.
The stated 8-inch retracted and 23-inch extended heights define the jack’s 15-inch movement range, helping buyers judge its working height against a trailer. For larger height changes, the 10-inch drop leg reduces repeated cranking. Manual sidewind operation allows controlled raising and lowering, and the high-strength steel construction has a powder-coated finish specified for weather and rust resistance. The jack is listed for trailers and RVs, with a drop leg and user manual included.
- 5,000-pound load capacity
- 15-inch movement range
- 10-inch drop leg reduces handle rotation
- Powder-coated high-strength steel
- Raising and lowering use manual sidewind operation.
Skip it if you want drill-powered raising instead of turning a manual sidewind handle.
Pick the TOWKING for a trailer or RV owner who values quick height changes through a drop leg and controlled manual adjustment. Its 8-to-23-inch stated height range is a relevant boundary when checking working height.
Full product details
| Brand | TOWKING |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer,Rv,etc |
| Included Components | Trailer Jack*1, Drop Leg*1, User Manual*1 |
| Item Dimensions | 23 x 108 x 7 inches |
| Item Weight | 12 pounds |
| Load Capacity | 5000 Pounds |
| Manufacturer | TOWKING |
| Part Number | TJ701134 |
| Manufacturer Warranty Description | 1 Year Manufacturer |
| Material | Alloy Steel |
| Model Number | TK-TJ701134 |
| Style Name | A-Frame |
Listed on Amazon as: 5000 lbs 15" Lift Side Wind A Frame Trailer Jack, RV Tongue Jack
View on Amazon
#3 · Best Drill Option
3. POPBULL 5000 lbs Drill Jack
- Load Capacity: 5000 lb
- Material: Alloy Steel
- Weight: 6.06 kg
Best for: Drill-ready long-lift setups.
Why it ranks #3: It combines 5,000-pound capacity with 20–24V drill compatibility, manual operation, three mounting holes, and bolt-or-weld installation; confirm pattern fit.
A 30-inch lift paired with drill or manual operation gives the POPBULL A-frame jack both extended height adjustment and operating flexibility. Its 5,000-pound capacity, adjustable drop leg, and three mounting holes address lifting, height setting, and installation choices for RV, horse, and utility trailers.
The 30-inch lift and adjustable drop leg provide height-setting options for trailer owners working across varied setups. A compatible 20–24V cordless drill can power raising, while the extended sidewinding handle remains available for manual operation. Its side handle has a wire-grip knob and a 1:1 gear ratio, specified for smooth, fast operation. Three mounting holes allow bolted or welded installation and are described as helping distribute weight for stability; the jack is rated at 5,000 pounds.
- 30-inch lift
- 5,000-pound load capacity
- 20–24V drill or manual operation
- Three mounting holes; bolted or welded installation
- Powered operation requires a compatible 20–24V cordless drill.
Skip it if you need powered lifting but do not have a 20–24V cordless drill and do not want manual operation.
This POPBULL suits RV, horse, and utility-trailer owners who value long lift, a drop leg, and two operating methods. Its drill-powered option depends on 20–24V compatibility; manual operation is also listed.
Full product details
| Brand | POPBULL |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | RV Trailer |
| Included Components | Comes with housing |
| Item Weight | 6.06 kg |
| Load Capacity | 5000 Pounds |
| Manufacturer | POPBULL |
| Part Number | POPPL4TJ07 |
| Manufacturer Warranty Description | 1 YEAR |
| Material | Alloy Steel |
| Model Number | POPPL4TJ07 |
Listed on Amazon as: 5000lbs A-Frame Trailer Jack,30" Lift 20-24V Cordless Drill Compatible with Adjustable Drop Leg for RV Trailer, Horse Trailers, Utility Trailers
View on Amazon
#4 · Power or Manual
4. FZZD 5000 lbs A-Frame Jack
- Load Capacity: 5000 Lbs
- Dimensions: 5.3 x 5.3 x 23.2 in
- Material: Alloy Steel
- Weight: 15 lb
Best for: Drill-assisted A-frame lifting.
Why it ranks #4: Its 5,000-pound capacity and choice of cordless-drill or manual-crank operation suit buyers seeking two operating methods; the supplied details include a socket set.
Drill-compatible power operation is the FZZD jack’s clearest advantage, giving owners a faster alternative to turning its manual crank. The 5,000-pound-rated A-frame jack also preserves manual operation for precise adjustments, so buyers can choose a method to suit the towing task.
The supplied socket set supports the listed drill-powered operation, while the manual crank provides a second way to raise or lower the trailer. Compatibility is specified for 20–24V cordless drills, so the power option depends on using a drill in that voltage range. Its heavy-duty carbon-steel construction and spray-coated surface are described as providing strength and corrosion resistance. The 5,000-pound capacity makes it relevant to buyers whose trailer-jack needs fall within that rating.
- 5,000-pound load capacity
- Power or manual operation
- Compatible with 20–24V cordless drills
- Socket set included
- Power operation is specified only for 20–24V cordless drills.
Skip it if you own only a cordless drill outside the specified 20–24V range and want powered operation.
This FZZD fits trailer owners with a compatible 20–24V drill who want powered lifting plus manual backup. Its 5,000-pound rating and drill-voltage requirement are the key considerations for matching it to a setup.
Full product details
| Brand | FZZD |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 5.3 x 5.3 x 23.2 inches |
| Item Weight | 15 pounds |
| Load Capacity | 5000 Lbs |
| Manufacturer | FZZD |
| Part Number | HZ-03-A |
| Material | Alloy Steel |
| Model Number | HZ-03-A |
| Style Name | A-Frame |
Listed on Amazon as: FZZD 5000 lbs A-Frame Trailer Jack, 20-24V Cordless Drill Compatible
View on Amazon
#5
5. YOMILINK 5000 lbs A-Frame Jack
- Load Capacity: 5000 lb
- Dimensions: 23 x 5.5 x 5.5 in
- Material: High Carbon Steel
- Weight: 14 lb
Best for: Multi-height RV setups.
Why it ranks #5: The 5,000-pound capacity, five-level height adjustment, and stated 23.2-to-45.6-inch range offer broad adjustment, though mounting-pattern fit is not specified.
Five-level height adjustment is the defining feature of the YOMILINK A-frame jack, letting owners choose among several positions to level a trailer. It pairs that adjustment with a 5,000-pound capacity and a stated 23.2-to-45.6-inch height range for a wide variety of trailer profiles.
The five adjustment levels let users select a height rather than relying on one setting, which supports its stated aim of keeping a trailer level. A 23.2-to-45.6-inch range addresses both high- and low-profile trailer setups, while the 5,000-pound rating covers substantial tongue-jack lifting demands. Its high-carbon-steel construction is specified for the jack, and the product listing names RVs, campers, boat trailers, utility trailers, and other trailer types as compatible vehicle categories.
- 5,000-pound load capacity
- Five-level height adjustment
- 23.2-to-45.6-inch height range
- High-carbon-steel construction
- Its listed adjustment is five-level rather than continuously variable.
Skip it if you want a continuously variable height setting rather than the listed five-level adjustment.
This YOMILINK suits RV and trailer owners who want multiple height positions and a 5,000-pound rating. Its five-level adjustment is the key fit consideration for buyers who prefer selecting among defined settings.
Full product details
| Brand | YOMILINK |
|---|---|
| Color | black |
| Compatible with Vehicle Type | RV, Trailers, Travel Trailers, Utility Trailers, Campers, Fifth Wheels, Boat Trailers, Marine Trailers, Jet Ski Trailers |
| Included Components | Comes with housing |
| Item Dimensions | 23 x 5.5 x 5.5 inches |
| Item Weight | 14 pounds |
| Load Capacity | 5000 pounds |
| Manufacturer | YOMILINK |
| Part Number | YM-TJS-5K |
| Manufacturer Warranty Description | NoWarningApplicable |
| Material | High Carbon Steel |
| Model Number | YM-TJS-5K |
| Style Name | Tongue Jack |
Listed on Amazon as: YOMILINK 5000 lbs A-Frame Trailer Jack, 15" Lift, Adjustable Drop Leg
View on Amazon
#6
6. TYT 5000 lbs A-Frame Jack
- Load Capacity: 5000 lb
- Dimensions: 20 x 5 x 5 in
- Material: Zinc
Best for: High-capacity top-wind trailers.
Why it ranks #6: This A-frame model lists 5,000-pound capacity, 15-inch top-wind travel, a foot plate, and a black sandblast coating for corrosion resistance.
A 5,000-pound rating and 15-inch top-wind vertical travel make the TYT A-frame jack a strong match for owners needing substantial trailer-tongue support with manual height adjustment. Its black sandblast coating is specified for corrosion resistance, and the product listing includes a foot plate.
The 15-inch top-wind travel lets users raise or lower the trailer through a defined vertical range, while the 5,000-pound capacity sets the intended load boundary. The top-wind mechanism suits buyers who prefer manual handle operation. TYT identifies the black sandblast coating as corrosion-resistant, a relevant detail for trailers used outdoors, and the included foot plate adds a contact surface at the ground. The listing names RV, boat, utility, and camping trailers among its intended applications.
- 5,000-pound lifting capacity
- 15-inch top-wind vertical travel
- Black sandblast coating specified for corrosion resistance
- Foot plate included
- Its 15-inch vertical travel may not provide enough range for setups needing more.
Skip it if you require more than 15 inches of vertical travel; the POPBULL 5000lbs A-Frame Trailer Jack lists a 30-inch lift.
The TYT suits RV, boat, utility, or camping-trailer owners seeking 5,000-pound support and top-wind operation. Its 15-inch travel is the main fit boundary for buyers comparing required adjustment range.
Full product details
| Brand | TYT |
|---|---|
| Color | 15" A Farme Trailer Jack w/foot |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 20 x 5 x 5 inches |
| Load Capacity | 5000 pounds |
| Manufacturer | TYT |
| Part Number | TTJ-1500-ALL |
| Material | Zinc |
| Model Number | 5000 LBS A-frame Trailer Jack |
| Style Name | Tongue Jack |
Listed on Amazon as: TYT Heavy Duty 5000lbs A-Frame Trailer Jack with 15" Top-Wind Vertical Travel, Black Sandblast Coating, and Foot Plate for RVs, Boat, Utility, and Camping Trailers
View on Amazon
#7
7. Pafessa 2000 lb Sidewind Jack
- Load Capacity: 2000 lb
- Dimensions: 22.05 x 5.52 x 4.73 in
- Material: High Carbon Steel
- Weight: 10.8 lb
Best for: Wide-footprint utility support.
Why it ranks #7: The 2,000-pound manual sidewind jack has 15 inches of travel, a 6-inch footpad, and stated compatibility with 2.25-inch mounting holes.
A six-inch-diameter footpad is the Pafessa jack’s distinctive support feature, intended to help prevent sinking as it supports a trailer. It pairs that footprint with 15 inches of travel and a 2,000-pound lift capacity, making its rated load and mounting-hole fit central to the choice.
The six-inch footpad is specified to help prevent sinking, a useful consideration when the ground beneath a parked trailer may be soft. Its 15-inch travel provides vertical adjustment, while the 2,000-pound rating sets the lifting-capacity boundary. This is a manual sidewind A-frame jack, so raising and lowering use the sidewind operation rather than drill power. The listing states that it fits 2.25-inch mounting holes, giving buyers a concrete installation dimension to compare with their trailer.
- 2,000-pound lift capacity
- 15-inch travel
- Six-inch footpad helps prevent sinking
- Fits 2.25-inch mounting holes
- Its 2,000-pound capacity is limited to loads within that rating.
Skip it if you need more than 2,000 pounds of lifting capacity; the TOWKING 5000 lbs Side Wind A Frame Trailer Jack is rated higher.
Choose this Pafessa for a utility trailer or camper setup within 2,000 pounds where a six-inch footpad is useful. Its stated 2.25-inch mounting-hole fit and manual sidewind operation are key setup considerations.
Full product details
| Brand | Pafessa |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | Comes with housing |
| Item Dimensions | 22.05 x 5.52 x 4.73 inches |
| Item Weight | 10.8 pounds |
| Load Capacity | 2000 pounds |
| Manufacturer | Pafessa |
| Part Number | C24-1612 |
| Manufacturer Warranty Description | If you have any questions, please feel free to contact us and we will do our best to answer your questions. |
| Material | High Carbon Steel |
| Model Number | Ultra C24-1512 |
| Style Name | 2000LB Trailer Tongue Jack |
Listed on Amazon as: Trailer Tongue Jack 2000lb Lift Capacity, 15" Lift A-Frame Heavy Duty – Manual Sidewind Utility Trailer Jack for RV Camper
View on Amazon
#8
8. MaxxHaul 70159 A-Frame Jack
- Load Capacity: 2000 lb
- Dimensions: 21 x 6 x 5 in
- Material: Zinc
- Weight: 9 lb
Best for: Simple top-wind tongue lifting.
Why it ranks #8: This 2,000-pound A-frame jack offers 14 inches of lift, top-wind operation, and bolt-on or weld-on installation, but has less capacity and travel than higher-ranked options.
The top-wind handle with a swivel grip gives the MaxxHaul 70159 a straightforward manual lifting setup, rated for 2,000 pounds of trailer tongue weight. Its 14-inch lift and bolt-on or weld-on mounting make it a practical option for owners seeking a conventional A-frame jack.
The 14-inch lift provides vertical adjustment for coupling and supporting a trailer, while the 2,000-pound rating defines the tongue-weight capacity to consider. Its top-wind handle uses a swivel grip, specified to make raising and lowering more comfortable. The A-frame mount can be bolted or welded to the trailer tongue, allowing the installation method to suit the setup. A powder-coat finish is listed, and the product description also names zinc plating as a durability measure against the elements.
- 2,000-pound capacity
- 14-inch lift
- Top-wind handle with swivel grip
- Can be bolted or welded
- Its 2,000-pound capacity limits it to setups within that rating.
Skip it if you need a jack rated above 2,000 pounds; the TYT Heavy Duty 5000lbs A-Frame Trailer Jack offers a higher listed capacity.
The MaxxHaul 70159 fits owners seeking a manually operated A-frame jack for trailer tongue loads within 2,000 pounds. Its 14-inch lift and top-wind grip are useful considerations when comparing working height and handle style.
Full product details
| Brand | MAXXHAUL |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Item Dimensions | 21 x 6 x 5 inches |
| Item Weight | 9 pounds |
| Load Capacity | 2000 pounds |
| Manufacturer | Maxxtow Towing Products |
| Part Number | 70159 |
| Manufacturer Warranty Description | 90-Day Warranty |
| Material | Zinc |
| Model Number | 70159 |
| Style Name | A-Frame Mount |
Listed on Amazon as: MaxxHaul 70159 14" Lift A-Frame Mount Trailer Jack with Top Wind – 2000 lbs. Capacity
View on Amazon
#9
9. VEVOR 2000 lbs A-Frame Jack
- Load Capacity: 2000 lb
- Dimensions: 6.3 x 6.3 x 25 in
- Material: Welded Tube + Cold Rolled Steel Plate + 45#…
- Weight: 11 lb
Best for: Light-duty horse trailers.
Why it ranks #9: Its 2,000-pound capacity, 13-3/4-inch vertical travel, included crank, and bolt-or-weld installation may suit lighter trailers; the listing does not specify bolt-pattern fit.
A 2,000-pound capacity makes this VEVOR A-frame jack the lower-capacity choice in this group, suited to trailer setups within that rating. Its 133⁄4-inch vertical travel and swivel function add useful height adjustment and a way to swing the jack up when it is not supporting the trailer.
The 133⁄4-inch vertical travel helps accommodate different trailer-tongue heights, while the listed compatibility with high- and low-profile trailers broadens its use. The swivel function lets the jack swing up when not in use, and installation can be bolted or welded to the tongue. VEVOR supplies a crank handle and manual, with the jack made from the listed combination of welded tube, steel plate, and other materials. Keep its 2,000-pound capacity in mind when choosing it.
- 133⁄4-inch vertical travel
- Swivel function swings the jack up
- Bolted or welded installation
- Crank handle and manual included
- Its 2,000-pound capacity is below the 5,000-pound options in this group.
Skip it if you need more than 2,000 pounds of lifting capacity; the VEVOR 5000 lbs A-Frame Trailer Jack is rated higher.
Choose this VEVOR for a horse or utility trailer setup within its 2,000-pound rating, especially if swivel storage and 133⁄4 inches of travel matter. Confirm that its capacity suits the trailer-jack load.
Full product details
| Brand | VEVOR |
|---|---|
| Color | Black |
| Compatible with Vehicle Type | Trailer |
| Included Components | 1 x Trailer Jack 1 x Crank Handle 1 x Manual |
| Item Dimensions | 6.3 x 6.3 x 25 inches |
| Item Weight | 11 pounds |
| Load Capacity | 2000 Pounds |
| Manufacturer | VEVOR |
| Part Number | Trailer Jack 2000 lb |
| Material | Welded Tube + Cold Rolled Steel Plate + 45# Steel + Powder Metallurgy Materials |
| Model Number | TJA-2000-B+JF-100-Z |
| Style Name | 2000LBS |
Listed on Amazon as: VEVOR 2000 lbs A-Frame Trailer Jack, 13-3/4 Inches Vertical Travel, Trailer Jack Stand with Handle for Horse
View on Amazon
#10 · Highest Capacity
10. POPBULL 8000 lb Swivel Jack
- Load Capacity: 8000 lb
- Dimensions: 25 x 9.98 x 6 in
- Material: Iron
- Weight: 23 lb
Best for: Higher-capacity heavy trailers.
Why it ranks #10: The 8,000-pound capacity and 30-inch lift are the highest listed, but its swivel bolt-on hydraulic format is a less direct match for a three-bolt A-frame search.
An 8,000-pound capacity sets this POPBULL jack apart for heavier trailer-tongue lifting, while its 30-inch maximum lift and adjustable drop leg provide height adjustment. The swivel, bolt-on design adds a way to move the jack aside when it is not supporting the trailer.
The 30-inch maximum lift offers substantial height adjustment, and the adjustable drop leg provides another way to set the jack for a trailer tongue. Its 8,000-pound rating suits loads beyond the capacity of the 5,000-pound jacks in this group. The jack is described as heavy-duty steel with a corrosion-resistant zinc coating, including resistance to road salt. Its swivel bolt-on format can be secured to the trailer and swung aside when no longer needed for support.
- 8,000-pound load capacity
- 30-inch maximum lift
- Adjustable drop leg
- Swivel bolt-on design with zinc coating
- Its 23-pound listed weight makes it heavier to handle during installation.
Skip it if you need a jack rated above 8,000 pounds; this model's listed capacity stops at 8,000 pounds.
Choose this POPBULL for RV, utility-trailer, or yacht owners who need up to 8,000 pounds of capacity and extended lift. Its 23-pound listed weight and swivel bolt-on installation are relevant handling and setup considerations.
Full product details
| Brand | POPBULL |
|---|---|
| Color | black |
| Compatible with Vehicle Type | Livestock Hauler, RV Trailer, Receiver-style trailer |
| Included Components | No |
| Item Dimensions | 25 x 9.98 x 6 inches |
| Item Weight | 23 pounds |
| Load Capacity | 8000 Pounds |
| Manufacturer | POPBULL |
| Part Number | POPPL4TJ05 |
| Manufacturer Warranty Description | 1 year |
| Material | Iron |
| Model Number | POPPL4TJ05 |
| Style Name | Hydraulic |
Listed on Amazon as: 8000lbs Heavy Duty Trailer Jack, 30" Lift Swivel Bolt-on Trailer Jack with Adjustable Drop Leg for RVs, Utility Trailers, and Yachts
View on AmazonWhy bolt count alone does not establish fit
A jack’s bolt count alone does not confirm that it will fit your trailer; the hole spacing and mounting geometry must also match. The supplied listings do not establish a three-bolt pattern for the A-frame models. POPBULL 5000 lbs Drill Jack mentions three mounting holes, but that detail alone does not confirm the spacing or that it matches your trailer.
Pafessa 2000 lb Sidewind Jack lists compatibility with 2.25-inch mounting holes, but does not state a three-bolt pattern either. Before removing an existing jack, record the number of holes, their center-to-center spacing, the mounting plate dimensions, and the opening or clearance around the trailer tongue.
Compare those measurements with the seller’s drawing or installation instructions. If no drawing is available, ask the manufacturer to verify the pattern. Do not assume that a jack labeled A-frame shares your particular three-bolt layout.
Avoid choosing capacity from trailer weight alone
A jack’s stated capacity should be compared with the load it must support at the tongue, not automatically with the trailer’s full loaded weight. This set ranges from 2,000-pound models, including MaxxHaul 70159 A-Frame Jack, to the 8,000-pound POPBULL 8000 lb Swivel Jack. Those figures describe listed jack capacity, but the supplied data does not explain how each manufacturer defines capacity or the safe working conditions.
Likewise, lift figures are not directly interchangeable: VEVOR 5000 lbs A-Frame Jack lists a 9.65-to-24.64-inch range, while TOWKING 5000 lbs A-Frame Jack specifies 15 inches of movement and a separate 10-inch drop leg. Confirm the jack’s required support load, mounting fit, and working height together.
Excess capacity cannot correct an incompatible mounting pattern or insufficient clearance.
How to Choose a Three-Bolt Trailer Jack
Capacity for tongue load
Look for a listed capacity that safely covers the load the jack will support at the tongue, and verify the manufacturer’s guidance for your setup. The products span 2,000 pounds for VEVOR 2000 lbs A-Frame Jack, MaxxHaul 70159 A-Frame Jack, and Pafessa 2000 lb Sidewind Jack; several models list 5,000 pounds, while POPBULL 8000 lb Swivel Jack lists 8,000 pounds. These are product capacities, not a measurement of your trailer’s tongue weight.
The 2,000-pound end may fit a lighter-duty application if the load and manufacturer guidance agree; heavier loads may call for a higher-rated model. Do not choose solely from gross trailer weight, and do not use extra capacity as a substitute for confirming the mounting pattern.
Lift range and adjustment
Choose enough travel to handle your trailer’s coupling and leveling heights without running out of extension. Listed figures vary: MaxxHaul 70159 A-Frame Jack has 14 inches of lift; Pafessa 2000 lb Sidewind Jack and TYT 5000 lbs A-Frame Jack list 15 inches; VEVOR 5000 lbs A-Frame Jack gives a 9.65-to-24.64-inch range. TOWKING 5000 lbs A-Frame Jack adds a 10-inch drop leg to its stated 15-inch movement, while POPBULL 8000 lb Swivel Jack lists a 30-inch lift.
Measure the height you need from the mounting surface to the ground in both parked and connected positions. A larger range or drop leg may suit uneven ground or varying hitch heights; a shorter range may be enough when the trailer sits consistently.
Operating method and installation
Decide whether you want manual cranking, drill-compatible operation, or a swivel design, then verify the mounting method fits your trailer. MaxxHaul 70159 A-Frame Jack uses a top-wind handle, while VEVOR 5000 lbs A-Frame Jack includes a crank and lists bolt-or-weld installation. FZZD 5000 lbs A-Frame Jack and POPBULL 5000 lbs Drill Jack allow drill or manual operation; POPBULL 5000 lbs Drill Jack also lists three mounting holes and bolt-or-weld installation.
These details do not establish a matching three-bolt pattern, so compare actual hole spacing before purchase. Manual operation favors buyers who do not want to rely on a compatible drill; drill operation may suit frequent adjustments.
Check whether welding is appropriate for your trailer and installation plan.
Which Three-Bolt Trailer Jack Should You Choose?
For a versatile A-frame starting point, choose VEVOR 5000 lbs A-Frame Jack: it lists 5,000-pound capacity, a broad lifting range, bolt-or-weld installation, and a crank. If you want drill-assisted operation, POPBULL 5000 lbs Drill Jack lists 20–24V compatibility and three mounting holes, while FZZD 5000 lbs A-Frame Jack offers drill or manual operation. For extra adjustment through a drop leg, consider TOWKING 5000 lbs A-Frame Jack.
If your required capacity is above the 5,000-pound options, POPBULL 8000 lb Swivel Jack lists 8,000 pounds, but its swivel format is a less direct A-frame match. For every option, verify the actual three-bolt pattern, dimensions, required tongue-load capacity, and working height before ordering; the listings do not confirm universal three-bolt compatibility.
Frequently Asked Questions
How do I measure a trailer jack’s bolt pattern and mounting-hole spacing?
Measure center to center between the mounting holes, then note how the holes are arranged and their diameters. Compare those measurements with the jack’s mounting plate or listing, and check the trailer frame for clearance. Do not assume that a three-hole plate fits every three-bolt pattern; confirm the actual layout before ordering.
How much tongue-weight capacity should a replacement trailer jack have?
Choose a jack rated to support at least the trailer’s actual tongue weight, and confirm the rating applies to the intended use. Trailer weight alone does not establish tongue weight. Check the trailer or load information, account for how it will be positioned, and avoid exceeding the jack’s listed capacity.
Can I use an A-frame jack on a trailer with a different mounting pattern?
Only if the jack’s mounting arrangement can be securely matched to the trailer. A-frame shape alone does not confirm that the bolt pattern, hole spacing, or plate dimensions will fit. Compare the actual measurements and installation requirements before buying; the listed options do not establish universal three-bolt compatibility.
What working-height details should I check before choosing a jack?
Check the trailer’s coupling height and the range needed to raise or level it, including any uneven ground or loaded condition relevant to your use. Compare that need with the jack’s listed lifting range and travel. A stated lift alone does not confirm that the jack will reach your required working height.
Should I choose a manual, drill-assisted, or swivel jack?
Choose based on the operation and installation your trailer requires. Manual models use a handle or crank; drill-compatible listings may offer drill-assisted operation but require checking the stated voltage compatibility. A swivel jack can offer a different mounting and stowing format, so verify its fit and use case against your trailer.
Final Words
For a versatile A-frame starting point, the VEVOR 5000 lbs model lists a 5,000-pound capacity, a 9.65-to-24.64-inch lifting range, bolt-or-weld installation, and a crank handle. Consider POPBULL or FZZD if drill operation matters, or the listed 8,000-pound swivel jack if you need higher capacity and its format suits your trailer. Before ordering any option, verify the mounting pattern, dimensions, tongue load, and working height.

