Best 2 In Leveling Kit for Popular Pickup Trucks

#1 · Best Overall

1. MotoFab Lifts F150-2

• Material: Aluminum
• Material Type: Aluminum

Best for: F-150 simpler-installation seekers.

Why it ranks #1: Fits F-150 2WD and 4WD across the listed model years, claims a true 2-inch lift, and avoids strut or coil disassembly during installation.

MotoFab specifies a true 2-inch front lift and says installation does not require strut or coil disassembly. That combination gives compatible F-150 owners a clearly stated lift amount and a more direct installation workflow, with the maker estimating the job at about 11⁄2–2 hours.

The CNC-machined billet-aluminum spacers receive a black powdercoat intended to match the factory suspension, pairing a defined finish with the metal construction. Two front lift spacers, hardware, and instructions are included, so the kit supplies the listed components for installation. Fitment covers F-150 2WD and 4WD models from 2004–2026. The stated installation time and lack of strut/coil disassembly are useful planning details, though actual work still depends on the vehicle and installer.

Skip it if you need a kit for an F-150 outside the listed application; Rough Country 52200 also lists F-150 fitment and tire clearance up to 33 inches.

This fits F-150 owners who value a stated true 2-inch lift and an installation process that avoids strut or coil disassembly. Its listed application is F-150 2WD and 4WD, so it is not a broad multi-model kit.

Listed on Amazon as: MotoFab Lifts F150-2 – 2 in Front Leveling Lift Kit That is compatible with F150

#2 · Broad F-150 Fitment

2. KSP F150 Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: F-150 aluminum spacer buyers.

Why it ranks #2: Lists F-150 2WD and 4WD fitment across many model years, plus Expedition and Lincoln Mark LT compatibility, with forged aluminum spacers and grade 12.9 bolts.

Forged 6061-T6 aircraft-grade aluminum spacers give this KSP kit a metal alternative to plastic-composite leveling parts for compatible F-150s. The listed application spans 2004–2026 F-150 2WD and 4WD models, with additional fitment for specified Expedition and Lincoln Mark LT vehicles.

The CNC-machined 6061-T6 billet spacers are presented as a durable suspension component, while the included 12.9-grade bolts address the hardware used during installation. Together, those materials and fasteners may matter to owners preparing a truck for demanding use. Compatibility covers a broad F-150 model-year range plus Expedition models from 2003–2018 and Lincoln Mark LT; the supplied details do not provide an installation-time estimate or a complete trim-level fitment list.

Skip it if you need a stated installation-time estimate or detailed trim exclusions; MotoFab Lifts F150-2 lists a 11⁄2–2-hour installation and no strut/coil disassembly.

This is for F-150 owners prioritizing aluminum spacers and upgraded 12.9-grade hardware, with listed applications extending to certain Expedition and Mark LT models. Review vehicle-specific fitment before choosing, as the supplied details do not enumerate trim exclusions.

Listed on Amazon as: KSP 2-inch Leveling Kit for F150 (2004-2026) 2WD 4WD, Forged Aircraft Aluminum Front Lift Spacers, Compatible with Ford Expedition 03-18 & Lincoln Mark LT, Heavy Duty 12.9 Grade Bolts – 2" Lift

#3 · Tire Clearance

3. Rough Country F-150 Kit

• Material: Composite, Metal
• Material Type: Composite, Metal

Best for: F-150 tire-clearance seekers.

Why it ranks #3: Offers a 2-inch lift for listed F-150 and Raptor applications and specifies fitment for tires up to 33 inches, with strut extensions and hardware included.

A 2-inch bolt-on strut-spacer lift is listed to accommodate tires up to 33 inches on compatible F-150s. Rough Country pairs that lift with a heavy-duty proprietary composite spacer intended not to rust or corrode, making it relevant to owners seeking added tire room and a level stance.

The supplied description says the kit levels the factory nose-down rake while maintaining a smooth ride, connecting the added front height to both appearance and everyday handling. Its two strut extensions and hardware form the installation package, and the listed bolt-on format points to a direct spacer-based workflow. The stated tire clearance is up to 33 inches, but buyers should account for the requirement to recheck fasteners after the first 500 miles and every 1,000 miles thereafter.

Skip it if you need a kit expressly listed for 2004–2026 F-150s; MotoFab Lifts F150-2 covers that range and specifies no strut/coil disassembly.

This suits compatible F-150 owners seeking a bolt-on 2-inch level and tire clearance up to 33 inches. Confirm the vehicle’s application, and plan on the specified recurring fastener checks after installation.

Listed on Amazon as: Rough Country 2" Leveling Kit for Ford F-150 (2009-2026) & Ford Raptor (2017-2018) – Bolt-on Strut Spacer, Fits up to 33" Tires

#4 · Aircraft Aluminum

4. KSP Silverado Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: GM 1500 aluminum spacer option.

Why it ranks #4: Fits listed Silverado and Sierra 1500 2WD and 4WD applications and provides a 2-inch front lift with aircraft-grade aluminum spacers.

Forged aircraft-grade aluminum spacers provide a 2-inch front lift for listed Silverado and Sierra 1500 2WD and 4WD trucks. KSP states that lift height differs from spacer thickness, a useful distinction when comparing kit dimensions with the resulting change in front ride height.

The two-piece spacer set is specified for 2007–2026 Silverado and Sierra 1500 models, giving buyers a defined truck application across both drivetrains. Its forged aircraft-grade aluminum construction is presented as a safety-focused material choice for demanding riding conditions. Because suspension geometry makes lift height and spacer thickness non-equivalent, the stated 2-inch result should guide expectations rather than measuring the parts themselves; the listing also recommends an alignment after installation.

Skip it if you own a Trail Boss or AT4; MAXRACING MLK-2 lists Silverado and Sierra 1500 fitment but also has its own trim and configuration exclusions.

This is for Silverado and Sierra 1500 owners seeking a 2-inch front lift from forged aluminum spacers. It excludes Trail Boss and AT4 models, and the listing recommends alignment after the suspension work.

Listed on Amazon as: KSP 2" Silverado Leveling Lift Kits, 2in Front Suspension Lift Spacers Compatible With Chevy Silverado GMC Sierra 1500 2007-2026, 2pcs Aluminum Strut Spacers Increase 2inch Space on Pickup&Trucks

#5

5. Maxracing Silverado Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Silverado and Sierra owners.

Why it ranks #5: Lists fitment for Silverado and Sierra 1500 along with several related GM SUVs, and claims a 2-inch front lift from billet-aluminum spacers.

A 2-inch front lift from CNC-machined, anodized billet-aluminum strut spacers gives compatible Silverado and Sierra 1500 trucks extra front height. The listed fitment also includes select 2WD and 4WD Tahoe, Avalanche, Suburban, and Yukon 1500 models, making this a broad GM-truck and SUV option.

The included strut spacer, installation hardware, and guide provide the core pieces for a front-suspension leveling installation. Its stated 2-inch lift is not the spacer’s physical thickness—the listing puts that at about 1 inch—so buyers should distinguish lift height from part dimensions. Compatibility covers specified Silverado and Sierra 1500 models as well as several GM 1500 SUVs, but the exclusions are substantial: some trims and model-year configurations are not supported.

Skip it if you own an excluded Denali, ZR2, TrailBoss, AT4, or MagneRide model; KSP Performance 9F001-20 is another listed Silverado/Sierra option with its own stated exclusions.

This suits owners of compatible Silverado, Sierra, or listed GM 1500 SUVs seeking a 2-inch front lift with billet-aluminum spacers. Check the detailed exclusions carefully, especially for newer body styles and specialty trims.

Listed on Amazon as: Maxracing 2" Leveling Kit Compatible with 2007-2026 Silverado Sierra 1500

#6

6. Rough Country GM 1500 Kit

• Material: Polypropylene
• Material Type: Polypropylene

Best for: GM owners avoiding strut removal.

Why it ranks #6: Provides a 2-inch leveling lift for listed GM 1500 trucks and SUVs, includes lower strut mount extensions, and specifies fitment for tires up to 32 inches.

Lower strut-mount extensions let this Rough Country kit level the front without disassembling the struts. For listed GM 1500 trucks and SUVs, that bolt-on installation approach is paired with a stated ability to run tires up to 32 inches and maintain an OEM-like ride.

The polypropylene kit includes two lower front strut-mount extensions and mounting hardware, giving the installation a defined set of components. Rough Country says the extensions increase ground clearance for on- and off-road obstacles while leveling the front with the rear. The listing also says the factory upper-control-arm type is supported, a helpful compatibility detail. Buyers should note the stated vehicle range—2007–2018 Chevy/GMC 1500 and 2007–2021 SUVs—and the recurring fastener-check guidance.

Skip it if you have a later-model Silverado or Sierra beyond the stated truck range; KSP Performance 9F001-20 lists Silverado and Sierra 1500 fitment through 2026.

This suits owners within the listed GM truck and SUV ranges who want front leveling without strut disassembly and clearance for tires up to 32 inches. Check the separate truck and SUV year ranges before selecting it.

Listed on Amazon as: Rough Country 2" Leveling Kit for 2007-2018 Chevy/GMC 1500 | 07-21 SUV – 1307

#7

7. Dynofit Silverado Kit

• Material: 6061-T6 Aluminum
• Material Type: 6061-T6 Aluminum

Best for: Silverado and Sierra 2WD/4WD.

Why it ranks #7: Lists Silverado and Sierra 1500 2WD and 4WD fitment, uses 6061-T6 aluminum, and specifies a 2-inch front lift with a two-year manufacturer warranty.

6061-T6 aluminum front spacers provide a stated 2-inch lift for listed 2007–2026 Silverado and Sierra 1500 trucks in 2WD or 4WD. The kit excludes Trail Boss and AT4 models, giving buyers a clear application boundary alongside its broad standard-trim year range.

Dynofit specifies that the lift height is not equal to spacer thickness, because installing a strut spacer changes the lower-control-arm angle. That context helps set expectations when assessing the parts against the resulting front lift. The included front strut spacers and lug nuts support the listed suspension application, while the 6061-T6 aluminum material provides a named construction detail. Fitment covers both drivetrains, but not the Trail Boss or AT4 versions.

Skip it if you need a kit for a Trail Boss or AT4; MAXRACING MLK-2 also lists Silverado and Sierra 1500 applications, though it has separate model exclusions.

This is for standard Silverado and Sierra 1500 owners seeking a 2-inch front lift with 6061-T6 aluminum spacers. Its listed range covers 2007–2026 2WD and 4WD, but excludes Trail Boss and AT4 models.

Listed on Amazon as: Dynofit 2 Inch Leveling Kit for Silverado 1500 2WD/4WD 2007-2026, Front Lift Spacers Kit Compatible with GMC Sierra 1500 2WD/4WD 2007-2026 | 2-Piece 2" Suspension Level Kit

#8

8. MotoFab Ram 1500 Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Ram 1500 4WD installation option.

Why it ranks #8: Claims a true 2-inch lift and uses billet aluminum, with listed fitment for Ram 1500 4WD; it does not fit 2WD models.

A stated true 2-inch front lift and no required strut or coil disassembly define this MotoFab kit for listed Ram 1500 4WD pickups. The maker estimates installation at about 11⁄2–2 hours, giving owners a concrete planning reference for the spacer-based job.

CNC-machined billet-aluminum spacers receive a black powdercoat intended to match the factory suspension, combining a specified material with a factory-coordinating finish. Hardware and instructions are included to support the installation. Fitment is limited to Dodge Ram 1500 4WD models from 2006–2025; the listing explicitly excludes 2WD. The stated lift amount and installation approach help set expectations, while vehicle drivetrain is the primary boundary for choosing this kit.

Skip it if you have a 2WD Ram 1500; Dynofit 031-20 lists Ram 2500 and 3500 4WD applications, not Ram 1500 fitment.

This fits owners of listed 2006–2025 Ram 1500 4WD pickups seeking a true 2-inch front lift without strut or coil disassembly. The explicit 2WD exclusion makes drivetrain the essential fit boundary.

Listed on Amazon as: MotoFabLifts DR-2-2" Front Leveling Lift Kit Compatible with Dodge Ram 1500 Pickup 4WD

#9

9. Maxracing Super Duty Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Super Duty 4WD front leveling.

Why it ranks #9: Uses billet aluminum for a claimed 2-inch lift on listed F-250 and F-350 4WD models, but excludes Tremor trims and does not fully level 2017 models.

Billet-aluminum spacers with a slight locating lip give this MAXRACING kit a specific fit for 2005–2026 F-250 and F-350 Super Duty 4WD trucks. The lip is described as helping the spacer lock in, while the kit aims to add ground clearance and level front-to-rear stance.

The aluminum spacer material is intended to match the factory suspension and resist wear, while the locating lip helps position the spacer during installation. MAXRACING lists improved ground clearance and a leveled front-to-rear appearance as outcomes. Fitment has two important boundaries: the kit does not fully level 2017 models and does not work with the Tremor Factory Trim Package. Those limitations make model-specific checking especially important for this Super Duty application.

Skip it if you have a 2017 model and require full leveling, or a Tremor trim; no other listed product here is specified for those Super Duty applications.

This is for F-250 and F-350 4WD owners seeking front leveling and added ground clearance with billet-aluminum spacers. The 2017 result and Tremor exclusion are key fit boundaries to consider.

Listed on Amazon as: MAXRACING 2-Inch Suspension Leveling Kit Compatible with 2005-2026 F250 F350 Super Duty 4WD

#10

10. Dynofit Ram Heavy-Duty Kit

• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Heavy-duty Ram 4WD owners.

Why it ranks #10: Fits only listed Ram 2500 4WD and Ram 3500 4×4 applications, uses steel spacers and shock extension brackets, and excludes several package types.

Carbon-steel strut spacers paired with shock-extension brackets make this Dynofit kit a 2-inch front-lift option for listed Ram 2500 and 3500 4WD pickups. The stated purpose includes added ground clearance for obstacles and room for larger custom rims and tires.

The kit includes two steel strut spacers, two shock-extension brackets, and hardware, linking the front lift to the shock-extension components specified in the package. Its application covers Ram 2500 4WD from 2014–2026 and Ram 3500 4WD from 2013–2026. The listing connects increased frame-to-ground distance with off-road obstacle clearance and larger wheel-and-tire fitment, while excluding 2WD vehicles, Power Wagon, and Snow Prep/Ambulance packages.

Skip it if you need a kit for a Ram 1500; MotoFab Lifts DR-2 lists Ram 1500 4WD fitment, while this Dynofit kit is for specified 2500 and 3500 4WD pickups.

This suits Ram 2500 or 3500 4WD owners seeking a 2-inch front lift, added ground clearance, and larger wheel-and-tire potential. It is not for 2WD, Power Wagon, or Snow Prep/Ambulance configurations.

Listed on Amazon as: dynofit 2" Front Leveling Lift Kit for 2014-2026 Ram 2500 4WD, 2013-2026 Ram 3500 (4×4) Pick Up, Heavy Duty Steel Strut Spacers with Shock Extension Brackets