Best Jack For Lifted Truck: Compare 10 High-Reach Options

#1 · Best Overall

1. Road Dawg Floor Jack

• Load Capacity: 6600 lb
• Material: Stainless Steel
• Dimensions: 31.7 x 14.4 x 6.7 in
• Compatible with Vehicle Type: Car

Best for: High-clearance floor-jack reach.

Why it ranks #1: Its 3.86-to-30.12-inch range combines low entry with substantial reach, and the 3-ton capacity suits many truck and SUV lifting tasks.

A 3.86-to-30.12-inch lifting range gives the ROAD DAWG floor jack both low-profile access and substantial height for raised trucks. Its 3-ton capacity covers the listed light-duty and heavy-duty vehicle applications, so one floor jack can serve low-chassis cars as well as SUVs and off-road trucks.

The dual-piston system lifts loads five times faster than a single pump, reducing repeated pumping during a lift. Its reinforced, foldable lifting arm offers multiple lifting positions, while thick U-channel frame side plates add stability under load. At 102.2 pounds and 31.7 inches long, this floor jack calls for a suitable garage storage and movement plan; its broad height range can accommodate varied vehicle clearances.

Skip it if you need a jack to carry on a trail; the BUNKER INDUST portable hydraulic recovery jack includes a carry bag.

Choose this for a garage serving vehicles from low-chassis cars to high-clearance trucks, where its broad range and dual-piston lift suit varied jobs. Its 102.2-pound weight is a consideration for storage and repositioning.

Listed on Amazon as: Road DAWG Low‐Profile High‐Reach Hydraulic 3 Ton Floor Jack, Black

#2 · Maximum Lift Range

2. VEVOR Farm Jack

• Load Capacity: 7000 lb
• Material: Steel
• Dimensions: 9.1 x 5.1 x 48.2 in
• Compatible with Vehicle Type: Truck

Best for: Off-road and farm high lifting.

Why it ranks #2: The 48-inch farm jack reaches 40.74 inches and supports 7,000 pounds, making it suited to compatible off-road lifting points.

A 48-inch lift span reaches from 4.13 to 40.74 inches, giving the VEVOR farm jack substantial height for lifted trucks and off-road vehicles. Its 7,000-pound capacity and ratcheting operation also extend its use to farm tasks such as lifting agricultural machinery or moving stumps and fence posts.

Thickened steel construction supports the 7,000-pound capacity, while a hot-dip galvanized powder-spraying process provides the listed double protection for the steel. Ratchet holes spaced at 20 mm allow incremental height adjustment, and the wrench switch enables lowering. The 48.2-inch length and 27.1-pound weight suit a vehicle or work area with room to carry and operate a tall utility jack, rather than a compact floor-jack workflow.

Skip it if you need a compact jack for a small garage; the BIG RED T90413 includes a storage case and measures 7.4 by 4.72 by 11.02 inches with its case.

For off-road truck owners and farm users needing exceptional lifting height, the 40.74-inch maximum and ratchet adjustment offer broad utility. The tall 48.2-inch form is a practical storage and operating-space consideration.

Listed on Amazon as: VEVOR Farm Jack 48 inch Utility High Lift, 7000 lbs Capacity Ratcheting Off Road Jeep Jack, Heavy for Tractor, Truck, SUV, Bumper Lift, Orange

#3 · Extended-Truck Floor Jack

3. BIG RED T83006 Floor Jack

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: Extended-height truck floor jack.

Why it ranks #3: The extra saddle and stated fit for extended-height trucks pair with a 5-7/8-to-20-7/8-inch range and 3-ton capacity.

An extra saddle and a 20-7/8-inch maximum height give the BIG RED T83006 floor jack useful reach for SUVs and extended-height trucks. Its 3-ton, 6,000-pound capacity pairs with a low 5-7/8-inch minimum, covering a broad clearance span for workshop lifting across cars, vans, trucks, and SUVs.

The steel trolley jack rolls on two large steel casters and two 360-degree swivel casters, making it easier to maneuver into position in a garage. Its extra saddle is a specified feature for SUVs and extended-height trucks, while the 5-7/8-to-20-7/8-inch range allows access beneath lower vehicles and lift height for taller ones. The 36-pound weight is relevant when planning storage and movement between work areas.

Skip it if you need more than 20-7/8 inches of lift; the ROAD DAWG ATZ830027HD reaches 30.12 inches.

This suits a garage owner lifting SUVs or extended-height trucks who wants a wheeled floor jack and extra saddle. Its 20-7/8-inch maximum height is the relevant limit for taller vehicles.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#4 · Off-Road Recovery

4. BUNKER INDUST Recovery Jack

• Load Capacity: 19,400 lbs
• Material: Aluminum
• Dimensions: 16.93 x 13.31 x 6.69 in
• Compatible with Vehicle Type: ATV

Best for: Portable off-road recovery lifting.

Why it ranks #4: Its portable design includes a lift mate, supporting rod, and base, with a listed 19,400-pound capacity for off-road recovery use.

A 19,400-pound lifting capacity gives the BUNKER INDUST recovery jack substantial rated force for large SUVs and off-road trucks. Its portable kit includes a carry bag, Lift Mate, supporting rod and base, and two handles, providing several listed components for trail-side lifting rather than a garage-only floor-jack setup.

The double-ram system and adjustable support configuration are listed features for versatile lifting, while aluminum alloy and steel construction is specified as corrosion-resistant for muddy, rocky, and harsh off-road conditions. Included accessories—the Lift Mate, supporting rod and base, and two handles—expand the supplied setup, and the carry bag helps organize transport. The product is presented for SUVs, ATVs, and UTVs as well as off-road trucks.

Skip it if you need a stated minimum and maximum lift height before choosing; the ROAD DAWG ATZ830027HD lists a 3.86-to-30.12-inch range.

This package suits off-road drivers who need a portable recovery jack and the included Lift Mate and support components. A stated lifting range is not provided, so buyers needing defined height limits should consider that boundary.

Listed on Amazon as: BUNKER INDUST Portable Hydraulic Recovery Jack with Lift Mate, 4×4 Off Road Lift Jack for SUV ATV UTV, 19,400 lbs Lifting Capacity

#5 · High Bottle Jack

5. BAOSHISHAN Double Ram Jack

• Load Capacity: 4 tons
• Material: Alloy Steel
• Dimensions: 5 x 4.88 x 10.43 in
• Compatible with Vehicle Type: Car, Truck

Best for: High-clearance bottle-jack reach.

Why it ranks #5: The double-ram bottle jack reaches 24 inches and has a 4-ton capacity, though its 10.43-inch minimum height demands ample clearance.

A double-ram design extends this BAOSHISHAN bottle jack to 24 inches, giving high-clearance trucks more reach than a single-stage bottle-jack arrangement. The 4-ton capacity supports heavy lifting, but its 10.43-inch minimum height makes it specifically suited to vehicles with substantial ground clearance.

The second ram begins extending after the first reaches its maximum, providing nearly twice the lifting height noted for the design while keeping the stated capacity and volume constant. Its welded construction and integrated hydraulic cylinder support durable operation, and a built-in bypass system prevents piston-rod overtravel. Because the starting height is 10.43 inches, buyers need to account for vehicle clearance before selecting this bottle jack for a lift.

Skip it if you need a jack that starts below 10.43 inches; the VEVOR AH081048 farm jack starts at 4.13 inches.

For a high-clearance truck owner seeking a 4-ton bottle jack with 24 inches of reach, the double ram is the central advantage. Its 10.43-inch starting height is a firm fit limit.

Listed on Amazon as: BAOSHISHAN 4 Ton Double Ram Bottle Jack 10.43" to 24" Lift Range

#6

6. Powerbuilt 620471 Unijack

• Load Capacity: 6000 lb
• Material: Metallic-Fiber
• Dimensions: 9.88 x 9.75 x 11.5 in
• Compatible with Vehicle Type: Truck

Best for: Unibody truck lift-and-hold.

Why it ranks #6: Its 11-to-21-inch range and built-in ratcheting safety bar combine lifting and holding in one unit for trucks and SUVs.

A built-in ratcheting safety bar lets the Powerbuilt Unijack lift a vehicle and hold it in the raised position without a separate jack stand. Its 11-to-21-inch range and 3,000-pound capacity target pickups, SUVs, vans, and Jeeps, while the wide base suits RV and off-road use.

The bottle-jack and stand combination brings lifting and holding into one compact 9.88-by-9.75-by-11.5-inch unit, reducing the number of separate pieces involved in a roadside or garage setup. The ratcheting safety bar locks the raised stand, and the wide base adds stability on softer surfaces. Powerbuilt identifies it for regular and unibody cars and trucks; unibody vehicles still require use of their factory-approved lifting points to avoid damage.

Skip it if you need more than 3,000 pounds of capacity; the BIG RED T90413 is rated for 8,000 pounds.

For a pickup or unibody-truck owner who wants one tool to lift and hold, this compact jack has a useful 11-to-21-inch range. Use factory-approved lifting points on unibody vehicles.

Listed on Amazon as: Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

#7

7. Powerbuilt 640912 Unijack

• Load Capacity: 3 tons
• Material: Aluminum
• Dimensions: 9.75 x 9.75 x 12.25 in
• Compatible with Vehicle Type: Truck

Best for: RV and trailer lift-and-hold.

Why it ranks #7: This 3-ton all-in-one jack and stand reaches 21 inches and has a wide base, but its 11-inch minimum limits low-clearance access.

A wide base helps the Powerbuilt 3-ton Unijack resist sinking on softer surfaces, making it a practical match for leveling RVs and trailers. The bottle jack and jack stand work as one unit, and its built-in ratcheting safety bar locks the raised stand for lifting and holding.

With an 11-to-21-inch range and 3-ton capacity, this aluminum all-in-one jack suits the listed truck, SUV, RV, and trailer applications. Its integrated stand eliminates a separate jack stand, simplifying the equipment needed for a lift, while the ratcheting bar holds the raised position. Powerbuilt identifies it for regular and unibody cars and trucks, but the title specifically excludes sedans; unibody vehicles require factory-approved lifting points.

Skip it if you need a jack for a sedan; the Powerbuilt 620471 is listed for SUVs, trucks, vans, and Jeeps without that sedan exclusion.

This fits an RV, trailer, or truck owner who values a wide base and integrated stand for lifting and holding. Its title excludes sedans, so that vehicle category is outside the stated fit.

Listed on Amazon as: POWERBUILT 3 Ton All-in-One Hydraulic Bottle Jack and Jackstand in One, Compact, Wide Base, 11-21 Inch Range, Eliminates Jackstands, for Trucks, SUVs, RVs, Trailers, ASME, Not for Sedans – 640912

#8

8. AUTOWN 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel, Aluminum
• Dimensions: 23.4 x 7.4 x 7.5 in
• Compatible with Vehicle Type: SUV Truck

Best for: Alloy-steel SUV and truck lifting.

Why it ranks #8: Its 7.1-to-20.9-inch range and 6,600-pound capacity suit pickups and full-size SUVs, but it offers less maximum reach than higher-ranked choices.

A 7.1-to-20.9-inch lifting range targets pickups, full-size SUVs, crossovers, and vans, giving the AUTOWN floor jack height for many higher-clearance vehicles. Its 6,600-pound capacity pairs that reach with alloy-steel construction for demanding garage lifting, while the cross-shape rubber pad provides a specified contact feature.

The alloy-steel hydraulic design supports a 6,600-pound load capacity, and the stated high-clearance range lets owners lift vehicles whose frame clearance suits a 7.1-inch minimum. Its quick-lift system is identified as a feature, although no pump count or lift-speed figure is supplied. The cross-shape rubber pad is the specified lifting-pad detail; checking clearance against the minimum height before choosing this jack helps avoid a mismatch.

Skip it if you need a minimum lift height below 7.1 inches; the BIG RED T83006 starts at 5-7/8 inches.

This suits a pickup or SUV owner needing a 6,600-pound floor jack with a 20.9-inch maximum lift. Its 7.1-inch minimum is the key boundary, so verify the vehicle’s frame clearance against that figure.

Listed on Amazon as: AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)

#9

9. DNA Motoring 6 Ton Bottle Jack

• Load Capacity: 6 Ton
• Material: Alloy Steel
• Dimensions: 7.8 x 6 x 12.1 in
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck

Best for: Six-ton truck bottle-jack capacity.

Why it ranks #9: The 12,000-pound capacity is the highest listed for a conventional bottle jack here, but the supplied data gives no lifting range.

A 6-ton, 12,000-pound capacity is the defining feature of the DNA MOTORING bottle jack, giving it a high stated load rating for truck and SUV lifting. High-grade alloy steel with an anti-corrosion surface treatment and tight welding provides the listed construction details for demanding lifting work.

The welded bottle-jack format offers a compact 7.8-by-6-by-12.1-inch footprint, and its 4.5-kilogram weight can suit users who need a jack that is easier to handle than larger floor-jack equipment. The 12,000-pound rating is specified for cars, SUVs, and trucks. No lifting range is supplied in the product facts, so buyers should account for that missing height information when assessing a lifted vehicle’s clearance needs.

Skip it if you need a published lifting range for a high-clearance vehicle; the BAOSHISHAN ZKN-221a lists a 10.43-to-24-inch range.

This is for truck or SUV owners prioritizing a 12,000-pound rating in a compact welded bottle jack. Since no lifting range is stated, it is a less clear fit when precise height requirements matter.

Listed on Amazon as: DNA Motoring 6 Tons Hydraulic Car Bottle Jack, Blue, 12000 lbs Capacity

#10

10. BIG RED T90413 Bottle Jack

• Load Capacity: 4 Ton
• Material: Alloy Steel
• Dimensions: 4.27 x 3.43 x 7.5 in
• Compatible with Vehicle Type: Car

Best for: Compact high-capacity bottle jack.

Why it ranks #10: Its 8,000-pound capacity and wide base are useful specifications, but the 7.5-to-14-5/16-inch range offers limited reach for lifted trucks.

A 4-ton, 8,000-pound rating gives the BIG RED T90413 substantial capacity in a bottle jack supplied with a storage case. Its 7-1/2-to-14-5/16-inch lifting range and adjustable screw-top extension provide reach adjustment in a compact package suited to residential or commercial use.

The wide, rugged base adds stability, while drop-forged alloy steel and reinforced stress points support the jack’s listed heavy-duty construction. The adjustable screw-top extension provides additional height adjustment within the stated lifting setup, useful when working with differing contact heights. The jack, handles, and storage case are included; at 6.2 pounds, it is easy to handle, though the maximum lift remains 14-5/16 inches.

Skip it if you need a lift above 14-5/16 inches; the BAOSHISHAN ZKN-221a bottle jack reaches 24 inches.

For buyers wanting a compact, high-capacity bottle jack with a case, the T90413 combines an 8,000-pound rating with an adjustable screw top. Its 14-5/16-inch maximum height limits use on taller vehicles.

Listed on Amazon as: BIG RED 4 Ton (8,000 LBs) Hydraulic Welded Bottle Jack with Storage Case