Best 4X100 Deep Dish Wheels for a 15×8 Setup

#1 · Best Overall

1. Circuit Performance CP29 White

• Wheel Size: 15 in
• Rim Size: 15 in
• Weight: 14.7 lb

Best for: Dual-pattern 15-inch build.

Why it ranks #1: Its 15×8 size, zero offset, 4×100 compatibility, and listed 4.5-inch machined lip make it the clearest deep-dish match.

A 4.5-inch machined lip gives the Circuit Performance CP29 a prominent rim detail, while its 15×8 size and zero offset suit buyers seeking a broad, deep-dish-style profile. Its dual 4×100 and 4×114.3 bolt patterns let the same wheel specification serve either listed four-lug pattern, widening the range of potential applications.

The 15×8 width and +0mm offset define the wheel’s stance, so buyers can compare those measurements with their vehicle setup before choosing tires or planning clearance. Its 4×100/4×114.3 dual bolt pattern covers two common four-lug layouts, rather than limiting selection to one. Aluminum construction and an approximate 14.65-pound wheel weight are useful considerations when evaluating wheel mass. Installation requires tuner-style lug nuts with 60-degree conical seating, a specific hardware requirement to address before mounting.

Skip it if you need a single-pattern 15×8 wheel with +25mm offset; the Circuit Performance CP24 uses that offset and a 4×100 pattern.

A good match for buyers seeking a 15×8 aluminum wheel with a pronounced machined lip and flexibility across two bolt patterns. Check vehicle clearance and the +0mm offset for your setup, and plan for the specified conical-seat tuner lug nuts.

Listed on Amazon as: Circuit Performance CP29 15×8 Gloss White 4-100/4-114.3 [+0mm]

#2 · Dual-Pattern Pick

2. Circuit Performance CP29 Silver

• Wheel Size: 4.5 in
• Rim Size: 15 in
• Weight: 14.5 lb

Best for: Silver dual-pattern 15×8.

Why it ranks #2: The 15×8 wheel has a 4.5-inch machined lip, zero offset, and works with either 4×100 or 4×114.3 patterns.

Hyper silver color and a 4.5-inch machined lip distinguish this CP29, while its 15×8 size and zero offset deliver a clear specification for a deep-dish-style build. The 4×100/4×114.3 dual pattern makes it relevant to two listed four-lug layouts, rather than just one.

The 15×8 width, 15-inch diameter, and +0mm offset are useful starting points for comparing the wheel with a vehicle’s tire and clearance requirements. Its dual 4×100/4×114.3 pattern can serve either listed bolt arrangement, adding flexibility when selecting an application. The hyper-silver finish and 4.5-inch machined lip provide a contrasting visual edge. At an approximate 14.45 pounds per wheel, it also gives buyers a stated weight to consider. Tuner lug nuts with 60-degree conical seating are required.

Skip it if you need +25mm offset rather than zero offset; the Circuit Performance CP21 offers +25mm with a 4×100 pattern and 73.1mm hub bore.

Choose this for a silver-finish 15×8 setup where the 4.5-inch machined lip and dual bolt pattern fit the plan. The +0mm offset and required conical-seat tuner hardware remain important fitment and installation considerations.

Listed on Amazon as: Circuit Performance CP29 15×8 Hyper Silver 4-100/4-114.3 [+0mm]

#3 · Gold Finish Pick

3. Circuit Performance CP29 Gold

• Wheel Size: 4.5 in
• Rim Size: 15 in
• Weight: 14.7 lb

Best for: Gold dual-pattern lip detail.

Why it ranks #3: It retains the CP29’s 15×8 dimensions, zero offset, dual 4×100/4×114.3 pattern, and listed 4.5-inch machined lip.

A gold finish paired with a 4.5-inch machined lip gives this Circuit Performance CP29 a distinct appearance, while its 15×8 dimensions support a broad-wheel setup. Its +0mm offset and dual 4×100/4×114.3 bolt pattern provide specific fitment details for buyers weighing stance and compatibility.

The 15×8 format and +0mm offset help buyers evaluate tire width and wheel position against their vehicle setup, rather than choosing on appearance alone. Its 4×100/4×114.3 bolt pattern offers compatibility across either listed four-lug layout. A gold finish and 4.5-inch machined lip create the model’s contrasting visual treatment, and the approximate 14.15-pound wheel weight is a useful comparison point. Installation requires tuner-style lug nuts with 60-degree conical seating.

Skip it if you need a +25mm offset on a 4×100 wheel; the Circuit Performance CP24 provides that offset and a 73.1mm hub bore.

This gold CP29 suits buyers after a 15×8 wheel with a machined lip and either listed bolt pattern. Check whether its zero offset works with your clearance needs, and plan for the specified tuner lug-nut seating.

Listed on Amazon as: Circuit Performance CP29 15×8 Gold 4-100/4-114.3 [+0mm]

#4

4. Circuit Performance CP29 Gun Metal

• Wheel Size: 4.5 in
• Rim Size: 15 in
• Weight: 17 lb

Best for: Gun-metal dual-pattern stance.

Why it ranks #4: This 15×8 CP29 lists zero offset and a 4.5-inch machined lip, plus compatibility with 4×100 and 4×114.3 patterns.

The CP29 combines a 4.5-inch machined lip with gloss gun-metal color, giving this 15×8 zero-offset wheel a more pronounced edge detail. Its dual 4×100/4×114.3 pattern expands fitment options beyond a single bolt layout, while the +0mm offset is a defining dimension for stance planning.

The 15×8 size and +0mm offset give buyers the core dimensions for evaluating tire choice and clearance, particularly when comparing a zero-offset setup with their current wheels. Its 4×100/4×114.3 pattern serves either listed bolt layout, while the 4.5-inch machined lip pairs with the gloss gun-metal finish for a contrasting face detail. The approximate wheel weight is 14.45 pounds. Installation requires 60-degree conical-seat tuner lug nuts, which should be included in hardware planning.

Skip it if you want a +25mm offset for a 4×100-only setup; the Circuit Performance CP24 has that offset and a 73.1mm hub bore.

This CP29 is suited to buyers who want a gun-metal wheel with a machined lip and the flexibility of two bolt patterns. Its zero offset is a key boundary, so check vehicle clearance and hardware requirements before choosing it.

Listed on Amazon as: Circuit Performance CP29 15×8 Gloss Gun Metal 4-100/4-114.3 [+0mm]

#5 · Black Finish Pick

5. Circuit Performance CP24 Black

• Wheel Size: 15 in
• Rim Size: 8 in
• Weight: 14.3 lb

Best for: Lightweight 15×8 black face.

Why it ranks #5: The 15×8 aluminum wheel has a 4×100 pattern, +25 offset, and listed 73.1mm hub bore in a black and machined finish.

At an approximate 14.3 pounds per wheel, the CP24 offers a notably light listed weight among these 15×8 options, paired with a gloss-black and machined face. Its +25mm offset and 4×100 pattern give buyers concrete fitment figures, while the 73.1mm hub bore adds another measurement to check.

The 15×8 dimensions provide a broad wheel format, and the +25mm offset helps buyers assess how that width may position on their vehicle. Its 4×100 pattern and 73.1mm hub bore identify key fitment checks, while the approximate 14.3-pound weight is relevant when comparing wheel mass. The gloss-black/machined face combines contrasting finishes. For installation, the listed requirement is tuner-style lug nuts with a 60-degree conical seat, so existing hardware should not be assumed suitable.

Skip it if you need a dual-pattern wheel for 4×114.3 hubs; the Circuit Performance CP29 lists both 4×100 and 4×114.3.

A strong fitment candidate for buyers seeking a 15×8 wheel with a listed 14.3-pound weight and black/machined styling. Confirm the +25mm offset and 73.1mm hub-bore match, and use the specified 60-degree conical-seat tuner lug nuts.

Listed on Amazon as: Circuit Performance CP24 15×8 Gloss Black/Machined 4×100 [+25mm]

#6

6. Circuit Performance CP24 Gold

• Wheel Size: 15 in
• Rim Size: 15 in
• Weight: 14.3 lb

Best for: Gold 4×100 15×8 choice.

Why it ranks #6: Its 15×8 size and gold finish suit buyers seeking a wider look, with 4×100 fitment, +25 offset, and 73.1mm hub bore.

Gloss gold and a machined lip set the CP24 apart, while the 15×8 size makes it a full-width 15-inch choice for a 4×100 setup. Its +25mm offset and 73.1mm hub bore supply additional fitment measurements, helping buyers assess the wheel against their vehicle before installation.

The 15×8 dimensions give buyers a clear width and diameter for tire planning, while the +25mm offset is a key factor in assessing wheel position and clearance. A 4×100 pattern defines the listed bolt layout, and the 73.1mm hub bore adds another measurement to compare with the vehicle. The gloss-gold finish with machined lip provides contrasting styling. Its approximate 14.3-pound weight is listed per wheel, and installation requires 60-degree conical-seat tuner lug nuts.

Skip it if you need a wheel for 4×114.3 hubs; the Circuit Performance CP29 supports 4×114.3 as well as 4×100.

A suitable choice for a 4×100 application calling for a 15×8 gold wheel with +25mm offset. Confirm the hub-bore and clearance match your setup, and account for the specified 60-degree conical-seat tuner lug nuts.

Listed on Amazon as: Circuit Performance CP24 15×8 Gloss Gold 4×100 [+25mm]

#7

7. Circuit Performance CP21 Silver

• Wheel Size: 15 in
• Rim Size: 15 in
• Weight: 16.8 lb

Best for: Silver 4×100 street setup.

Why it ranks #7: This 15×8 silver wheel provides a 4×100 pattern, +25 offset, and 73.1mm hub bore, though no deep-lip dimension is listed.

The CP21 pairs a 15×8 barrel with a +25mm offset and a clean silver/machined finish, giving 4×100 buyers a defined fitment specification and understated wheel face. Its single-drilled four-lug center keeps the design simple, while the 73.1mm hub bore is a key measurement to consider when checking a vehicle setup.

The 15-inch diameter and 8-inch width give buyers clear dimensions for matching tire choices, while the +25mm offset is central to evaluating how the wheel sits relative to suspension and bodywork. A 4×100 pattern and 73.1mm hub bore narrow the fitment checks to those listed measurements. The silver/machined finish supplies a restrained appearance, and the simple single-drilled four-lug center avoids a busier multi-pattern face. Installation calls for 60-degree conical-seat tuner lug nuts.

Skip it if you need 4×114.3 compatibility or a zero-offset wheel; the Circuit Performance CP29 supports both listed patterns and has +0mm offset.

Choose this for a 4×100 vehicle setup where a silver/machined 15×8 wheel and +25mm offset match the fitment plan.

Listed on Amazon as: Circuit Performance CP21 15×8 Silver/Machined 4×100 [+25mm]

#8

8. Circuit Performance CP27 Black

• Weight: 17 lb

Best for: Compact 15×7 gloss-black build.

Why it ranks #8: The 15×7 wheel has 4×100 fitment and +35 offset, but its narrower width and listed 2.4-inch lip trail the 15×8 CP29s.

The CP27’s 15×7 format and +35mm offset give 4×100 buyers a narrower-width alternative to 15×8 wheels, with a full gloss-black finish. Its 2.4-inch gloss-black lip keeps the look coordinated, while the simple single-drilled four-lug center makes the wheel’s pattern visually straightforward.

A 15×7 width and +35mm offset provide two specific dimensions for assessing tire selection and vehicle clearance; buyers can compare them with their existing fitment before installation. The 4×100 pattern makes its intended bolt layout clear, and its single-drilled four-lug center keeps the face simple. The full gloss-black finish extends across the lip, creating a consistent appearance rather than a contrasting machined edge. Installation requires tuner-style lug nuts with 60-degree conical seating.

Skip it if you need a 15×8 wheel or 4×114.3 fitment; the Circuit Performance CP29 lists 15×8 and both 4×100/4×114.3 patterns.

Consider this CP27 for a 4×100 application where 15×7, +35mm offset, and a unified gloss-black look suit the plan. Its narrower width and required conical-seat tuner lug nuts are important boundaries to resolve before installation.

Listed on Amazon as: Circuit Performance CP27 15×7 Full Gloss Black 4-100 [+35mm] Wheels Rims compatible with Honda Civic, Acura Integra, Mazda Miata

#9

9. AODHÁN AH02 Silver

• Wheel Size: 17 in
• Rim Size: 17 in

Best for: 17-inch dual-pattern option.

Why it ranks #9: It lists 4×100 compatibility and a machined lip, but its 17×8 size and 35mm offset differ from the 15-inch deep-lip options.

A 17×8 size sets the AodHan AH02 apart from the 15-inch choices, giving buyers who need a larger wheel diameter a dual-pattern option. Its 4×100/4×114.3 bolt pattern, 35mm offset, and silver finish with machined lip provide specific fitment and appearance details to weigh together.

The 17×8 dimensions establish a larger-diameter, eight-inch-wide wheel, so buyers can assess tire and clearance plans around those measurements. Its dual 4×100/4×114.3 pattern accommodates either listed bolt layout, while the 35mm offset and 73.1mm hub bore offer further fitment criteria to check against the vehicle. The silver finish and machined lip give the wheel a defined two-tone appearance. The supplied facts do not list lug-seat requirements, so installation hardware needs separate verification.

Skip it if you need a 15-inch wheel; the Circuit Performance CP29 is 15×8 and also lists 4×100/4×114.3 compatibility.

A fitting candidate for shoppers whose setup calls for a 17×8 wheel, either listed four-lug pattern, and a 35mm offset. Treat its diameter and hub-bore figures as fitment constraints, and check installation hardware before ordering.

Listed on Amazon as: AodHan Dual Phase Forged AH02: 17×8 Wheel, 4×100/114.3 Bolt pattern, 73.1mm Hub Bore, 35mm Offset – Silver w/Machined Lip

#10

10. Bassett D-Hole Wheel

• Wheel Size: 14 in
• Rim Size: 14 in
• Weight: 19.1 lb

Best for: FWD mini-stock 14-inch use.

Why it ranks #10: This 14×7 steel wheel has a 4×100 pattern, but the listing gives no deep-dish lip measurement and describes a D-hole design.

Bassett’s D-Hole wheel is specifically described for FWD and mini-stock cars using a 14-inch tire, making its 14×7 format the key differentiator. The eight-hole D-Hole center and CNC spun-form rim shell connect that application to a lightweight-wheel design, while its listed 4×100 pattern serves a defined four-lug fitment.

The 14×7 size is intended for a 14-inch tire, so buyers in the stated FWD or mini-stock use case can begin with a wheel dimension aligned to that application. Bassett describes an eight D-Hole center combined with a CNC spun-form rim shell, linking its construction to the stated lightweight line. The listed 4×100 pattern further narrows fitment, and the alloy-steel material and 19.1-pound listed weight are useful practical considerations when comparing wheel assemblies.

Skip it if you need a 15-inch wheel for your setup; the Circuit Performance CP29 is 15×8 and offers 4×100 fitment.

This suits buyers assembling a FWD or mini-stock car around a 14-inch tire and 4×100 hub. Its 14×7 size is the boundary to keep in view, especially if your intended tire or vehicle setup calls for a larger wheel.

Listed on Amazon as: Bassett D-Hole Lightweight 14×7 in 4×100 mm Black Wheel Rim P/N 47SH4