A strong adjustable trailer ball mount should fit your receiver, level your trailer, and have a stated capacity that meets your towing requirements. This roundup suits truck, SUV, RV, and trailer owners comparing 2-inch receiver options, adjustable drop and rise, and single- or dual-ball designs. The products range from 7,500-pound mounts with a 9-1/2-inch drop to dual-ball models rated up to 12,500 pounds, while the B&W option is made for a 2.5-inch receiver.
That difference makes receiver measurement essential before choosing. Compare the mount’s stated gross trailer weight capacity with the limits of your vehicle and receiver, and check the ball size required by your coupler.
A higher product capacity does not raise the tow vehicle’s rating.
The Orion Motor Tech Adjustable Hitch is the best overall choice in this group for a typical 2-inch receiver setup. It includes a 2-inch ball, offers a 9-1/2-inch drop and 8-1/4-inch rise, and is rated for 8,000 pounds GTW. Its listed SAE J684 testing and included pins add useful specifics for comparison.
If you need a higher stated capacity or a dual-ball design, other picks offer those configurations, but match receiver size and towing limits before deciding.
Our Top Picks

Orion Motor Tech Adjustable Hitch
Fits a 2-inch receiver, includes a 2-inch ball, offers 9-1/2-inch drop and 8-1/4-inch rise, and is rated for 8,000 pounds GTW.
View on Amazon
Highest CapacityIts dual chrome-plated steel balls are listed for 8,000 and 12,500 pounds GTW, and the mount fits a 2-inch receiver.
View on Amazon
Best 6-Inch Dual BallFor a 2-inch receiver, it offers 6 inches of drop or rise and dual balls rated for 8,000 and 12,500 pounds GTW.
View on Amazon- Best Anti-Rattle Setup Kohree Adjustable Trailer Hitch
- Best Tri-Ball Option TYT Adjustable Tri-Ball Hitch
Compare Adjustable Trailer Ball Mounts
| # | Product | Maximum Towing Capacity | Material | Compatible with Vehicle Type | Buy |
|---|---|---|---|---|---|
| 1 | 1. Orion Motor Tech Adjustable HitchBest Overall | — | 40Cr | — | View on Amazon |
| 2 | 2. LWCH Adjustable Trailer HitchHighest Capacity | — | Aluminum | Truck | View on Amazon |
| 3 | 3. Onsski Adjustable Drop HitchBest 6-Inch Dual Ball | 5670 kg | Stainless Steel | Truck | View on Amazon |
| 4 | 4. Kohree Adjustable Trailer HitchBest Anti-Rattle Setup | — | Aluminum | Camper, RV, Trailer, Truck | View on Amazon |
| 5 | 5. CURT 45935 Dual-Ball HitchQuiet dual-ball towing | — | Alloy Steel | Trailer | View on Amazon |
| 6 | 6. TYT Adjustable Tri-Ball HitchBest Tri-Ball Option | 10000 lb | Alloy Steel | Trailer, Truck | View on Amazon |
| 7 | 7. METOWARE Adjustable HitchSix-hole height adjustment | 7500 lb | Alloy Steel | Truck, Car, RV, UTV, Trailer | View on Amazon |
| 8 | 8. OPENROAD Adjustable HitchMulti-ball fit flexibility | 7500 lb | Metal | Trailer | View on Amazon |
| 9 | 9. Nilight 8-Position HitchEight-position single-ball setup | 7500 lb | Alloy Steel | ATV, Car, Trailer | View on Amazon |
| 10 | 10. B&W Tow & Stow HitchHigh-capacity 2.5-inch receiver | — | Alloy Steel | Trailer | View on Amazon |
Detailed Reviews: Best Adjustable Trailer Ball Mount

#1 · Best Overall
1. Orion Motor Tech Adjustable Hitch
- Material: 40Cr
Best for: Ready-to-tow 2-inch ball.
Why it ranks #1: Fits a 2-inch receiver, includes a 2-inch ball, offers 9-1/2-inch drop and 8-1/4-inch rise, and is rated for 8,000 pounds GTW.
A supplied 2-inch ball removes the need to source that size separately, while the Orion Motor Tech mount pairs it with a 2-inch receiver, 9-1/2-inch drop, and 8-1/4-inch rise. Its 8,000-pound gross trailer weight rating and SAE J684 testing make the stated capacity and safety testing clear considerations for choosing it.
The included 2-inch ball and standard 2-inch receiver give this setup a specified ball and shank size, simplifying the component match for compatible towing equipment. Its 9-1/2-inch drop and 8-1/4-inch rise provide adjustment for trailer height, while the 8,000-pound gross trailer weight rating sets a clear load ceiling. The supplied pins and three keys support the included hitch hardware, and SAE J684 testing is a stated safety qualification.
- Includes a 2-inch ball for the mount
- Fits a standard 2-inch receiver
- Offers 9-1/2-inch drop and 8-1/4-inch rise
- Rated for 8,000 pounds GTW and SAE J684 tested
- Only a 2-inch ball size is specified for this mount.
Skip it if you need a second ball diameter for heavier towing; the LWCH TCB-6-2 lists 2- and 2-5/16-inch balls with separate capacities.
Choose this Orion mount if your trailer uses a 2-inch ball and the 8,000-pound rating covers your setup. Its specified 2-inch ball size is a boundary for owners who need a different diameter.
Full product details
| Brand | Orion Motor Tech |
|---|---|
| Color | black&blue |
| Included Components | 12x O-Rings, 1x Instructions, 1x Trailer Hitch, 3x Keys, 3x Pins |
| Item Dimensions | 12 x 10 x 3 inches |
| Item Weight | 8.76 kg |
| Dimensions | 12 x 10 x 3 inches |
| Manufacturer | Orion Motor Tech |
| Part Number | MPNTPAL751-AB |
| Manufacturer Warranty Description | Lifetime |
| Material | 40Cr |
| Model Number | MPNTPAL751-AB |
Listed on Amazon as: Orion Motor Tech Adjustable Trailer Hitch Ball Mount – 2" Receiver & Ball
View on Amazon
#2 · Highest Capacity
2. LWCH Adjustable Trailer Hitch
- Material: Aluminum
- Compatible with Vehicle Type: Truck
Best for: Heavy-load dual-ball towing.
Why it ranks #2: Its dual chrome-plated steel balls are listed for 8,000 and 12,500 pounds GTW, and the mount fits a 2-inch receiver.
A 2-5/16-inch ball rated for 12,500 pounds GTW makes this LWCH mount the higher-capacity choice between its two listed ball sizes. The 2-inch ball is rated for 8,000 pounds GTW, so owners can select a ball diameter and stated capacity suited to the trailer, on a 2-inch receiver.
The two chrome-plated steel balls offer distinct towing limits: 8,000 pounds GTW with the 2-inch ball and 12,500 pounds GTW with the 2-5/16-inch ball. That lets a buyer match the selected ball to the trailer connection and its load rather than carry separate ball attachments. Its 2-inch receiver fit is specified, and the included hitch mount, six keys, and two pin locks supply listed components for setup and securing the assembly.
- Dual balls measure 2 and 2-5/16 inches
- 2-inch ball rated for 8,000 pounds GTW
- 2-5/16-inch ball rated for 12,500 pounds GTW
- Includes two pin locks and six keys
- The supplied feature details do not state a drop or rise measurement.
Skip it if you need a stated height range before buying; the Onsski US-Trailer Hitch-Black lists a 6-inch drop and rise capacity.
This LWCH fits buyers who need a 2-inch receiver and want two ball diameters with different stated capacities. Height adjustment measurements are not supplied here, so trailer-leveling requirements need particular attention.
Full product details
| Brand | LWCH |
|---|---|
| Compatible with Vehicle Type | Truck |
| Included Components | Ball Hitch*1, Hitch Mount*1, Key*6, Pin lock*2 |
| Manufacturer | LWCH |
| Part Number | TCB-6-2 |
| Material | Aluminum |
| Model Number | TCB-6-2 |
Listed on Amazon as: Adjustable Trailer Hitch for 2 in Receiver, 6 in Drop/Rise, 12.5K GTW
View on Amazon
#3 · Best 6-Inch Dual Ball
3. Onsski Adjustable Drop Hitch
- Maximum Towing Capacity: 5670 kg
- Material: Stainless Steel
- Compatible with Vehicle Type: Truck
Best for: Dual-ball six-inch adjustment.
Why it ranks #3: For a 2-inch receiver, it offers 6 inches of drop or rise and dual balls rated for 8,000 and 12,500 pounds GTW.
A 6-inch drop or rise range combines with 2- and 2-5/16-inch balls, giving the Onsski mount height choice and two connection sizes in one assembly. The listed ball capacities are 8,000 and 12,500 pounds GTW respectively, and the supplied locks and silencer pads add practical setup hardware.
The 6-inch adjustment range gives owners room to position the trailer connection at different heights, while the dual balls cover 2-inch and 2-5/16-inch couplers with separate stated limits. Two locking hitch components are included for securing the mount, and four silencer pads are supplied for the hitch assembly. It is specified for a 2-inch receiver, so this shank size and the relevant ball-specific capacity should guide the fit and load decision.
- Adjusts through a 6-inch drop or rise range
- Includes 2-inch and 2-5/16-inch balls
- Ball capacities listed as 8,000 and 12,500 pounds GTW
- Includes two hitch locks and four silencer pads
- The listing gives conflicting material descriptions: aluminum in features and stainless steel in specifications.
Skip it if you need an anti-rattle stabilizer clamp explicitly listed; the Kohree KR1121-KO-US-FBA-2 includes one with its hitch.
Choose this Onsski for a 2-inch receiver when dual ball sizes, a 6-inch height range, locks, and silencer pads suit your setup. Review the conflicting material descriptions before deciding whether its construction matches your requirements.
Full product details
| Brand | Onsski |
|---|---|
| Compatible with Vehicle Type | Truck |
| Included Components | 1 Trailer Hitch,4 Silencer Pads,2 Locking Hitch |
| Item Weight | 16.8 pounds |
| Manufacturer | Onsski |
| Part Number | US-Trailer Hitch-ALL |
| Manufacturer Warranty Description | 2 year |
| Material | Stainless Steel |
| Maximum Towing Capacity | 5670 kg |
| Model Number | US-Trailer Hitch-Black |

#4 · Best Anti-Rattle Setup
4. Kohree Adjustable Trailer Hitch
- Material: Aluminum
- Compatible with Vehicle Type: Camper, RV, Trailer, Truck
Best for: Anti-rattle RV and trailer setup.
Why it ranks #4: Pairs a 6-inch adjustable range and dual-ball capacities up to 12,500 pounds GTW with an anti-rattle stabilizer and hitch silencers.
An included anti-rattle stabilizer clamp distinguishes the Kohree mount for owners who want receiver-side stabilization hardware with an adjustable dual-ball hitch. It fits a 2-inch receiver, adjusts through up to 6 inches of drop or rise, and pairs 2-inch and 2-5/16-inch balls with separate stated towing capacities.
The 6-inch drop or rise adjustment provides height options for leveling a trailer, while the dual balls let owners connect to 2-inch or 2-5/16-inch couplers. Their respective gross trailer weight capacities are listed as 8,000 and 12,500 pounds. The package includes an anti-rattle stabilizer, four hitch silencers, and two locking pins, giving buyers several specified components for stabilization and securing the hitch during setup.
- Adjusts up to 6 inches in drop or rise
- Includes 2-inch and 2-5/16-inch balls
- Ball ratings are 8,000 and 12,500 pounds GTW
- Includes anti-rattle stabilizer and four hitch silencers
- The maximum drop or rise is 6 inches, less than mounts with deeper listed ranges.
Skip it if you need a 9-1/2-inch drop; the Nilight 92136B lists that depth along with an 8-1/4-inch rise.
This Kohree suits RV, camper, truck, and trailer owners who value dual balls and included anti-rattle hardware. Its maximum 6-inch adjustment is the relevant boundary when checking the height needed for level towing.
Full product details
| Brand | Kohree |
|---|---|
| Compatible with Vehicle Type | Camper, RV, Trailer, Truck |
| Included Components | 1 x New Anti-Rattle Stabilizer, 1 x Trailer Hitch, 2 x Upgrade Hitch Pin Locks, 4 x Hitch Silencers, 4 x Keys |
| Manufacturer | Kohree |
| Part Number | KR1121-KO-US-FBA-2 |
| Material | Aluminum |
| Model Number | KR1121-KO-US-FBA-2 |
Listed on Amazon as: Kohree 6" Adjustable Trailer Hitch Fit 2" Receiver, Anti Rattle Hitch Clamp
View on Amazon
#5
5. CURT 45935 Dual-Ball Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: Quiet dual-ball towing.
Why it ranks #5: The 2-inch shank mount has a 15,000-pound stated capacity, 5-1/2-inch drop, 4-1/2-inch rise, and anti-rattle technology.
Anti-rattle technology is the CURT mount’s defining practical feature, intended to prevent loud receiver-coupling noise for a quieter ride. Its adjustable shank provides a 5-1/2-inch drop and 4-1/2-inch rise, while the dual-ball attachment and 15,000-pound rating serve varied towing setups on a 2-inch shank.
The 5-1/2-inch drop and 4-1/2-inch rise give this mount height adjustment for trailer leveling, and its dual-ball attachment avoids carrying separate ball attachments for the two included sizes. Anti-rattle technology addresses noise at the receiver coupling, which can make the towing ride quieter for passengers. Alloy-steel construction and a 15,000-pound capacity are listed; match the shank and towing limits to the vehicle and trailer.
- Provides 5-1/2-inch drop and 4-1/2-inch rise
- Dual-ball attachment combines two ball sizes
- Anti-rattle technology targets receiver-coupling noise
- Listed capacity is 15,000 pounds
- The supplied details do not specify the two ball diameters.
Skip it if you need the ball diameters stated before selecting; the B&W TS20037B specifies 2-inch and 2-5/16-inch balls.
Choose the CURT for a 2-inch shank setup where dual-ball convenience, moderate height adjustment, and reduced receiver noise matter. Its supplied details do not name the ball diameters, so confirm that requirement from the product information.
Full product details
| Brand | CURT |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Adjustable Hitch |
| Manufacturer | CURT |
| Part Number | 45935 |
| Manufacturer Warranty Description | Limited Lifetime Warranty (One-Year Finish, One-Year Parts) |
| Material | Alloy Steel |
| Model Number | 45935 |
| Additional Information | Important information |
Listed on Amazon as: CURT 45935 Adjustable Dual-Ball Hitch Mount, 2" Shank, 15,000 lb
View on Amazon
#6 · Best Tri-Ball Option
6. TYT Adjustable Tri-Ball Hitch
- Maximum Towing Capacity: 10000 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer, Truck
Best for: Higher-capacity tri-ball option.
Why it ranks #6: Its tri-ball format offers multiple ball sizes, and the listed maximum towing capacity is 10,000 pounds for a 2-inch receiver.
The TYT tri-ball configuration gives this mount a multi-ball format for owners who need more than a single ball position. Its listed maximum towing capacity is 10,000 pounds, and alloy-steel construction supplies the stated material choice. The product is specified for a 2-inch receiver, making receiver size an essential part of the fit decision.
A tri-ball head can serve towing setups that call for different ball positions, although the supplied listing does not specify the individual ball diameters. The 10,000-pound maximum towing capacity gives buyers a stated upper limit to compare with their trailer and vehicle ratings. Alloy steel is the listed construction material, and the 24-pound item weight is relevant when lifting or positioning the mount during installation. Confirm the required ball size from the actual product details before relying on it.
- Tri-ball format provides multiple ball positions
- Maximum towing capacity listed as 10,000 pounds
- Made from alloy steel
- Specified for trailer and truck compatibility
- The supplied specifications do not identify the tri-ball diameters or adjustment range.
Skip it if you need stated drop and rise measurements before choosing; the METOWARE 79900 lists a 9-1/2-inch drop and 8-1/4-inch rise.
This TYT is for buyers seeking a tri-ball format and a listed 10,000-pound maximum capacity. Its supplied details do not give ball diameters or height adjustment, so those particulars matter before matching it to a trailer.
Full product details
| Brand | TYT |
|---|---|
| Compatible with Vehicle Type | Trailer, Truck |
| Included Components | hitch |
| Item Weight | 24 pounds |
| Manufacturer | TYT |
| Part Number | PP3PL30027 |
| Manufacturer Warranty Description | 1 year |
| Material | Alloy Steel |
| Maximum Towing Capacity | 10000 pounds |
| Model Number | PP3PL30027 |
Listed on Amazon as: TYT Adjustable Tri-Ball Hitch Ball Mount for 2-Inch Receiver
View on Amazon
#7
7. METOWARE Adjustable Hitch
- Maximum Towing Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: Truck, Car, RV, UTV, Trailer
Best for: Six-hole height adjustment.
Why it ranks #7: This 2-inch receiver mount is rated for 7,500 pounds GTW and has six pin holes, with a 9-1/2-inch drop and 8-1/4-inch rise.
Six pin holes and an upside-down installation option give the METOWARE mount multiple ways to set its height, reaching a 9-1/2-inch drop or 8-1/4-inch rise. That range supports varied trailer-height setups on a 2-inch receiver, while its alloy-steel construction carries a listed 7,500-pound gross trailer weight capacity.
The six pin holes and reversible orientation create more positioning choices than a single fixed-height mount, helping owners set a suitable connection height within the stated 9-1/2-inch drop and 8-1/4-inch rise. Alloy steel and a 7,500-pound gross trailer weight rating define its listed construction and load limit. The included three hitch pins and clips provide the hardware for securing the mount in the selected position during setup.
- Six pin holes provide height-position choices
- Can be turned upside down for adjustment
- Offers 9-1/2-inch drop and 8-1/4-inch rise
- Includes three hitch pins and clips
- Its 7,500-pound gross trailer weight rating is below heavier-duty options.
Skip it if you tow above 7,500 pounds GTW; the B&W TS20037B lists an 18,000-pound GTW rating for a 2.5-inch receiver.
Consider this METOWARE for a 2-inch receiver when six pin-hole positions and a reversible mount help with trailer leveling. Its stated 7,500-pound gross trailer weight limit remains the key boundary for load selection.
Full product details
| Brand | METOWARE |
|---|---|
| Compatible with Vehicle Type | Truck, Car, RV, UTV, Trailer |
| Included Components | 1 x Adjustable Ball Mount, 3 x Hitch Pins & Clips |
| Manufacturer | METOWARE |
| Part Number | 79900 |
| Material | Alloy Steel |
| Maximum Towing Capacity | 7500 pounds |
| Model Number | 79900 |
Listed on Amazon as: METOWARE 2" Adjustable Trailer Hitch Ball Mount 9-1/2" Drop and 8-1/4" Rise
View on Amazon
#8
8. OPENROAD Adjustable Hitch
- Maximum Towing Capacity: 7500 lb
- Material: Metal
- Compatible with Vehicle Type: Trailer
Best for: Multi-ball fit flexibility.
Why it ranks #8: Fits a 2-inch receiver, supports ball sizes from 1-7/8 to 2-5/16 inches, and provides a 9-1/2-inch drop and 8-1/4-inch rise.
A 1-inch ball hole accommodates 1-7/8-, 2-, and 2-5/16-inch trailer balls, letting this OPENROAD mount serve different ball sizes without changing the mount. Its 9-1/2-inch drop and 8-1/4-inch rise also provide height adjustment for a 2-inch receiver, with a 7,500-pound gross trailer weight rating.
The three listed ball-hole sizes give owners flexibility when their trailers use different ball diameters, while the 9-1/2-inch drop and 8-1/4-inch rise let the mount be positioned for varied trailer heights. Its 2-inch receiver compatibility identifies the shank size needed for the vehicle side of the connection. The steel construction and 7,500-pound gross trailer weight rating provide the stated strength limit to consider when matching the mount to a towing setup.
- Ball hole accommodates 1-7/8-, 2-, and 2-5/16-inch balls
- Provides 9-1/2-inch drop and 8-1/4-inch rise
- Rated for 7,500 pounds gross trailer weight
- Steel construction; pins are included
- The 7,500-pound gross trailer weight rating limits it for heavier loads.
Skip it if you need a mount rated above 7,500 pounds; the TYT PP3PL30027 lists a 10,000-pound maximum towing capacity.
This suits a 2-inch-receiver owner who values changing among three ball diameters and needs substantial height adjustment. Keep its 7,500-pound gross trailer weight rating in view when matching it to the trailer and towing vehicle.
Full product details
| Brand | OPENROAD |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | hitch, pins |
| Manufacturer | OPENROAD |
| Part Number | PP2PL30004 |
| Material | Metal |
| Maximum Towing Capacity | 7500 pounds |
| Model Number | PP2PL30004 |
Listed on Amazon as: OPENROAD Adjustable Trailer Hitch Ball Mount for 2-Inch Receiver
View on Amazon
#9
9. Nilight 8-Position Hitch
- Maximum Towing Capacity: 7500 lb
- Material: Alloy Steel
- Compatible with Vehicle Type: ATV, Car, Trailer
Best for: Eight-position single-ball setup.
Why it ranks #9: Its 2-inch ball and 7,500-pound GTW rating suit lighter setups; the 8-position mount offers 9-1/2-inch drop and 8-1/4-inch rise.
Eight adjustment positions give the Nilight mount a range of setup choices, including a 9-1/2-inch drop and 8-1/4-inch rise. It comes with a 2-inch ball for a 2-inch receiver and is rated for 7,500 pounds GTW, making its specified ball size and load limit central to choosing it.
The eight-position adjustment and stated drop and rise give owners options for aligning a trailer at different heights. A supplied 2-inch ball pairs with the specified 2-inch receiver, while the 7,500-pound GTW and 750-pound tongue-weight ratings identify the listed limits to check against the towing setup. The alloy-steel mount has an E-coat pre-coating and textured black powder-coat finish; the listing also says to tighten the ball and check for looseness before each use.
- Eight adjustment positions
- Provides 9-1/2-inch drop and 8-1/4-inch rise
- Includes a 2-inch ball and premium pin lock
- Lists 7,500-pound GTW and 750-pound tongue weight
- It comes with a single 2-inch ball rather than dual ball sizes.
Skip it if you need two ball diameters on one mount; the CURT 45935 is listed as an adjustable dual-ball hitch mount.
Pick the Nilight if a single 2-inch ball, eight height positions, and its stated weight limits suit your 2-inch receiver setup. Its 7,500-pound GTW rating and single ball size define important selection boundaries.
Full product details
| Brand | Nilight |
|---|---|
| Compatible with Vehicle Type | ATV, Car, Trailer |
| Included Components | 1PCS 8-Position Adjustable Trailer Hitch Ball Mount, 2PCS 5/8" Hitch Pin Clip, 1PCS Premium Pin Lock, 1PCS 2 Inch Trailer Hitch Ball |
| Item Weight | 8.74 kg |
| Manufacturer | Nilight |
| Part Number | 92136B |
| Manufacturer Warranty Description | 2 Years Warranty |
| Material | Alloy Steel |
| Maximum Towing Capacity | 7500 pounds |
| Model Number | 92136B |
Listed on Amazon as: Nilight 8-Position Adjustable Trailer Hitch Ball Mount with 2 inch Ball Fits 2 Inch Receiver with 5/8" Pin Lock 7500 lbs, 9-1/2" Drop, 8-1/4" Rise Hitch for Trailers Boats Pickups RV
View on Amazon
#10
10. B&W Tow & Stow Hitch
- Material: Alloy Steel
- Compatible with Vehicle Type: Trailer
Best for: High-capacity 2.5-inch receiver.
Why it ranks #10: It offers dual balls and an 18,000-pound GTW figure, but its 2.5-inch receiver fit does not match the more common 2-inch options here.
An 18,000-pound GTW rating sets this B&W Tow & Stow apart for heavier listed towing, with dual 2-inch and 2-5/16-inch balls for different couplers. Its 5-inch drop and 2.5-inch receiver specify the key height range and shank fit, distinguishing it from mounts intended for 2-inch receivers.
The 2.5-inch receiver fit is a critical vehicle-side requirement, while the dual ball sizes allow a match to either a 2-inch or 2-5/16-inch trailer coupler. Its 5-inch drop provides the stated height adjustment, and the 18,000-pound gross trailer weight rating sets the listed capacity ceiling. Adjustable pins and a retainer are included alongside the hitch balls, supporting repositioning and securing the assembly; the vehicle and hitch limits still apply.
- Rated for 18,000 pounds GTW
- Dual 2-inch and 2-5/16-inch hitch balls
- Fits a 2.5-inch receiver
- Includes adjustable pins and retainer
- The 2.5-inch receiver size excludes vehicles equipped only with a 2-inch receiver.
Skip it if you have a 2-inch receiver; the CURT 45935 has a 2-inch shank and lists a 15,000-pound capacity.
This B&W suits owners with a 2.5-inch receiver who need dual ball sizes and the listed 18,000-pound GTW capacity. Its 5-inch drop and receiver size are essential boundaries when matching vehicle and trailer.
Full product details
| Brand | B&W |
|---|---|
| Compatible with Vehicle Type | Trailer |
| Included Components | Adjustable Pins & Retainer, Hitch Balls, Instruction |
| Item Weight | 25 pounds |
| Manufacturer | B&W Trailer Hitches |
| Part Number | TS20037B |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| Material | Alloy Steel |
| Model Number | Model 5 |
| Additional Information | Important information Safety Information Do Not Exceed Tow Vehicle or Hitch Towing Capacity |
Listed on Amazon as: B&W Trailer Hitches Tow & Stow Adjustable Trailer Hitch Ball Mount – Fits 2.5" Receiver, Dual Ball (2" x 2-5/16"), 5" Drop, 18,000 GTW – TS20037B
View on AmazonAvoid receiver-size and ball-size mismatches
Receiver and coupler measurements are the first compatibility checks to make before buying an adjustable mount. Most products here are described for a 2-inch receiver, including the Orion Motor Tech Adjustable Hitch, while the B&W Tow & Stow Hitch is specified for a 2.5-inch receiver. Those sizes are not interchangeable without a compatible, properly rated solution.
Ball size is a separate check: the OPENROAD Adjustable Hitch accommodates 1-7/8-, 2-, and 2-5/16-inch balls, while the Orion Motor Tech Adjustable Hitch includes a 2-inch ball. Dual-ball mounts can reduce the need to change mounts when a trailer uses one of two ball sizes, but they do not guarantee compatibility with every coupler.
Confirm your receiver opening, coupler ball size, and the tow vehicle and receiver limits before use; the component with the lowest applicable rating governs the setup.
Check adjustment and hardware before towing
A mount can have ample capacity yet still be unsuitable if its adjustment does not level your trailer or its hardware is not secured. The products span different adjustment ranges: the Onsski Adjustable Drop Hitch and Kohree Adjustable Trailer Hitch provide 6 inches of drop or rise, while the Orion Motor Tech Adjustable Hitch offers a 9-1/2-inch drop and 8-1/4-inch rise. Measure the height difference between the vehicle’s receiver and the trailer coupler with the vehicles on level ground, then check that the mount can accommodate it in the correct orientation.
Also inspect what the package includes: the Kohree Adjustable Trailer Hitch lists hitch-pin locks and silencers, while the OPENROAD Adjustable Hitch lists pins. Nilight specifically instructs users to tighten the ball before installation and check for looseness before each use.
Follow the product instructions and recheck connections before towing.
How to Choose an Adjustable Trailer Ball Mount
Receiver and ball fit
Look first for a receiver size and ball size that match your vehicle and trailer. Nine listings describe 2-inch receiver fit, while the B&W Tow & Stow Hitch is for a 2.5-inch receiver, so verify the opening rather than relying on appearance. Ball options vary too: Orion Motor Tech Adjustable Hitch includes a 2-inch ball; OPENROAD Adjustable Hitch accepts 1-7/8-, 2-, and 2-5/16-inch balls; and dual-ball options include different pairings.
A single-ball mount suits a trailer with one known coupler size. A dual- or tri-ball design is more useful if you tow trailers with different couplers, provided each ball is compatible and adequately rated.
Adjustment range
Choose a drop and rise range that can position your trailer level when hitched. Several models, including Orion Motor Tech Adjustable Hitch and METOWARE Adjustable Hitch, list a 9-1/2-inch drop and 8-1/4-inch rise. Onsski Adjustable Drop Hitch and Kohree Adjustable Trailer Hitch list up to 6 inches of drop or rise, while CURT 45935 Dual-Ball Hitch lists a 5-1/2-inch drop and 4-1/2-inch rise.
Measure the height difference on level ground before choosing. The larger listed range may suit vehicles and trailers with a greater height difference; a smaller range may be sufficient when your measured adjustment falls within it.
Capacity and material
Choose a mount whose stated capacity meets your towing setup, while also respecting the vehicle and receiver limits. Listed figures range from 7,500 pounds GTW for OPENROAD Adjustable Hitch, METOWARE Adjustable Hitch, and Nilight 8-Position Hitch to 12,500 pounds for the larger ball on LWCH Adjustable Trailer Hitch and Onsski Adjustable Drop Hitch. CURT 45935 Dual-Ball Hitch lists 15,000 pounds, and B&W Tow & Stow Hitch lists 18,000 pounds but uses a 2.5-inch receiver.
Materials vary: listings include alloy steel, steel, aluminum, and 40Cr. Favor the capacity and receiver fit your actual combination requires; do not treat the mount’s maximum as permission to exceed another component’s limit.
Which Adjustable Trailer Ball Mount Should You Choose?
For most buyers with a 2-inch receiver seeking broad adjustment and a supplied ball, choose the Orion Motor Tech Adjustable Hitch: its 8,000-pound GTW rating and 9-1/2-inch drop make it a balanced fit. If your trailer requires a higher GTW rating and either of two ball sizes, consider the LWCH Adjustable Trailer Hitch, rated up to 12,500 pounds for its larger ball. For a 6-inch adjustment range with dual-ball flexibility, compare Onsski Adjustable Drop Hitch and Kohree Adjustable Trailer Hitch; Kohree also lists an anti-rattle stabilizer.
The CURT 45935 Dual-Ball Hitch suits buyers prioritizing its listed 15,000-pound capacity and anti-rattle technology. If your vehicle has a 2.5-inch receiver, B&W Tow & Stow Hitch is the specifically matched option here.
Verify all component limits and fit before towing.
Related Buying Guides
Frequently Asked Questions
How do I measure the rise or drop needed to tow a trailer level?
Measure on level ground with the vehicle and trailer positioned as they will be when hitched. Compare the height of the vehicle’s receiver opening with the trailer coupler height, then use the difference to determine the needed rise or drop. Check the mount’s adjustment range and confirm the trailer sits level when connected.
Should I choose a fixed ball size or a dual-ball mount for my trailer?
Choose a ball size that matches the trailer coupler. A single-ball mount suits a setup that uses one ball size, while a dual-ball mount offers two ball sizes for different couplers. Confirm the selected ball size and the mount’s stated towing limits before use; the extra option does not increase those limits.
What should I check to ensure a hitch ball mount fits my receiver and towing setup?
Check that the mount’s shank matches your receiver size, then verify the ball size, rise or drop range, and stated capacity against your trailer and vehicle requirements. Also check the limits of every towing component, including the receiver and ball, and confirm that any included pins or locks suit the setup.
How should I compare the stated towing capacity of different mounts?
Compare the mount’s stated gross trailer weight rating with the trailer’s required towing capacity, and do not assume the highest listed number is the limit for your whole setup. The vehicle, receiver, ball, and other components may have lower limits. Follow the lowest applicable rating and verify the exact configuration.
When is an anti-rattle feature worth considering?
Consider an anti-rattle feature if you want a mount that lists a stabilizer or anti-rattle technology as part of its configuration. The Kohree lists an anti-rattle stabilizer, and the CURT 45935 lists anti-rattle technology. Check the product details to understand what is included and ensure the mount otherwise fits your setup.
Final Words
For a typical 2-inch receiver setup, the Orion Motor Tech is the balanced pick, with a supplied 2-inch ball, broad adjustment, and an 8,000-pound GTW rating. Choose another option when its stated configuration better matches your needs: a higher rating, dual-ball flexibility, anti-rattle features, or a 2.5-inch receiver. Before towing, verify receiver fit, ball size, adjustment, and the limits of every component.

