A strong 48-inch trailer axle matches your trailer’s spring-center measurement, hub-face width, and load needs, making it suitable for owners replacing an axle or building a light-duty trailer. This roundup includes nine options, mainly 60-inch hub-face axles with 48-inch spring centers, in 2,000- and 3,500-pound capacities. The leading pick, Flynsu 3,500 lb 60HF 48SC, pairs the common 60/48 dimensions with five leaf springs and 5-on-4.5 hubs.
Lighter builds may be better served by a 2,000-pound axle, while a 62-inch hub-face model suits only trailers that call for that wider measurement. Before choosing, verify how your trailer’s spring centers and hub faces are measured, and check hub bolt pattern and wheel clearance.
The product listings do not establish fit for every trailer configuration.
The Flynsu 3,500 lb 60HF 48SC is the best overall choice in this group for a trailer that needs a 48-inch spring center and 60-inch hub face. It is rated for 3,500 pounds, includes five leaf springs, and has 5-lug hubs with a 5×4.5 bolt pattern. Choose a 2,000-pound option instead when that capacity better matches your trailer; confirm axle dimensions and wheel compatibility before ordering.
Our Top Picks

Its 60-inch hub face and 48-inch spring center match the common dimensions here, with 3,500-pound capacity, five leaf springs, and 5×4.5 hubs.
View on Amazon
Five-Spring OptionThis 60-inch hub-face, 48-inch spring-center axle is rated for 3,500 pounds and lists five 251⁄4-inch leaf springs.
View on Amazon
Four-Spring OptionLCI Lippert 3,500 lb 60HF 48SC
It matches 60-inch hub face and 48-inch spring center, with 3,500-pound capacity and four 251⁄4-inch leaf springs.
View on Amazon- Light-Duty Pick Flynsu 2,000 lb 60HF 48SC
- Wider Hub Face Flynsu 3,500 lb 62HF 48SC
Compare these 48-inch spring-center axle options
| # | Product | Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. Flynsu 3,500 lb 60HF 48SCBest Overall | 65.91 x 9.06 x 7.09 in | 74.8 lb | View on Amazon |
| 2 | 2. Getanye 3,500 lb 60HF 48SCFive-Spring Option | — | 74.8 lb | View on Amazon |
| 3 | 3. LCI Lippert 3,500 lb 60HF 48SCFour-Spring Option | — | — | View on Amazon |
| 4 | 4. Flynsu 2,000 lb 60HF 48SCLight-Duty Pick | 66.93 x 7.09 x 7.09 in | 36.9 lb | View on Amazon |
| 5 | 5. Getanye 2,000 lb 60HF 48SCLight-duty boat and camper builds | — | 35.9 lb | View on Amazon |
| 6 | 6. Flynsu 3,500 lb 62HF 48SCWider Hub Face | 68.11 x 9.06 x 7.09 in | 77 lb | View on Amazon |
| 7 | 7. LCI Lippert 3,500 lb 62HF 48SC62-inch hub-face trailer replacements | — | — | View on Amazon |
| 8 | 8. aYEHKGaaa 2,000 lb 60-Inch AxleBasic 48-inch-wide trailer replacement | 1.97 x 1.18 x 0.79 in | 3.88 oz | View on Amazon |
| 9 | 9. AAeAxtdfw 2,000 lb 60-Inch AxleLight-duty 4×6 and 4×8 trailers | 1.97 x 1.18 x 0.79 in | 3.88 oz | View on Amazon |
Detailed Reviews: Best 48 Inch Trailer Axle

#1 · Best Overall
1. Flynsu 3,500 lb 60HF 48SC
- Dimensions: 65.91 x 9.06 x 7.09 in
- Weight: 74.8 lb
Best for: Lower-ride-height light-duty builds.
Why it ranks #1: Its 60-inch hub face and 48-inch spring center match the common dimensions here, with 3,500-pound capacity, five leaf springs, and 5×4.5 hubs.
A spring seat welded to the bottom of the axle is the defining feature of this Flynsu assembly, and the listing says it lowers ride height. That detail, alongside a 3,500-pound capacity and 60-inch hub face, helps buyers assess it for a matching light-duty trailer layout.
The 60-inch hub face and 48-inch spring centers provide concrete dimensions for checking a replacement against the trailer frame. Its 3,500-pound capacity and five-leaf-spring setup serve the listed light-duty utility, boat, car-hauler, ATV, and other trailer applications. The welded bottom spring seat is specified to lower ride height, a useful consideration when planning trailer stance. Five-lug hubs use a 5×4.5 bolt pattern, so wheel compatibility depends on that pattern matching the existing setup.
- 3,500-pound axle capacity
- 60-inch hub face and 48-inch spring centers
- Five leaf springs
- Welded bottom spring seat lowers ride height
- The spring seat lowers ride height, which may not suit a build requiring a higher stance.
Skip it if you need a 62-inch hub face; the Flynsu 3,500 lbs Trailer Axle, 62-inch Hubface 48-inch Spring Center provides that span.
Consider this Flynsu axle for a 3,500-pound light-duty trailer where the 60-inch hub face, 48-inch spring centers, and lower ride height suit the layout. Its five-lug 5×4.5 pattern is a key wheel-fit boundary.
Full product details
| Brand | Flynsu |
|---|---|
| Item Weight | 74.8 pounds |
| Item model number | 60HF 48SC |
| Manufacturer | Flynsu |
| Part Number | Flynsu 60HF 48SC |
| Model | Straight Idler Trailer Axle |
| Dimensions | 65.91 x 9.06 x 7.09 inches |
Listed on Amazon as: 3,500 lbs Trailer Axle, 60" Hubface 48" Spring Center, w/ 5 Leaf Springs
View on Amazon
#2 · Five-Spring Option
2. Getanye 3,500 lb 60HF 48SC
- Weight: 74.8 lb
Best for: Five-spring 3,500-pound replacements.
Why it ranks #2: This 60-inch hub-face, 48-inch spring-center axle is rated for 3,500 pounds and lists five 251⁄4-inch leaf springs.
Five 251⁄4-inch-long, 13⁄4-inch-wide leaf springs give this Getanye axle a defined spring setup for 3,500-pound light-duty trailer replacements. Its 60-inch hub face and 48-inch spring centers identify the mounting layout, while the five-lug, 41⁄2-inch bolt pattern supplies a specific wheel-connection reference.
The axle combines 60 inches between hub faces with 48-inch spring centers, dimensions that help compare it with a trailer's existing mounting layout. Five leaf springs, each listed as 251⁄4 inches long and 13⁄4 inches wide, provide the specified suspension package for its 3,500-pound capacity. The five-lug hubs use a 41⁄2-inch bolt pattern and 1⁄2-inch lug studs, while the 23⁄8-inch main tube is another useful specification for replacement planning. The listed applications include utility, boat, and car-hauler trailers.
- 3,500-pound capacity
- 60-inch hub face and 48-inch spring centers
- Five 251⁄4-by-13⁄4-inch leaf springs
- Five-lug hubs with 41⁄2-inch bolt pattern and 1⁄2-inch studs
- The 60-inch hub face will not match a trailer that requires a 62-inch span.
Skip it if you need a 62-inch hub face; the Flynsu 3,500 lbs Trailer Axle, 62-inch Hubface 48-inch Spring Center is listed with that dimension.
This Getanye axle suits a light-duty trailer replacement needing 3,500-pound capacity, five leaf springs, and the specified 60-inch by 48-inch layout. Check the bolt pattern, lug-stud size, and main-tube specification against the trailer before installation.
Full product details
| Brand | Getanye |
|---|---|
| Item Weight | 74.8 pounds |
| Item model number | Trailer Axle |
| Manufacturer | Getanye |
| Part Number | Getanye Straight Idler Trailer Axle |
| Model | Trailer Axle |
| Package Dimensions | 65.91 x 9.06 x 7.09 inches |
Listed on Amazon as: 3,500lbs Straight Idler Trailer Axle 60HF 48SC, 5 on 4.5 Bolt Pattern
View on Amazon
#3 · Four-Spring Option
3. LCI Lippert 3,500 lb 60HF 48SC
Best for: Spring-equipped 3,500-pound trailers.
Why it ranks #3: It matches 60-inch hub face and 48-inch spring center, with 3,500-pound capacity and four 251⁄4-inch leaf springs.
Four 251⁄4-inch-long, 13⁄4-inch-wide leaf springs distinguish this LCI Lippert axle, pairing its 3,500-pound rating with spring dimensions that matter when planning a replacement. The 60-inch hub-face and 48-inch spring-center measurements offer concrete layout references for a trailer with matching mounting geometry.
The 48-inch spring-center measurement and 60-inch hub-face span give buyers two essential dimensions for comparing the axle with an existing trailer layout. Its four leaf springs measure 251⁄4 inches long and 13⁄4 inches wide, supplying the listed spring setup alongside the 3,500-pound capacity. A positive camber bow is specified to help tire alignment under load, while the product is described for use across varied terrain. Confirm the listed dimensions against the trailer before choosing this assembly.
- 3,500-pound axle rating
- 60-inch hub face and 48-inch spring centers
- Includes four 251⁄4-inch-long leaf springs
- Positive camber bow supports tire alignment under load
- The hub-face span is 60 inches, so it is not the 62-inch option.
Skip it if you need a 62-inch hub face; the LCI Lippert 3,500LB Straight Idler Trailer Axle 62HF 48SC has that measurement.
This suits a trailer owner replacing a 3,500-pound axle with 60-inch hub face and 48-inch spring centers who wants the listed four-spring setup. Its dimensions, including spring length and width, remain important boundaries when matching an existing installation.
Full product details
| Brand | LCI Lippert |
|---|
Listed on Amazon as: 3,500LB Straight Idler Trailer Axle 60HF 48SC
View on Amazon
#4 · Light-Duty Pick
4. Flynsu 2,000 lb 60HF 48SC
- Dimensions: 66.93 x 7.09 x 7.09 in
- Weight: 36.9 lb
Best for: Compact 2,000-pound trailer builds.
Why it ranks #4: Its 60/48-inch dimensions and 2,000-pound rating suit lighter builds, including 4×6 or 4×8 trailers; the hub pilot is 2.45 inches.
A welded bottom spring seat specified to lower ride height distinguishes this Flynsu 2,000-pound axle. The 60-inch hub face and 48-inch spring centers suit the listed compact trailer layouts, while five-lug hubs and a 2.45-inch center pilot give wheel selection a measurable reference.
For common 4×6 and 4×8 builds, the 60-inch hub-face span and 48-inch spring centers provide the main layout checks. The 2,000-pound capacity places the axle in the lighter-duty class, and its five-lug hubs use a 2.45-inch center pilot; the wheel center hole must be larger than 21⁄2 inches. A high-strength straight steel tube is listed, and the welded spring seat lowers ride height, an important stance consideration during a build or replacement.
- 2,000-pound axle capacity
- 60-inch hub face and 48-inch spring centers
- Five-lug hubs with 2.45-inch center pilot
- Welded bottom spring seat lowers ride height
- The 2,000-pound capacity does not cover applications requiring a higher-rated axle.
Skip it if you need a 3,500-pound rating; the Flynsu 3,500 lbs Trailer Axle, 60-inch Hubface 48-inch Spring Center offers that capacity.
This Flynsu axle fits buyers planning a 4×6, 4×8, or other 48-inch-wide trailer within the 2,000-pound rating. Its lower spring-seat position and wheel-center-hole requirement are important boundaries for the intended installation.
Full product details
| Brand | Flynsu |
|---|---|
| Item Weight | 36.9 pounds |
| Item model number | Trailer Axel |
| Manufacturer | Flynsu |
| Part Number | Flynsu Boat Trailer Axle |
| Model | Trailer Axel |
| Dimensions | 66.93 x 7.09 x 7.09 inches |
Listed on Amazon as: 2,000 lbs Trailer Axle, 60" Hubface 48" Spring Center, 5-Lug Hubs
View on AmazonWhy it ranks #5: The 60-inch hub face and 48-inch spring center suit the target fit, with a 2,000-pound rating and pre-greased 5-lug hubs.
A 2,000-pound rating paired with 60-inch hub-face and 48-inch spring-center measurements gives this Getanye axle a clear role in compact trailer builds. Its five-lug hubs and stated 4×6 and 4×8 applications help narrow the choice for small boat trailers, campers, and similar light-duty projects.
The 60-inch hub-face span and 48-inch spring-center dimension suit the compact 4×6 and 4×8 trailer applications listed, helping identify a match by the two key mounting measurements. Its 2,000-pound capacity defines the load class, while five-lug hubs support wheel attachment; the 2.45-inch center pilot means the wheel's center hole must exceed 2-1/2 inches. The ready-to-use, pre-greased hubs avoid an extra greasing step at installation, and the powder coating is specified for protection against the elements.
- 2,000-pound axle capacity
- 60-inch hub face and 48-inch spring center
- Five-lug hubs with 2.45-inch center pilot
- Pre-greased hubs and protective powder coating
- The 2,000-pound rating limits it to lighter-duty trailer applications.
Skip it if you need a 3,500-pound axle for heavier loads; the LCI Lippert 3,500LB Straight Idler Trailer Axle is rated for that capacity.
Choose this axle for a compact 4×6 or 4×8 trailer, camper build, or smaller boat trailer that falls within its 2,000-pound rating. Check the 60-inch hub face, 48-inch spring centers, and wheel-center-hole requirement before installation.
Full product details
| Brand | Getanye |
|---|---|
| Item Weight | 35.9 pounds |
| Item model number | Trailer Axle |
| Manufacturer | Getanye |
| Part Number | Getanye 60" Hub Face 5 Lug Hubs |
| Model | Trailer Axle |
| Package Dimensions | 66 x 7 x 6.5 inches |
Listed on Amazon as: 2000 lb Trailer Axle, 60" Hub Face, 48" Spring Center, 5-Lug Hubs for 4×6 or 4×8 Trailers, 60" HF 48" SC, 2K Small Boat Camper Trailer Axle
View on Amazon
#6 · Wider Hub Face
6. Flynsu 3,500 lb 62HF 48SC
- Dimensions: 68.11 x 9.06 x 7.09 in
- Weight: 77 lb
Best for: 62-inch fit with lower ride height.
Why it ranks #6: It keeps the 48-inch spring center and offers 3,500-pound capacity with five leaf springs, but its 62-inch hub face differs from the common 60-inch fit.
A 62-inch hub face combined with a welded spring seat that lowers ride height gives this Flynsu axle two defining fit considerations. Its 3,500-pound rating and 48-inch spring centers suit buyers comparing a light-duty replacement against a wider hub span and a specific trailer stance.
The 62-inch hub face and 48-inch spring centers provide the key measurements for checking the trailer layout, especially when a 60-inch span is too narrow. A 3,500-pound capacity and five leaf springs serve the listed light-duty trailer applications, including utility, boat, cargo, and RV use. The welded bottom spring seat is specified to lower ride height, which matters when planning clearance and stance. Its five-lug hubs use a 5×4.5 bolt pattern for wheel matching.
- 3,500-pound axle capacity
- 62-inch hub face and 48-inch spring centers
- Five leaf springs
- Welded spring seat lowers ride height
- The 62-inch hub face will not suit a trailer requiring a 60-inch span.
Skip it if you need a 60-inch hub face; the Flynsu 3,500 lbs Trailer Axle, 60-inch Hubface 48-inch Spring Center matches that span.
Choose this Flynsu axle for a 3,500-pound light-duty trailer needing 62-inch hub face, 48-inch spring centers, and the listed five-spring setup. Its lower ride height and 5×4.5 wheel pattern remain important fit boundaries.
Full product details
| Brand | Flynsu |
|---|---|
| Item Weight | 77 pounds |
| Item model number | 3,500LB Straight Idler Trailer Axle |
| Manufacturer | Flynsu |
| Part Number | Flynsu 3,500LB Idler Trailer Axle |
| Model | 3,500LB Straight Idler Trailer Axle |
| Dimensions | 68.11 x 9.06 x 7.09 inches |
Listed on Amazon as: 3,500 lbs Trailer Axle, 62" Hubface 48" Spring Center, w/ 5 Leaf Springs
View on AmazonWhy it ranks #7: This 3,500-pound axle has the required 48-inch spring center, but its 62-inch hub face fits a different width than the 60-inch options.
A 62-inch hub-face span sets this LCI axle apart from 60-inch alternatives, while its 48-inch spring centers retain a defined trailer mounting layout. The 3,500-pound rating and four leaf springs make it relevant to buyers replacing an axle whose dimensions and load class match those specifications.
The 62-inch hub-face measurement is the key selection point for trailers needing a wider span than a 60-inch axle, while the 48-inch spring centers help check frame alignment. Four leaf springs and a positive camber bow are specified to support stability and tire alignment under load. The springs are 13⁄4 inches wide, a practical comparison point for an existing setup. Its 3,500-pound rating defines the stated capacity, so both the trailer's required dimensions and load class should guide selection.
- 3,500-pound axle rating
- 62-inch hub face
- 48-inch spring centers
- Four 13⁄4-inch-wide leaf springs and positive camber bow
- The 62-inch hub face is unsuitable when a trailer requires a 60-inch span.
Skip it if you need a 60-inch hub face; the LCI Lippert 3,500LB Straight Idler Trailer Axle 60HF 48SC has that measurement.
Choose this LCI axle when a 3,500-pound trailer replacement calls for 62-inch hub face and 48-inch spring centers, with four leaf springs and a positive camber bow. The 62-inch span is the central fit boundary.
Full product details
| Brand | LCI |
|---|---|
| Manufacturer | LCI |
Listed on Amazon as: LCI Lippert 3,500LB Straight Idler Trailer Axle 62HF 48SC
View on Amazon
#8
8. aYEHKGaaa 2,000 lb 60-Inch Axle
- Dimensions: 1.97 x 1.18 x 0.79 in
- Weight: 3.88 oz
Best for: Basic 48-inch-wide trailer replacement.
Why it ranks #8: The listing states a 60-inch hub face, 2,000-pound capacity, and 5-lug hubs, but does not clearly specify a 48-inch spring-center measurement.
This aYEHKGaaa replacement is specified for 2,000-pound trailers with 60-inch hub-face spacing, 48-inch-wide applications, and five-lug hubs. Those stated dimensions and capacity help buyers identify the intended compact-trailer use, including the listed 4×6, 4×8, camper, and smaller boat-trailer builds.
The 60-inch hub-face measurement and stated compatibility with 48-inch-wide, 4×6, and 4×8 trailers offer a straightforward starting point for matching the intended layout. Its 2,000-pound capacity defines the listed load class, while five-lug hubs and a 2.45-inch center hole provide wheel-interface details. The listing also identifies camper builds and smaller boat trailers as applications. It is explicitly described as a non-OEM part, a relevant distinction for buyers choosing a replacement component.
- 2,000-pound capacity
- 60-inch hub-face measurement
- Five-lug hubs with 2.45-inch center hole
- Listed for 4×6, 4×8, and 48-inch-wide trailers
- The listing identifies this as a non-OEM part.
Skip it if you require an OEM part; the LCI Lippert 3,500LB Straight Idler Trailer Axle is another listed replacement option.
This is aimed at buyers seeking a stated 2,000-pound replacement for a 48-inch-wide, 4×6, or 4×8 trailer. Its non-OEM status and the specified 60-inch hub face and five-lug configuration are key selection considerations.
Full product details
| Brand | aYEHKGaaa |
|---|---|
| Item Weight | 3.88 ounces |
| Item model number | aYEHKGaaa123 |
| Manufacturer | aYEHKGaaa |
| Part Number | aYEHKGaaa123 |
| Model | aYEHKGaaa673 |
| Dimensions | 1.97 x 1.18 x 0.79 inches |
Listed on Amazon as: Trailer Axle Replacement 2000 Lbs 60 Inch Hub Face 5 Lug Hubs Compatible with 4×6 4×8 48 Inch Wide Trailer
View on Amazon
#9
9. AAeAxtdfw 2,000 lb 60-Inch Axle
- Dimensions: 1.97 x 1.18 x 0.79 in
- Weight: 3.88 oz
Best for: Light-duty 4×6 and 4×8 trailers.
Why it ranks #9: It lists a 60-inch hub face, 5-lug hubs, and 2,000-pound capacity, but does not clearly confirm the 48-inch spring-center fit.
A 60-inch hub-face measurement paired with 48-inch-wide trailer compatibility gives this AAeAxtdfw axle a clear compact-trailer application. Its 2,000-pound rating and five-lug hubs are specified for 4×6 and 4×8 builds, while the 2.45-inch hub bore makes wheel-center clearance a concrete fit check.
The 60-inch hub-face span is identified as tire-center-to-tire-center spacing, helping buyers compare the axle with the intended 4×6 or 4×8 layout. Its 48-inch-wide trailer compatibility and 2,000-pound rating define the stated application and load class. Five-lug hubs provide the listed wheel attachment, but the 2.45-inch hub bore means the wheel center hole must be larger than 21⁄2 inches. That clearance requirement is important to resolve before selecting wheels for the assembly.
- 2,000-pound axle capacity
- 60-inch hub face
- Five-lug hubs
- 2.45-inch hub bore with stated wheel-center-hole requirement
- Wheels must have center holes larger than 21⁄2 inches to clear the hub bore.
Skip it if you need a 3,500-pound axle; the Flynsu 3,500 lbs Trailer Axle, 60-inch Hubface 48-inch Spring Center has that rating.
This AAeAxtdfw axle suits a 4×6, 4×8, or other listed 48-inch-wide trailer within its 2,000-pound capacity. Its 60-inch hub face and wheel center-hole clearance requirement are the main fit considerations.
Full product details
| Brand | AAeAxtdfw |
|---|---|
| Item Weight | 3.88 ounces |
| Item model number | AAeAxtdfw123 |
| Manufacturer | AAeAxtdfw |
| Part Number | AAeAxtdfw123 |
| Model | AAeAxtdfw597 |
| Dimensions | 1.97 x 1.18 x 0.79 inches |
Listed on Amazon as: Trailer Axle 2000 Lbs 60 Inch Hub Face 5 Lug Hubs Compatible with 4×6 4×8 48 Inch Wide Trailer
View on AmazonAvoid confusing trailer width with spring-center fit
A 48-inch trailer description does not by itself confirm a 48-inch spring-center axle fit. Spring center is the distance between the spring seats, while hub face measures from one hub face to the other; this set repeatedly pairs 48-inch spring centers with 60- or 62-inch hub faces. The two measurements serve different fit checks.
Products 7 and 8 describe compatibility with 48-inch-wide trailers and list 60-inch hub faces, but their supplied details do not clearly state a 48-inch spring-center measurement. Treat those fit claims cautiously and compare the actual axle mounting points with your trailer.
A 62-inch hub-face axle can have the correct 48-inch spring center yet still be wrong for a trailer designed around 60 inches. Measure the existing axle or trailer rather than inferring one dimension from another.
Check wheel fit beyond the five-lug description
A five-lug hub alone does not establish that your existing wheel will fit. Some listings give additional hub details: the Flynsu 3,500 lb 60HF 48SC specifies a 5×4.5 bolt pattern, while the two 2,000-pound listings from Getanye and Flynsu give a 2.45-inch center pilot and say the wheel’s center hole must be larger than 21⁄2 inches. The Getanye 3,500-pound listing also specifies a 41⁄2-inch bolt pattern and 1⁄2-inch lug studs.
These are useful checks, but the supplied information does not confirm every wheel, brake, or trailer-hardware combination. Compare the bolt pattern, center opening, and stud requirements with your current setup before purchase.
A mismatch can prevent proper wheel mounting even when axle capacity and spring-center spacing seem right.
How to Choose a 48-Inch Trailer Axle
Spring center and hub-face measurements
Look for an axle that matches both the spring-center and hub-face measurements on your trailer. Most of the clearly specified choices here pair a 48-inch spring center with a 60-inch hub face; the Flynsu and LCI Lippert 62HF models instead use a 62-inch hub face while retaining the 48-inch spring center. The two dimensions are not interchangeable.
A 60-inch hub-face axle is the more direct match when your existing axle measures 60 inches, while the 62-inch versions suit a trailer that calls for that wider hub-face spacing. Measure from the spring-seat centers and hub faces on the existing setup, and do not rely only on a 48-inch trailer-width description.
Capacity matched to the load
Choose an axle capacity that is appropriate for the trailer and its intended loaded use. This selection ranges from 2,000 pounds to 3,500 pounds: Getanye and Flynsu offer 2,000-pound 60HF/48SC models, while the 3,500-pound choices include 60HF/48SC and 62HF/48SC versions. A lighter 4×6 or 4×8 build may align with the listed 2,000-pound use case, while buyers whose trailer requires the higher stated rating can consider a 3,500-pound model.
These product ratings alone do not establish the capacity of the complete trailer or the correct load distribution. Check the trailer’s requirements and the ratings of its other components before deciding.
Hubs, bolt pattern, and spring package
Check the hub and spring details rather than treating all five-lug axles as interchangeable. The 3,500-pound Flynsu 60HF/48SC lists 5×4.5 hubs and five leaf springs; Getanye’s corresponding 3,500-pound axle also lists five springs, a 41⁄2-inch bolt pattern, and 1⁄2-inch lug studs. The LCI Lippert 60HF/48SC instead lists four leaf springs.
For 2,000-pound models, Getanye and Flynsu list five-lug hubs with a 2.45-inch center pilot and a wheel-center-hole requirement larger than 21⁄2 inches. Buyers replacing an existing assembly should prioritize matching the current hub and wheel details; those choosing among spring packages should confirm the trailer’s mounting setup.
Which 48-Inch Trailer Axle Should You Choose?
For a trailer requiring a 60-inch hub face, 48-inch spring center, and 3,500-pound rating, choose Flynsu 3,500 lb 60HF 48SC: it combines those dimensions with five leaf springs and 5×4.5 hubs. Getanye 3,500 lb 60HF 48SC is another five-spring option with a stated 41⁄2-inch bolt pattern and 1⁄2-inch studs; choose LCI Lippert 3,500 lb 60HF 48SC if its four-spring package matches your setup. For a lighter 2,000-pound application, compare Flynsu 2,000 lb 60HF 48SC and Getanye 2,000 lb 60HF 48SC.
If your trailer needs a 62-inch hub face, consider Flynsu 3,500 lb 62HF 48SC or LCI Lippert 3,500 lb 62HF 48SC. Verify measurements and wheel fit before ordering.
Related Buying Guides
Frequently Asked Questions
How do I measure spring-center and hub-face distances on my trailer?
Measure spring center from the center of one spring mounting position to the center of the other. Measure hub face across the axle from the mounting face of one hub to the mounting face of the other. Compare both measurements with the axle listing, and confirm whether it describes the same points before ordering.
How do I determine the axle capacity my loaded trailer needs?
Use the trailer’s loaded weight and the number of axles to determine the capacity required from each axle, while accounting for how the load is actually carried. Check the trailer’s rating information and do not exceed any component limit. The listed choices include 2,000- and 3,500-pound options.
What should I check to confirm a 5-lug hub fits my wheels and brakes?
Confirm the wheel’s bolt pattern matches the hub’s pattern, not just that both have five lugs. Check that the wheel and hub mounting details are compatible, and verify brake requirements separately; an idler axle listing does not establish brake compatibility. The listed 5×4.5 pattern is stated for one option.
How can I tell whether a 60-inch or 62-inch hub face is right?
Match the axle’s hub-face measurement to the distance your trailer setup requires, measuring between the hub mounting faces. The products here include both 60- and 62-inch hub-face options, while their spring-center measurement is 48 inches. Verify the required dimension on your trailer before selecting an axle.
When should I choose a five-spring axle over a four-spring option?
Choose the spring package that matches your trailer’s existing setup and requirements rather than assuming that more springs are automatically suitable. The listed 3,500-pound options include five-spring choices, while the LCI Lippert 60HF 48SC listing has a four-spring package. Confirm fit and compatibility before ordering.
Final Words
For a trailer needing a 48-inch spring center, 60-inch hub face, and 3,500-pound rating, the Flynsu 3,500 lb 60HF 48SC is the best overall choice in this group; it has five leaf springs and 5×4.5 hubs. Choose a 2,000-pound axle when that capacity fits your trailer, or a 62-inch hub-face option when required. Before ordering, verify axle measurements, capacity, spring package, and wheel compatibility.



