A strong left outer tie rod choice delivers a clearly identified driver-side part and vehicle fitment that matches your car; this roundup suits shoppers replacing one side or considering a paired set. The products here cover Ford, Acura, Nissan, Infiniti, Volkswagen, Audi, and Chevrolet applications, with several listings specifying both front-left and front-right ends. That distinction matters: a two-piece set may include the left end you need, but it also contains a right-side part.
Fitment ranges vary from a focused Chevrolet Impala application to broad model-year listings, and some require attention to engine, trim, or VIN details. Check the exact vehicle and side before ordering.
The comparison below prioritizes explicit left-side identification and usable compatibility information, then notes relevant materials, part references, and package details where provided.
The Metrix Premium Chassis Parts Acura Tie Rod Kit leads because its listing explicitly includes a front-left outer tie rod end, identifies the part as ES80288, and names compatibility with 2004–2008 Acura TSX and 2003–2007 Honda Accord. It is a two-piece kit with steel ends and a cotter pin, so it suits buyers who want the left side along with the matching right-side component. Verify your exact vehicle before ordering, since fitment—not the general tie rod description—determines whether it is appropriate.
Our Top Picks

The kit explicitly includes front-left end ES80288 and fits listed Acura TSX and Honda Accord applications; it also includes the right end and cotter pin.
View on Amazon
Pre-Greased EndsThe two-piece kit identifies a front-left outer end, is pre-greased, and lists fitment across Nissan, Chevrolet City Express, and other applications.
View on Amazon
Broad Nissan CoverageThis left-and-right set names left end ES800357 and covers listed Altima, Maxima, Murano, and Infiniti applications with some year and trim limits.
View on Amazon- Rogue Fitment A-Premium Rogue Tie Rod
Compare these outer tie rod options and fitment details
| # | Product | Package Dimensions | Weight | Buy |
|---|---|---|---|---|
| 1 | 1. Metrix Acura Tie Rod KitBest Overall | — | 3.45 lb | View on Amazon |
| 2 | 2. Metrix Nissan Tie Rod KitPre-Greased Ends | — | 2.89 lb | View on Amazon |
| 3 | 3. KDSA Nissan Tie Rod SetBroad Nissan Coverage | 15.43 x 6.38 x 2.32 in | 4.36 lb | View on Amazon |
| 4 | 4. KDSA Pathfinder Tie Rod SetPathfinder and newer Murano pair | 14.53 x 5.87 x 2.99 in | 4.09 lb | View on Amazon |
| 5 | 5. A-Premium Rogue Tie RodRogue Fitment | 10 x 4.02 x 2.01 in | 2.77 lb | View on Amazon |
| 6 | 6. X AUTOHAUX Nissan Tie Rod SetNissan left-and-right replacement pair | 11.77 x 5.31 x 2.99 in | 3.67 lb | View on Amazon |
| 7 | 7. Metrix Infiniti Tie Rod KitInfiniti and Nissan 370Z fitment | — | 3.2 lb | View on Amazon |
| 8 | 8. NewYall Ford Tie Rod SetFord multi-model front-end refresh | 12.95 x 6.89 x 2.87 in | 5.04 lb | View on Amazon |
| 9 | 9. A-Premium VW Tie RodVolkswagen and Audi application range | 15.2 x 3.54 x 2.24 in | 3.48 lb | View on Amazon |
| 10 | 10. MOOG Impala Tie RodSingle MOOG replacement end | — | 1.12 lb | View on Amazon |
Detailed Reviews: Best Left Outer Tie Rod
Why it ranks #1: The kit explicitly includes front-left end ES80288 and fits listed Acura TSX and Honda Accord applications; it also includes the right end and cotter pin.
Two steel outer ends, one front right and one front left, make this Metrix kit a clear paired replacement option for its listed Acura and Honda applications. The included cotter pin and stated vehicle coverage help buyers identify both the package contents and its intended models.
The kit names the 2004–2008 Acura TSX and 2003–2007 Honda Accord, giving owners a defined application range to check. Its two steel outer ends cover the front right and left sides, so the package addresses both positions rather than requiring buyers to source each side separately. Cotter pins are included, a useful installation detail. Metrix also states that the parts are designed to surpass OEM specifications and are IATF 16949 and ISO 9001 certified.
- Pair includes front left and right outer ends
- Steel construction is specified
- Cotter pin comes with the kit
- Lists Acura TSX and Honda Accord applications
- Fitment is limited to the listed Acura TSX and Honda Accord years.
Skip it if you need inner tie rod ends or a kit for a Nissan; this package lists only front outer ends for Acura TSX and Honda Accord applications.
Choose this pair if you have a listed Acura TSX or Honda Accord and need both front outer sides with cotter pins included. Its stated coverage does not extend beyond the named models and years.
Full product details
| Brand | METRIX PREMIUM CHASSIS PARTS |
|---|---|
| Item Weight | 3.45 pounds |
| Item model number | 99788MT |
| Manufacturer | METRIX PREMIUM CHASSIS PARTS |
| Part Number | 99788MT |
| Model | 99788MT |
| Dimensions | 8.9 x 2.52 x 2.76 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including carbon black (airborne, unbound particles of respirable size) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Metrix Premium Chassis Parts Outer Tie Rod End Kit Fits Acura TSX 2004-2008
View on Amazon
#2 · Pre-Greased Ends
2. Metrix Nissan Tie Rod Kit
- Weight: 2.89 lb
Best for: Broad Nissan and Chevrolet coverage.
Why it ranks #2: The two-piece kit identifies a front-left outer end, is pre-greased, and lists fitment across Nissan, Chevrolet City Express, and other applications.
Pre-greased steel construction distinguishes this two-end Metrix kit, pairing front left and right outer ends with a wide list of Nissan applications and Chevrolet City Express. Pre-greasing supports smooth movement, while the broad vehicle list gives owners several specific fitment paths to verify.
Applications include Nissan Kicks, Sentra, NV200, Juke, and Leaf, plus Chevrolet City Express, with year and engine details stated for some versions. The included front-left and front-right ends make this a paired outer replacement, while pre-greasing is specified for extended lifespan and smooth movement. Steel is the stated material, and Metrix says the parts are designed to surpass OEM specifications. Review the specific year and submodel notes before choosing among the listed applications.
- Includes front left and right outer ends
- Pre-greased for smooth movement
- Steel material is specified
- Covers several Nissan models and Chevrolet City Express
- Some listed applications have specific year, market, or engine qualifications.
Skip it if you need a kit for an Acura TSX or Honda Accord; the Metrix 99788MT lists those models instead.
This is a fitment-focused option for owners of the listed Nissan models or Chevrolet City Express who need a pre-greased pair of outer ends. Check the stated year and submodel qualifications carefully before ordering.
Full product details
| Brand | METRIX PREMIUM CHASSIS PARTS |
|---|---|
| Item Weight | 2.89 pounds |
| Item model number | 99334MT |
| Manufacturer | METRIX PREMIUM CHASSIS PARTS |
| Part Number | 99334MT |
| Model | 99334MT |
| Dimensions | 8.43 x 1.73 x 2.68 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including carbon black (airborne, unbound particles of respirable size) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Metrix Premium Chassis Parts Outer Tie Rod End Kit Fits Nissan Kicks 18-20
View on Amazon
#3 · Broad Nissan Coverage
3. KDSA Nissan Tie Rod Set
- Package Dimensions: 15.43 x 6.38 x 2.32 in
- Weight: 4.36 lb
Best for: Nissan and Infiniti front pair.
Why it ranks #3: This left-and-right set names left end ES800357 and covers listed Altima, Maxima, Murano, and Infiniti applications with some year and trim limits.
This KDSA package supplies two front outer ends, one left and one right, for select Nissan and Infiniti applications. Its fitment list spans Altima, Maxima, Murano, FX37, and QX70, with year, drivetrain, trim, and coupe notes that help define where the pair applies.
The listed range includes Altima 2007–2013, Maxima 2009–2014, Murano 2009–2014, Infiniti FX37 2013, and QX70 2014. Important exceptions narrow coverage: some Altima years exclude particular trims or body styles, and Murano 2009–2012 is specified as FWD only. The package identifies separate left and right outer ends and says installation is easy, with precision tolerances. Those qualifications make checking the exact vehicle configuration essential before installation.
- Includes one front left and one front right outer end
- Covers several Nissan and Infiniti models
- Lists drivetrain and trim exceptions
- States precision tolerances for installation
- Fitment includes several year-specific trim and drivetrain exclusions.
Skip it if you have a Nissan Pathfinder or a 2015-or-newer Murano; KDSA ES801265/ES801266 lists those applications instead.
Owners of the listed Altima, Maxima, Murano, FX37, or QX70 applications can consider this paired front outer set. Its year-specific exclusions make exact trim, drivetrain, and body-style checks important.
Full product details
| Brand | KDSA |
|---|---|
| Item Weight | 4.36 pounds |
| Manufacturer | KDSA |
| Part Number | ES800357 ES800358 |
| Package Dimensions | 15.43 x 6.38 x 2.32 inches |
Listed on Amazon as: Front Outer Tie Rods for Nissan Maxima Murano Altima for INFINITI FX37 QX70
View on Amazon
#4
4. KDSA Pathfinder Tie Rod Set
- Package Dimensions: 14.53 x 5.87 x 2.99 in
- Weight: 4.09 lb
Best for: Pathfinder and newer Murano pair.
Why it ranks #4: The listing identifies the front-left end and covers Nissan Pathfinder and Murano plus Infiniti QX60 and JX35, with model-year and engine details.
A paired left-and-right front outer set for Nissan Pathfinder and Murano models is the central advantage of this KDSA listing. It also covers Infiniti QX60 and JX35 applications, with a specific engine restriction for some QX60 years to narrow fitment.
The stated range includes Nissan Murano 2015–2022 and Pathfinder 2013–2020, both listed as all models, plus Infiniti QX60 2014–2020 and JX35 2013. For QX60 model years 2016–2017, the listing limits fitment to 3.5L. Separate left and right ends are included, and KDSA states precision tolerances for easy installation. These details support choosing a matched pair while emphasizing the QX60 engine qualification.
- Includes front left and right outer ends
- Lists Murano 2015–2022 and Pathfinder 2013–2020
- Covers Infiniti QX60 and JX35 applications
- States precision tolerances for installation
- QX60 fitment for 2016–2017 is limited to 3.5L.
Skip it if you need the older Murano 2009–2012 application; KDSA ES800357/ES800358 lists that range instead.
This pair suits owners of the listed Pathfinder, newer Murano, QX60, or JX35 applications seeking both front outer sides. The QX60 engine note and stated year ranges define its fitment limits.
Full product details
| Brand | KDSA |
|---|---|
| Item Weight | 4.09 pounds |
| Manufacturer | KDSA |
| Part Number | ES801265 ES801266 |
| Package Dimensions | 14.53 x 5.87 x 2.99 inches |
Listed on Amazon as: Front Outer Tie Rods for Nissan Pathfinder Murano, for INFINITI QX60 JX35
View on Amazon
#5 · Rogue Fitment
5. A-Premium Rogue Tie Rod
- Package Dimensions: 10 x 4.02 x 2.01 in
- Weight: 2.77 lb
Best for: Rogue front-side replacement pair.
Why it ranks #5: It is explicitly for front outer left and right positions on specified Nissan Rogue models, but the fitment is limited to L4 2.5L models.
Coverage for both front outer sides on the Nissan Rogue and Rogue Select is the main appeal of this A-Premium part. Its stated fitment is limited to 2.5L models, and the listing connects replacement with addressing loose or shaky steering, suspension noises, uneven tire wear, or steering drift.
A-Premium specifies driver and passenger front outer positions, making the listing relevant when both sides are being considered together. Its vehicle range covers the Rogue from 2008–2013 and Rogue Select from 2014–2015, but only with the L4 2.5L engine. The listed symptoms—shaky steering, clunky or squeaky suspension noises, uneven tire wear, and drift—help frame the intended repair context. Use the engine and model-year restriction as a firm fitment boundary.
- Lists both front outer positions
- Covers Rogue and Rogue Select applications
- Specifies the L4 2.5L restriction
- Names steering, noise, and tire-wear symptoms it may address
- Fitment is restricted to L4 2.5L Rogue models.
Skip it if you drive a Rogue with an engine other than the listed L4 2.5L; this product's stated fitment does not cover it.
Rogue and Rogue Select owners with the specified L4 2.5L application can consider this front outer replacement for listed steering or suspension symptoms. Engine and year coverage are the key boundaries to verify.
Full product details
| Brand | A-Premium |
|---|---|
| Item Weight | 2.77 pounds |
| Item model number | APCA5043 |
| Manufacturer | PremiumpartsWhosale |
| Part Number | APCA5043 |
| Package Dimensions | 10 x 4.02 x 2.01 inches |
Listed on Amazon as: A-Premium Front Outer Tie Rod End Fix Uneven Tire Wear
View on Amazon
#6
6. X AUTOHAUX Nissan Tie Rod Set
- Package Dimensions: 11.77 x 5.31 x 2.99 in
- Weight: 3.67 lb
Best for: Nissan left-and-right replacement pair.
Why it ranks #6: The listing specifies front outer left and right placement and provides OE references, with compatibility listed for Altima, Maxima, and Murano.
This X AUTOHAUX package combines front left and right outer ends for listed Nissan Altima, Maxima, and Murano applications. Its stated fitment reaches Altima 2007–2015, while surface treatment and abrasion and corrosion resistance are additional details for buyers weighing durability.
The package includes one ES800357 left end and one ES800358 right end, and lists Altima 2007–2015, Maxima 2009–2018, and Murano 2009–2012. That makes the stated coverage broader for Maxima than the KDSA ES800357/ES800358 listing, while the shared part-number pair helps identify the application. X AUTOHAUX describes a durable anti-rust surface treatment and resistance to abrasion and environmental corrosion. These features support durability considerations, but exact vehicle fitment still depends on the listed range.
- Includes front left and right outer ends
- Lists three Nissan model lines
- Specifies anti-rust surface treatment
- Describes resistance to abrasion and environmental corrosion
- Murano coverage is limited to 2009–2012.
Skip it if you need a 2015–2022 Murano application; KDSA ES801265/ES801266 lists that newer range instead.
This paired set suits owners of the listed Altima, Maxima, or earlier Murano applications who want both front outer sides. The Murano range ends at 2012, so year coverage is a key boundary.
Full product details
| Brand | X AUTOHAUX |
|---|---|
| Item Weight | 3.67 pounds |
| Item model number | a22071800ux0100 |
| Manufacturer | X AUTOHAUX |
| Part Number | a22071800ux0100 |
| Package Dimensions | 11.77 x 5.31 x 2.99 inches |
Listed on Amazon as: X AUTOHAUX 2pcs Front Outer Tie Rod End Links for Nissan Altima 2007-2015
View on AmazonWhy it ranks #7: This two-piece kit serves a long list of Infiniti and Nissan applications, but the supplied fitment details do not identify which included end is left.
A wide Infiniti application list, extending across Q-series, M-series, EX, and G models, sets this Metrix outer tie rod end kit apart. The stated coverage also includes Nissan 370Z, giving buyers several named vehicle families to check against the exact model year.
The listed vehicles include Infiniti Q50, Q60, Q70, Q70L, QX50, EX35, EX37, G-series, and M-series applications, plus Nissan 370Z from 2009–2020. That breadth can help owners of less commonly grouped model lines identify a listed fitment, but the years vary by model and should be checked individually. The title identifies a kit, while the supplied details do not state its contents or left/right positions; verify those package specifics before planning a repair.
- Lists numerous Infiniti model families
- Includes Nissan 370Z applications
- Provides model-specific year ranges
- Covers both newer Q-series and earlier EX, G, and M models
- The supplied details do not specify kit contents or left/right positions.
Skip it if you require confirmed left-and-right contents in the listing; the supplied details do not identify the sides included.
Infiniti owners across the listed Q, EX, G, and M families, as well as Nissan 370Z owners, can use this broad fitment list to begin selection. Model-specific years and unspecified kit contents are boundaries.
Full product details
| Brand | METRIX PREMIUM CHASSIS PARTS |
|---|---|
| Item Weight | 3.2 pounds |
| Item model number | 99840MT |
| Manufacturer | METRIX PREMIUM CHASSIS PARTS |
| Part Number | 99840MT |
| Model | 99840MT |
| Dimensions | 8.5 x 2.17 x 3.66 inches |
| Additional Information | Important Information Proposition 65 Warning for California Consumers WARNING: This product can expose you to chemicals including carbon black (airborne, unbound particles of respirable size) which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov |
Listed on Amazon as: Metrix Premium Chassis Parts Outer Tie Rod End Kit Fits Q70L 15-19, Q50
View on Amazon
#8
8. NewYall Ford Tie Rod Set
- Package Dimensions: 12.95 x 6.89 x 2.87 in
- Weight: 5.04 lb
Best for: Ford multi-model front-end refresh.
Why it ranks #8: The set includes inner and outer steering ends for left and right sides across listed Ford models, though it does not isolate the outer left end.
Coverage across the Ford C-Max, Escape, Focus, and Transit Connect is the key distinction here, giving owners of several model lines one named fitment range to check. The set is identified as inner and outer front steering tie rod ends for both left and right sides.
The listed years span 2013–2018 for the C-Max, Escape, and Transit Connect, and 2012–2018 for the Focus, which makes the fitment information useful for narrowing the application before ordering. Because the title identifies both inner and outer ends and left and right sides, this set suits a broader front steering refresh than an outer-end-only kit. Check the vehicle’s model and year against the stated range; the supplied details do not specify material or installation features.
- Covers four named Ford model lines
- Includes inner and outer tie rod ends
- Identifies front left and right sides
- Lists distinct year ranges for Focus and other models
- The supplied details do not state the tie rod ends’ material or installation features.
Skip it if you need a kit for a Nissan, Acura, or Volkswagen; the listed fitment is limited to specified Ford models and years.
Ford C-Max, Escape, Focus, and Transit Connect owners seeking inner and outer front steering parts can use the listed model-year range as a starting point. Treat vehicle and year fitment as the boundary before selecting this set.
Full product details
| Brand | NewYall |
|---|---|
| Item Weight | 5.04 pounds |
| Item model number | AV6Z328OE |
| Manufacturer | NewYall |
| Part Number | AV6Z328OE |
| Package Dimensions | 12.95 x 6.89 x 2.87 inches |
Listed on Amazon as: NewYall Inner and Outer Front Left Right Steering Tie Rod End Set
View on Amazon
#9
9. A-Premium VW Tie Rod
- Package Dimensions: 15.2 x 3.54 x 2.24 in
- Weight: 3.48 lb
Best for: Volkswagen and Audi application range.
Why it ranks #9: Its broad Audi and Volkswagen fitment list makes it a possible vehicle-specific option, but the supplied details do not specify left-side placement.
A broad Audi and Volkswagen application list is the defining feature of this A-Premium outer tie rod end, spanning models such as A3, Q3, Jetta, Golf, and Tiguan. The specific model-year and VIN notes make checking the exact vehicle particularly important before purchase.
The supplied fitment includes Audi A3, A3 Sportback e-tron, Q3, and S3 applications, alongside numerous Volkswagen models and years. Some entries carry qualifications: for example, the 2005–2006 Jetta and 2010 Golf listings specify VIN digits AJ or 1K. Those details help distinguish applications that share a model name but have narrower stated fitment. The supplied information identifies an outer tie rod end, but does not establish package quantity or left/right position.
- Lists Audi and Volkswagen applications
- Covers multiple model families including A3, Q3, Jetta, and Golf
- Provides year ranges for many applications
- Includes specific VIN-digit qualifications for certain listings
- The supplied details do not specify package quantity or left/right position.
Skip it if you need a confirmed two-side kit; these supplied details identify an outer end but do not state the package quantity or side.
Audi and Volkswagen owners can use the extensive application list to assess this outer end, especially where the stated VIN notes apply. The supplied details leave package quantity and side unspecified, so those are important boundaries.
Full product details
| Brand | A-Premium |
|---|---|
| Item Weight | 3.48 pounds |
| Manufacturer | PremiumpartsWhosale |
| Part Number | APCA4794 |
| Package Dimensions | 15.2 x 3.54 x 2.24 inches |
Listed on Amazon as: A-Premium Front Outer Tie Rod End, Compatible with Volkswagen, Audi
View on AmazonWhy it ranks #10: The listing gives Chevrolet Impala and Buick fitment and durability-related design details, but does not specify a left-side position.
MOOG’s heat-treated ball stud is the notable construction detail on this outer tie rod end, intended to inhibit premature failure and improve fatigue strength. Its listed applications include several Buick models and Chevrolet Impala versions, making the specific year range central to fitment.
The product is a single outer tie rod end, unlike a paired kit, so buyers replacing both sides need to account for the stated package scope. Compatibility spans selected Buick LaCrosse, Allure, Century, and Regal years, along with Chevrolet Impala and Impala Limited applications. MOOG also describes a pressed-in cover plate, where applicable, as helping seal out debris and reduce looseness and bearing wear. These features connect construction to durability, subject to fitment and plate applicability.
- Heat-treated ball stud is specified
- Cover plate can seal out debris where applicable
- Lists Buick and Chevrolet applications
- MOOG describes installation as fast and hassle-free
- This listing is for a single tie rod end, not a left-and-right pair.
Skip it if you need both front outer sides in one package; this listing identifies a single MOOG ES3459 end.
Consider this MOOG end for a listed Buick or Chevrolet application when replacing one outer tie rod end. It is a single piece, and the cover-plate feature applies only where applicable.
Full product details
| Brand | MOOG |
|---|---|
| Item Weight | 1.12 pounds |
| Item model number | ES3459 |
| Manufacturer | MOOG Chassis Products |
| Part Number | ES3459 |
| Model | TIE ROD END |
| Dimensions | 0.4 x 1.7 x 0.6 inches |
Listed on Amazon as: MOOG ES3459 Steering Tie Rod End for 2000-2013 Chevrolet Impala
View on AmazonWhy a left-and-right set can be a fitment trap
A left-and-right set can contain the needed left end, but it is not the same purchase as a single left-side replacement. Several listings make the distinction explicit: Metrix Acura Tie Rod Kit includes front-left ES80288 and a front-right end, while KDSA Nissan Tie Rod Set identifies ES800357 as left and ES800358 as right. Check the package contents and side-specific references before ordering, particularly if you intend to replace only one side.
Fitment descriptions can also contain exceptions: KDSA Nissan Tie Rod Set gives exclusions by year, trim, or drivetrain, and A-Premium Rogue Tie Rod is limited to L4 2.5L models. A matching make and model name alone is not enough to establish compatibility.
Compare the listing’s year range and any engine, trim, VIN, or drivetrain note with your vehicle details, and confirm the driver-side designation rather than relying on a generic outer tie rod label.
What the listed details do—and do not—tell you
The listings provide different levels of certainty about side and vehicle fitment, so they are not interchangeable on description alone. Metrix Acura Tie Rod Kit and Metrix Nissan Tie Rod Kit name a front-left end and give a part reference; MOOG Impala Tie Rod lists vehicle applications but does not state left-side placement in the supplied details. Some products bundle inner and outer ends or both sides, as with NewYall Ford Tie Rod Set, while others are explicitly front outer sets.
These differences affect how confidently you can identify the needed component from the listing, not whether it will fit an unlisted vehicle. Manufacturer part numbers and OE references can help you compare a candidate to your existing part, but the product data here does not provide dimensions for every end or confirm interchangeability across listings.
If side placement or exact fit remains unclear, verify against the vehicle’s parts information before purchase.
How to Choose a Left Outer Tie Rod
Exact vehicle and fitment limits
Start by matching the full vehicle details and every fitment exception in the listing. The products range from Metrix Acura Tie Rod Kit, listed for 2004–2008 Acura TSX and 2003–2007 Honda Accord, to Metrix Infiniti Tie Rod Kit, which lists numerous Infiniti models and Nissan 370Z applications across several year ranges. A-Premium Rogue Tie Rod is restricted to L4 2.5L models, while KDSA Nissan Tie Rod Set lists year, trim, and drivetrain exclusions for some applications.
Buyers with a narrowly specified vehicle should favor a listing that names their exact model and configuration; shoppers with a vehicle in a broad range should still verify all exceptions rather than assume every trim fits.
Side identification and package contents
Look for an explicit front-left designation and check whether the package includes one end or both sides. Metrix Acura Tie Rod Kit identifies left end ES80288 and includes a front-right end as well; KDSA Pathfinder Tie Rod Set likewise describes left and right ends. NewYall Ford Tie Rod Set goes further by listing inner and outer ends for both left and right sides, so it is not simply a single outer-left part.
By contrast, MOOG Impala Tie Rod does not identify the side in the supplied details. If replacing only the driver-side end, prioritize a listing with a clear left-side reference; if you want both sides, a paired set may match that need, provided its fitment is exact.
Part references and construction details
Use listed part references and construction details to distinguish otherwise similar choices, but do not treat them as a substitute for fitment confirmation. Metrix Acura Tie Rod Kit lists ES80287 and ES80288, while X AUTOHAUX Nissan Tie Rod Set provides ES800357, ES800358, D8640JA00A, and D8520JA00A. Metrix Nissan Tie Rod Kit says its ends are steel and pre-greased; MOOG Impala Tie Rod notes heat-treated ball studs and a pressed-in cover plate where applicable.
Buyers comparing a replacement against an existing reference may find those identifiers useful, while shoppers prioritizing a stated feature can focus on the construction detail provided. The listings do not provide the same information for every product, so avoid assuming an unmentioned material or feature.
Which Left Outer Tie Rod Should You Choose?
For an Acura TSX or listed Honda Accord application, choose Metrix Acura Tie Rod Kit: it explicitly names the front-left end and includes the right end too. For a compatible Nissan Kicks, Sentra, NV200, Juke, Leaf, or City Express, Metrix Nissan Tie Rod Kit provides a pre-greased left end. Nissan Altima, Maxima, and Murano shoppers can compare KDSA Nissan Tie Rod Set with X AUTOHAUX Nissan Tie Rod Set, checking the exact year and trim exceptions.
For Pathfinder or newer Murano applications, consider KDSA Pathfinder Tie Rod Set; for a qualifying Rogue L4 2.5L, consider A-Premium Rogue Tie Rod. The remaining listings suit specific Ford, Volkswagen/Audi, Infiniti, or Chevrolet applications, but some supplied details do not confirm left-side placement.
Verify the vehicle and side before ordering.
Related Buying Guides
Frequently Asked Questions
How can I confirm whether my vehicle needs a left or right outer tie rod end?
Check your vehicle’s service information or ask a qualified parts professional to identify the faulty side, then match the listing to your exact vehicle. Confirm the stated front-left or front-right position rather than relying on a general tie rod description. The Metrix Acura kit explicitly identifies a front-left end.
Should I replace both outer tie rod ends at the same time?
Not automatically; replace the side that has been diagnosed as faulty unless inspection or a professional recommends doing both. A matching pair can be convenient, and the Metrix Acura kit includes both left and right components. Confirm that both parts fit your vehicle before choosing a set.
Does replacing an outer tie rod end require a wheel alignment?
Plan to have the alignment checked after replacement. Changing an outer tie rod end can affect steering geometry, and an alignment check helps confirm the wheels are set correctly. Follow your repair professional’s guidance, especially if the steering wheel is off-center or the vehicle pulls after the work.
What should I check before ordering a multi-vehicle tie rod listing?
Match the exact year, make, model, and relevant trim or engine details to the listing, then confirm the side and position. Some listings cover several vehicles or note exceptions, so a broad compatibility title is not enough. The editorial verdict specifically advises checking year and trim exceptions for the Nissan sets.
How can I tell whether a listing includes the left-side part?
Look for explicit left-side wording in the product details and verify the part number and vehicle fitment. A title that says only “front outer” may not confirm left-side placement. The Metrix Acura listing names a front-left end, while the editorial verdict notes that some other listings do not confirm the side.
Final Words
For a listed Acura TSX or Honda Accord application, the Metrix Acura kit is the clearest choice: it identifies the front-left end and includes the matching right-side component. For other vehicles, use the listed applications as a starting point, then verify exact year, trim, and side before ordering. The Nissan options cover different vehicle groups, while several remaining listings need especially careful side and fitment confirmation.



