Best 5X112 Deep Dish Wheels: Compare 10 Options

#1 · Best Overall

1. Aodhan AFF07 Custom Wheel

• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car
• Wheel Size: 19 in

Best for: Silver-machined 19-inch buyers.

Why it ranks #1: Its listed 45.7 mm convacity profile directly supports the deep-dish brief, with 19×8.5 sizing, 35 mm offset, and 66.6 mm hub bore.

The AODHÁN AFF07 pairs a 19×8.5-inch size with a 5×112 pattern and 35mm offset, giving buyers substantial listed dimensions to evaluate for their setup. Its 66.6mm hub bore and 45.7mm concavity profile add specific geometry, while the Gloss Silver Machined Face finish defines the look.

The 19×8.5 size, 5×112 pattern, and 35mm offset provide concrete figures for comparing the AFF07 with a vehicle’s requirements. Its 66.6mm hub bore adds another fitment measurement, and the 45.7mm concavity profile describes the wheel’s face geometry. A maximum load of 1,653 pounds is stated, providing a capacity figure to consider. The aluminum construction and Gloss Silver Machined Face finish complete the listed material and appearance details.

Skip it if you need a smaller-diameter wheel; this AFF07 listing specifies a 19-inch diameter.

This AFF07 suits buyers whose plans call for a 19×8.5, 5×112 wheel with 35mm offset and a silver machined face. Check its 66.6mm bore, concavity profile, and stated load against your intended fitment.

Listed on Amazon as: Aodhan AFF07 Custom Wheel – 19×8.5, 35 Offset, 5×112 Bolt Pattern, 66.6mm Hub – Silver with Machined Face Rim

#2 · Deepest Listed Profile

2. Aodhan AH-11 Wheel

• Material: Single Phase Forged
• Compatible with Vehicle Type: Passenger Car
• Wheel Size: 18 in

Best for: Silver 18-inch fitment planners.

Why it ranks #2: The 18×8.5 wheel explicitly lists a 46.5 mm convacity profile, plus 35 mm offset and 1521 lb maximum load.

The AODHÁN AH-11 combines an 18×8.5-inch width with a 35mm offset, giving shoppers a wider listed size and a defined offset to evaluate for a 5×112 setup. Its 73.1mm hub bore, Gloss Silver Machined Face finish, and stated load limit provide further concrete details for narrowing a wheel choice.

The 5×112 pattern, 18×8.5 size, and 35mm offset give buyers several core dimensions to compare with their vehicle’s requirements. The 73.1mm hub bore adds a hub measurement to that fitment check. Proper installation requires conical-seated lug nuts or bolts, which are not included, so buyers need to source the required hardware separately. The stated 1,521-pound maximum load and 46.5mm concavity profile offer additional specifications for evaluating the wheel.

Skip it if you need installation hardware in the box; conical-seated lugs or bolts must be sourced separately.

This AH-11 suits buyers comparing 18×8.5-inch, 5×112 wheels with a 35mm offset and silver machined face. Account for its 73.1mm bore and separately supplied conical-seat hardware when planning installation.

Listed on Amazon as: Aodhan AH-11 Wheel : 18×8.5, 5×112 Bolt Pattern, 73.1mm Hub bore, 35mm Offset – Gloss Silver Machined Face

#3 · Widest Listed

3. Konig Hypergram

• Material: Aluminum
• Wheel Size: 17 in

Best for: Matte-gray 17-inch wheel seekers.

Why it ranks #3: Its 17×9 size is the widest specified option here, and its flow-formed aluminum construction and 5×112 pattern suit buyers prioritizing width.

The Konig Hypergram pairs a 17×9-inch size with a 5×112 bolt pattern and ET42 offset, giving buyers specific dimensions for evaluating a wider wheel setup. Its matte-gray finish and split six-spoke design distinguish its appearance, while dual lightning holes in the PCD area add a clearly stated design detail.

The 17×9 dimensions and ET42 offset help buyers compare the Hypergram with their vehicle’s wheel requirements, while the 5×112 pattern identifies its mounting specification. Its aluminum material gives the wheel a stated construction, and the matte-gray finish defines the look. Konig’s split six-spoke design includes dual lightning holes drilled into the PCD area, making the spoke layout a specific visual feature rather than a plain, unspecified face.

Skip it if you need an 18-inch or other listed diameter; this Hypergram configuration is 17 inches.

Pick the Hypergram if you want a 17×9, 5×112 wheel with ET42 offset and a matte-gray split-spoke face. Its listed size and finish define the choice, so verify those dimensions against your intended setup.

Listed on Amazon as: Konig – Hypergram 17X9 5X112 ET42 Matte Grey Flow Formed (KIGHG9751242G)

#4 · Broad Size Range

4. Konig Hexaform

• Wheel Size: 17 in

Best for: Matte-black 17-inch shoppers.

Why it ranks #4: The listed 17×8 wheel has a +40 mm offset and matte-black finish; its description says the model spans 17–20 inches and 8–11-inch widths.

The Konig Hexaform combines a 17×8-inch size with a 5×112 pattern and +40mm offset, giving buyers specific fitment numbers in a matte-black finish. Its six-spoke face has recessed outer spoke edges, a design detail that differentiates the wheel visually while keeping the listed dimensions central to selection.

The 17×8 size, 5×112 bolt pattern, and +40mm offset help buyers evaluate the Hexaform against their vehicle’s requirements. Its matte-black finish and six-spoke design with recessed outer spoke edges provide clear styling details. The product listing specifies quantity one, so a buyer planning a full set should account for that unit quantity. Konig describes the broader Hexaform range as spanning 17- to 20-inch diameters and 8- to 11-inch widths, though this listing is the 17×8 version.

Skip it if you need multiple wheels in one listing; this Hexaform item is listed as quantity one.

Choose the Hexaform if a matte-black 17×8 wheel with 5×112 fitment and +40mm offset matches your plans. Its recessed-edge six-spoke design adds a distinct look; account for the single listed unit.

Listed on Amazon as: Konig Hexaform Custom Wheel – 17×8, 40 Offset, 5×112 Bolt Pattern, 66.6mm Hub – Matte Black Rim

#5

5. RTX Envy 17-inch

• Material: Alloy Steel
• Compatible with Vehicle Type: Truck
• Wheel Size: 17 in

Best for: Compact 17-inch Envy shoppers.

Why it ranks #5: This 17×7.5 option gives a 5×112 pattern, 38 mm offset, 66.6 mm hub bore, and a stated 1521 lb load.

This RTX Envy uses a 17×7.5-inch size, 38mm offset, and 5×112 bolt pattern, giving buyers defined dimensions for evaluating a more compact wheel setup. The 66.6mm hub bore and 1,521-pound stated load add fitment and capacity details, while the gloss-black finish keeps the appearance specification clear.

The 17×7.5 dimensions and 38mm offset help buyers compare the wheel with their setup, while its 5×112 pattern identifies the mounting specification. A 66.6mm hub bore adds another measurement to the fitment check. RTX lists a 1,521-pound load, which provides a stated capacity figure for evaluation. The gloss-black Envy finish supplies a consistent appearance detail, and the 17-inch diameter distinguishes it from larger listed wheel options.

Skip it if you require an 18-inch wheel; this RTX Envy is listed in a 17×7.5 size.

Choose this Envy if your requirements call for a 17×7.5 wheel, 5×112 pattern, 38mm offset, and gloss-black finish. Its 66.6mm bore and stated load are useful checks, but the size is specific.

Listed on Amazon as: RTX® (RTX) • 082756 • Envy • Gloss Black • 17×7.5 5×112 ET38 CB66.6

#6

6. RTX Envy 18-inch

• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car
• Wheel Size: 18 in

Best for: Gloss-black 18-inch fitment shoppers.

Why it ranks #6: The 18×8 size, 38 mm offset, and 66.6 mm hub bore provide useful fitment details, though no lip or concavity profile is listed.

The RTX Envy combines an 18×8-inch size with a 38mm offset and 5×112 bolt pattern, giving buyers a clear set of dimensions to compare for a wheel change. Its 66.6mm hub bore, stated 1,543-pound load, and gloss-black finish add practical fitment and appearance details to the specification.

The 5×112 pattern, 18×8 size, and 38mm offset provide core figures for checking the Envy against a vehicle’s wheel requirements. Its 66.6mm hub bore supplies another fitment measurement, while the stated 1,543-pound load helps buyers assess the listed capacity. Aluminum construction is specified, and the gloss-black finish gives the wheel a defined appearance. Together, these details help narrow a choice without relying on an unspecified wheel size or finish.

Skip it if you want a 17-inch wheel; this Envy configuration is listed as 18×8 inches.

This Envy fits buyers seeking a gloss-black 18×8 wheel with 5×112 mounting, 38mm offset, and a 66.6mm bore. Use those measurements and its stated load when assessing whether it suits your vehicle.

Listed on Amazon as: RTX ENVY Custom Wheel – 18×8, 38 Offset, 5×112 Bolt Pattern, 66.6mm Hub – Gloss Black Rim

#7 · Lightest Listed

7. Enkei RPF1

• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car
• Wheel Size: 18 in

Best for: Track-focused Enkei buyers.

Why it ranks #7: Its listed 18-pound weight is the lowest supplied among the products with a stated weight, and the 18×8 wheel uses a 5×112 pattern.

The Enkei RPF1 pairs an 18×8-inch, 5×112 configuration with a 35mm offset and 73mm bore, while its Spec-E standard calls for higher impact-drop energy and 20% more rotational fatigue cycles than standard JWL guidelines. Those details make it a specification-rich option for buyers considering track use.

The 18×8 size, 5×112 pattern, 35mm offset, and 73mm bore give buyers concrete fitment figures to assess. Enkei’s stated Spec-E standard demands higher impact-drop energy and 20% more rotational fatigue cycles than standard JWL guidelines, supplying a specific testing benchmark. The dual-spoke distribution is described as spreading side stresses to increase rigidity under heavy lateral g-forces while optimizing brake-caliper clearance. A multi-stage surface treatment is stated to shield against track heat, road salt, and brake dust.

Skip it if you need a different diameter or width; this RPF1 listing specifies 18×8.

The RPF1 suits buyers assessing an 18×8 wheel for track-oriented use, with stated fatigue-cycle testing, dual-spoke stress distribution, and surface protection. Check its 35mm offset and 73mm bore against your intended fitment.

Listed on Amazon as: Enkei RPF Silver Wheel (18×8"/5x112mm)

#8

8. Enkei EKM3

• Material: Aluminum
• Compatible with Vehicle Type: Cruiser
• Wheel Size: 18 in

Best for: 18-inch Enkei fitment shoppers.

Why it ranks #8: The 18×8 aluminum wheel lists a 45 mm offset and 72.6 mm bore, but its supplied details do not identify a deep-dish profile.

The Enkei EKM3 pairs an 18×8-inch size with a 5×112 bolt pattern and 45mm offset, giving buyers concrete fitment dimensions to compare against a vehicle’s requirements. Its 72.6mm bore and aluminum construction add further specifications for planning a wheel change, while the Hyper Silver finish supplies a defined appearance.

The 18×8 size and 45mm offset help narrow fitment choices, while the 5×112 bolt pattern identifies the mounting pattern to match. A 72.6mm bore is another key measurement for checking wheel-to-hub compatibility. Because the wheel is aluminum, it has a specified material rather than an unspecified construction. Hyper Silver gives the setup a silver finish, and the 18-inch diameter keeps the choice focused on buyers seeking that particular wheel size.

Skip it if you need a different diameter or width; this listing specifies an 18×8-inch wheel.

Choose this Enkei if your setup calls for an 18×8 wheel with 5×112 fitment, 45mm offset, and a 72.6mm bore. Its dimensions are specific, so compare them with your vehicle’s wheel requirements before choosing.

Listed on Amazon as: 18×8 Enkei EKM3 (Hyper Silver) Wheels/Rims 5×112 (442-880-4445HS)

#9

9. Motegi MR116 FS5

• Material: Aluminum
• Compatible with Vehicle Type: Passenger Car, SUV, Truck, Van
• Wheel Size: 16 in

Best for: Dual-pattern 16-inch wheel seekers.

Why it ranks #9: It specifies a 16×7 size, 40 mm offset, and 5×112 fitment, but its narrower width and lack of a stated lip profile weaken the match.

The Motegi MR116 FS5 lists a 16×7 size with a 40mm offset and a combined 5×112/4.5 bolt-pattern specification, offering buyers two pattern details to check against their vehicle. Its gloss-black finish with a machined flange gives the wheel a defined contrast, and the listing includes a center cap.

The 16×7 size and 40mm offset help buyers compare the MR116 with their fitment needs, while its 5×112/4.5 specification gives two listed bolt-pattern options to evaluate. The gloss-black finish and machined flange define its appearance. The product lists passenger cars, SUVs, trucks, and vans among compatible vehicle types, though the specific vehicle fit still depends on the listed dimensions. A center cap is included, and a replacement cap part number is supplied in the product details.

Skip it if you need a wheel larger than 16 inches; this Motegi listing specifies a 16×7 size.

The MR116 suits buyers considering a 16×7 wheel with a 40mm offset and a listed 5×112/4.5 pattern. Its machined flange and included center cap add useful details; verify the pattern and dimensions for your application.

Listed on Amazon as: Motegi MR116 FS5 16X7 5X112/4.5 5.57 40mm GLOSS BLACK W/MACHINED FLANGE – MR11667046340

#10

10. Vision 469 Boost

• Material: satin
• Compatible with Vehicle Type: Passenger Car
• Wheel Size: 16 in

Best for: Satin-black 16-inch buyers.

Why it ranks #10: The 16×7 wheel has a 5×112 pattern, +38 mm offset, and 73.1 mm hub bore, but no deep-dish profile is stated.

The Vision 469 Boost measures 16×7 inches and uses a 5×112 pattern with a +38mm offset, giving buyers clear dimensions for a smaller-wheel fitment comparison. Its listed 73.1mm hub bore and 5.5-inch backspacing add useful geometry details, while the satin-black finish sets the visual direction.

The 16×7 size, 5×112 pattern, and +38mm offset provide core figures for checking this wheel against a vehicle’s requirements. The 73.1mm hub bore and 5.5-inch backspacing add further measurements to that assessment. Vision lists a satin-black finish, so the appearance is clearly defined. The item is specified as quantity one, which matters when planning a complete set: buyers should account for the listed unit quantity rather than assume multiple wheels are included.

Skip it if you need a complete set in one listing; this item is specified as quantity one.

This Vision suits buyers seeking a satin-black 16×7 wheel with 5×112 fitment and +38mm offset. Its bore and backspacing are also specified; account for the single-item quantity when planning a full vehicle set.

Listed on Amazon as: Vision 469 Boost 16×7 5×112 +38mm Satin Black Wheel Rim 16" Inch