A strong 6000 lb trailer axle choice matches your trailer’s hub-face and spring-center measurements, and includes the running gear you actually need. The labwork 6000 lb 85/70 axle leads this roundup with a stated 6,000 lb capacity, 85-inch hub face, 70-inch spring center, and included hub kit. Other picks cover dimensions from 73/58 to 95/80 inches, plus beam-only replacements and a complete suspension kit.
These are not interchangeable just because they share a capacity rating: dimensions, brake equipment, and whether hubs or bearings are supplied all affect fit and installation. Measure the existing setup before ordering, then compare the product details against your trailer’s axle, wheel, and brake requirements.
This guide ranks all 10 options by fit information and included components.
The labwork 6000 lb 85/70 axle is the Best 6000 lb Trailer Axle pick for buyers whose trailer measures 85 inches hub face and 70 inches spring center. It states a 6,000 lb capacity, includes a hub kit, and lists preinstalled bearings, a 3-inch tube, and 6.3 mm wall thickness. It does not include brakes, so confirm your brake requirements and measurements before purchase.
Its dimensions—not capacity alone—are the reason it leads.
Our Top Picks

Its 6,000 lb capacity, 85-inch hub face, and 70-inch spring center are clearly stated, and the axle includes a hub kit with preinstalled bearings.
View on Amazon
Longer FitThis complete axle-and-hub option states 89-inch hub face and 74-inch spring center, plus a 6,000 lb rating and preinstalled bearings.
View on Amazon
Longest Complete FitThe 95-inch hub face and 80-inch spring center suit a wider measured fit; it includes a hub kit and lists a 6,000 lb capacity.
View on Amazon- Wired Axle Trailer Parts Outlet 73/58 Axle
- Specific Measurements Dawselod 87.17/69.29 Axle
Compare axle dimensions, components, and fit
| # | Product | Dimensions | Weight | Voltage | Buy |
|---|---|---|---|---|---|
| 1 | 1. labwork 85/70 AxleBest Overall | 91.54 x 8.07 x 7.87 in | 87.7 lb | 521 V | View on Amazon |
| 2 | 2. labwork 89/74 AxleLonger Fit | 95.28 x 7.87 x 7.87 in | 94.8 lb | 381 V | View on Amazon |
| 3 | 3. labwork 95/80 AxleLongest Complete Fit | 101.18 x 8.07 x 7.87 in | 98.1 lb | 844 V | View on Amazon |
| 4 | 4. Trailer Parts Outlet 73/58 AxleWired Axle | — | 72 lb | — | View on Amazon |
| 5 | 5. labwork 95/80 Beam95-inch beam-only replacement | 100.98 x 5.71 x 5.91 in | 65.3 lb | 579 V | View on Amazon |
| 6 | 6. Dawselod 87.17/69.29 AxleSpecific Measurements | — | — | — | View on Amazon |
| 7 | 7. Thomletha 89/74 Beam89-inch beam replacement | 94.49 x 5.91 x 5.51 in | 61.3 lb | — | View on Amazon |
| 8 | 8. Thomletha 73/58 BeamCompact beam with wiring | 78.74 x 5.91 x 5.51 in | 52.2 lb | 705 V | View on Amazon |
| 9 | 9. GXYWADY 95/80 BeamCustom beam replacement | 100.98 x 5.71 x 5.91 in | 65.3 lb | 386 V | View on Amazon |
| 10 | 10. Trailer Parts Outlet Drop KitDrop axle suspension kit | — | 180 lb | — | View on Amazon |
Detailed Reviews: Best 6000 lb Trailer Axle

#1 · Best Overall
1. labwork 85/70 Axle
- Dimensions: 91.54 x 8.07 x 7.87 in
- Weight: 87.7 lb
- Voltage: 521 V
Best for: 85-inch hub-face replacement.
Why it ranks #1: Its 6,000 lb capacity, 85-inch hub face, and 70-inch spring center are clearly stated, and the axle includes a hub kit with preinstalled bearings.
An 85-inch hub face paired with a 70-inch spring center gives this 6,000-pound labwork axle a specific fit for trailers using those mounting measurements. It comes with a hub kit, preinstalled shaft seat and bearings, so buyers replacing a complete axle can start with key running-gear components already assembled.
The 3-inch straight steel tube has a 6.3mm wall and powder-coated finish, providing a substantial axle structure with a protective coating. Its 6-lug hubs use inner 25580 and outer 15123 bearings, and the supplied bearings are preinstalled and greased, which reduces assembly work compared with a bare beam. The 85-inch hub face and 70-inch spring center are the critical fit dimensions; this axle is rated for 6,000 pounds and does not have brakes.
- 6,000-pound capacity
- 85-inch hub face and 70-inch spring center
- Hub kit with preinstalled, greased bearings
- 3-inch tube with 6.3mm wall and powder coating
- No brakes are included, so it does not provide a brake-equipped axle assembly.
Skip it if you need an 89-inch hub face or 74-inch spring center; the labwork B0FJBR4DPX has those dimensions.
This suits a trailer owner replacing a 6,000-pound axle with an 85-inch hub face and 70-inch spring center who wants hubs and greased bearings included. Its lack of brakes makes it a poor match for a brake-equipped replacement.
Full product details
| Brand | labwork |
|---|---|
| Item Weight | 87.7 pounds |
| Item model number | Does not apply |
| Manufacturer | labwork |
| Part Number | 1-6090885-436982 |
| Dimensions | 91.54 x 8.07 x 7.87 inches |
| Special Features | Stemless |
| Voltage | 521 volts |
Listed on Amazon as: labwork 6000Lbs 6 Lug Trailer Axle 85 Inch Hub Face 70 Inch Spring Center
View on Amazon
#2 · Longer Fit
2. labwork 89/74 Axle
- Dimensions: 95.28 x 7.87 x 7.87 in
- Weight: 94.8 lb
- Voltage: 381 V
Best for: 89-inch hub-face replacement.
Why it ranks #2: This complete axle-and-hub option states 89-inch hub face and 74-inch spring center, plus a 6,000 lb rating and preinstalled bearings.
The 89-inch hub face and 74-inch spring center make this labwork axle a targeted replacement for trailers that use those wider measurements. Its 6,000-pound rating and included hub kit give owners a complete axle assembly with preinstalled, greased bearings, while the brake-free configuration suits setups that do not call for brakes on the axle.
A 3-inch straight steel tube with 6.3mm wall thickness forms the axle beam, and its powder coating provides a protective exterior. The supplied hub kit uses 6-lug hubs with inner 25580 and outer 15123 bearings; those bearings are preinstalled and greased, helping reduce setup work. Measure both the 89-inch hub face and 74-inch spring center against the trailer before selecting it. This axle is rated for 6,000 pounds and is supplied without brakes.
- 6,000-pound capacity
- 89-inch hub face and 74-inch spring center
- Hub kit with preinstalled, greased bearings
- Powder-coated 3-inch tube with 6.3mm wall
- It has no brakes, so a brake-equipped axle is needed when the trailer setup requires them.
Skip it if you need an 85-inch hub face and 70-inch spring center; the labwork B0FJBXN63S matches those measurements.
Choose this for a 6,000-pound trailer whose measured hub face is 89 inches and spring center is 74 inches, especially when a hub kit is useful. Its brake-free configuration is a boundary for brake-equipped builds.
Full product details
| Brand | labwork |
|---|---|
| Item Weight | 94.8 pounds |
| Item model number | Does not apply |
| Manufacturer | labwork |
| Part Number | 1-6952686-418607 |
| Dimensions | 95.28 x 7.87 x 7.87 inches |
| Special Features | Stemless |
| Voltage | 381 volts |
Listed on Amazon as: labwork 6000Lbs 6 Lug Trailer Axle 89 Inch Hub Face 74 Inch Spring Center
View on Amazon
#3 · Longest Complete Fit
3. labwork 95/80 Axle
- Dimensions: 101.18 x 8.07 x 7.87 in
- Weight: 98.1 lb
- Voltage: 844 V
Best for: 95-inch complete axle fit.
Why it ranks #3: The 95-inch hub face and 80-inch spring center suit a wider measured fit; it includes a hub kit and lists a 6,000 lb capacity.
A 95-inch hub face and 80-inch spring center give this labwork 6,000-pound axle a specific fit for wider trailer layouts. Unlike a beam-only replacement, it includes a hub kit with preinstalled, greased bearings, helping buyers replace the axle and hubs together while keeping the brake-free configuration in mind.
The 3-inch straight steel tube has a 6.3mm wall and powder coating, combining a sturdy beam specification with exterior protection. The included 6-lug hub kit uses inner 25580 and outer 15123 bearings, which are preinstalled and greased to reduce bearing setup work. Its 95-inch hub face and 80-inch spring center are the key installation measurements to match. Rated for 6,000 pounds, this axle does not include brakes, so braking needs must be handled separately.
- 6,000-pound capacity
- 95-inch hub face and 80-inch spring center
- Hub kit with preinstalled, greased bearings
- Powder-coated 3-inch tube with 6.3mm wall
- No brakes are included, so it cannot replace a brake-equipped axle without separate brake provisions.
Skip it if you need a bare beam to choose your own hubs; the labwork B0FHQ3DH5K is a beam-only 95/80-inch option.
This is for owners replacing a complete 6,000-pound axle on a trailer measured for 95-inch hub face and 80-inch spring center spacing. The included hubs and bearings simplify the parts list, but the brake-free setup is a key boundary.
Full product details
| Brand | labwork |
|---|---|
| Item Weight | 98.1 pounds |
| Item model number | Does not apply |
| Manufacturer | labwork |
| Part Number | 1-6034900-898218 |
| Dimensions | 101.18 x 8.07 x 7.87 inches |
| Special Features | Stemless |
| Voltage | 844 volts |
Listed on Amazon as: labwork 6000Lbs 6 Lug Trailer Axle 95 Inch Hub Face 80 Inch Spring Center
View on Amazon
#4 · Wired Axle
4. Trailer Parts Outlet 73/58 Axle
- Weight: 72 lb
Best for: 73-inch TK axle replacement.
Why it ranks #4: A complete 6,000 lb axle with 73-inch hub face, 58-inch spring center, 6×5.5 bolt pattern, and stated internal wiring.
A 73-inch hub face and 58-inch spring center set this 6,000-pound TK axle apart for trailers using that compact spacing. The 6×5.5 bolt pattern and included bearing kit and 6-lug hubs make it more than a bare beam, while internal wiring protects the wires from wear and tear for a seamless design.
The 3-inch high-strength straight steel tube provides the axle structure, and the included internal wiring is protected within the design rather than exposed along the beam. Its 6×5.5 bolt pattern, 6-lug hubs, and bearing kit rated for 5,200–6,000 pounds help define the running-gear compatibility. Measure the 73-inch hub face and 58-inch spring center against the trailer’s existing layout; those dimensions determine whether it can replace the current axle without changing the mounting arrangement.
- 6,000-pound axle capacity
- 73-inch hub face and 58-inch spring center
- 6×5.5 bolt pattern with 6-lug hubs
- Bearing kit and internally protected wiring
- The 73-inch hub face and 58-inch spring center restrict it to trailers using that spacing.
Skip it if you need 85-inch hub face and 70-inch spring center measurements; the labwork B0FJBXN63S uses that larger layout.
This is a fit-focused option for buyers replacing a TK axle on a trailer measured for 73-inch hub face and 58-inch spring center spacing. Its 6×5.5 pattern and included running gear still need to match the existing setup.
Full product details
| Brand | The Trailer Parts Outlet |
|---|---|
| Item Weight | 72 pounds |
| Manufacturer | TK Trailer Parts |
| Part Number | 06IDTK7358655 |
Listed on Amazon as: 6k TK Trailer Axle, 73" Hubface 58" Spring Center, 6×5.5 Bolt Pattern
View on Amazon
#5
5. labwork 95/80 Beam
- Dimensions: 100.98 x 5.71 x 5.91 in
- Weight: 65.3 lb
- Voltage: 579 V
Best for: 95-inch beam-only replacement.
Why it ranks #5: The beam-only design states a 95-inch hub face, 80-inch spring center, 5-bolt brake flange, and internal wiring for electric brakes.
A 95-inch hub face and 80-inch spring center define this labwork 6,000-pound beam-only axle for trailers with that wider geometry. Its 5-bolt brake-flange configuration and internal wiring support builds using electric brakes, while the beam-only format lets owners select the hubs and other running gear themselves.
The straight steel tube measures 3 inches in diameter with a 6.3mm wall, and its powder-coated finish provides a protective surface. A 5-bolt brake-flange configuration and internal wiring support connection to electric brakes, making the beam relevant to brake-equipped custom replacements. The 95-inch hub face and 80-inch spring center set the wheel and suspension spacing. The package lists injection nozzles, gaskets, spindle nuts and cotter pins, but it is an axle beam rather than a complete hub assembly.
- 6,000-pound capacity
- 95-inch hub face and 80-inch spring center
- Internal wiring for connection to electric brakes
- 5-bolt brake flange and 3-inch, 6.3mm-wall tube
- Beam only; wheel hubs and bearings are not included.
Skip it if you want a hub kit and preinstalled, greased bearings; the labwork B0FJBFTCQ9 includes those components.
This works for a trailer owner matching 95-inch hub-face and 80-inch spring-center measurements who wants a beam with brake wiring and flange provisions. Allow for sourcing compatible hubs and bearings before completing the axle assembly.
Full product details
| Brand | labwork |
|---|---|
| Item Weight | 65.3 pounds |
| Item model number | Does not apply |
| Manufacturer | labwork |
| Part Number | 1-6934404-774339 |
| Dimensions | 100.98 x 5.71 x 5.91 inches |
| Special Features | Stemless |
| Voltage | 579 volts |
Listed on Amazon as: labwork 6000lb Beam Only Trailer Axle 95 Inch Hub Face
View on AmazonWhy it ranks #6: It lists exact 87.17-inch hub-face and 69.29-inch spring-center dimensions, plus a 6×5.5 bolt pattern and high-strength steel tube.
A 6×5.5 bolt pattern and 87.17-inch hub face define this Dawselod 6,000-pound trailer axle, helping buyers match its wheel mounting and overall width to a trailer. The 69.29-inch spring center adds another precise fit measurement, while the stated high-strength steel tube and powder coating address structure and exterior protection.
The 87.17-inch hub-face measurement is taken between the bottoms of the wheel studs, while the 69.29-inch spring center measures between spring-seat centers; matching both helps avoid choosing an axle with unsuitable wheel or suspension spacing. Its 6×5.5 bolt pattern identifies the wheel interface. Dawselod describes a high-strength steel tube intended to support uniform tire wear and a powder coating for protection against the elements. The listing gives a 6,000-pound capacity, but offers limited assembly detail.
- 6,000-pound capacity
- 6×5.5 bolt pattern
- 87.17-inch hub face and 69.29-inch spring center
- Powder-coated high-strength steel axle tube
- Its 87.17-inch hub face and 69.29-inch spring center make it a narrow fit for trailers using other dimensions.
Skip it if you need a 73-inch hub face and 58-inch spring center; The Trailer Parts Outlet 6k TK Trailer Axle uses those dimensions.
This fits buyers whose trailer measurements call for a 6×5.5 pattern, 87.17-inch hub face and 69.29-inch spring center. The stated 6,000-pound capacity is useful, but the precise geometry makes measurement matching essential.
Full product details
| Brand | Dawselod |
|---|---|
| Item model number | 1 |
| Manufacturer | Dawselod |
| Part Number | 1 |
| Model | 1 |
Listed on Amazon as: 6000 lbs Trailer Axle – 6×5.5 Lug Bolt Pattern – 87.17" Hubface 69.29" Spring Center, Suitable for Trailers, Freight Vehicles, RVs, Campers, etc (6×5.5 Bolt Pattern, 87.17"/69.29")
View on Amazon
#7
7. Thomletha 89/74 Beam
- Dimensions: 94.49 x 5.91 x 5.51 in
- Weight: 61.3 lb
Best for: 89-inch beam replacement.
Why it ranks #7: This beam-only axle states 6,000 lb capacity, 89-inch hub face, 74-inch spring center, and a 5-bolt brake flange.
An 89-inch hub face and 74-inch spring center give this Thomletha 6,000-pound axle beam a clear fit profile for light trailers. Its 5-bolt brake-flange configuration and supplied grease-service parts support a component-based replacement, while the beam-only format leaves buyers responsible for sourcing compatible running gear.
The 3-inch tube has a 6.3mm wall and a 5-bolt brake-flange configuration, providing a defined beam and brake-mounting interface. The 89-inch hub face and 74-inch spring center establish wheel and suspension spacing for trailers such as boat, car, ATV and cargo trailers. The package lists injection nozzles, gaskets, spindle nuts and cotter pins; its lube feature lets owners grease the axle without removing the whole assembly. Hubs and bearings are not listed as included.
- 6,000-pound capacity
- 89-inch hub face and 74-inch spring center
- 5-bolt brake-flange configuration
- Grease service without removing the whole assembly
- Hubs and bearings are not listed as included, so this is not a complete hub-equipped axle.
Skip it if you need a 73-inch hub face and 58-inch spring center; the Thomletha B0FHC99SNS uses those dimensions.
This suits a light-trailer owner replacing a beam with 89-inch hub-face and 74-inch spring-center measurements who values grease access. Plan to provide compatible hubs and bearings, since the listing describes a beam rather than a complete running-gear assembly.
Full product details
| Brand | Thomletha |
|---|---|
| Item Weight | 61.3 pounds |
| Item model number | Does not apply |
| Manufacturer | Thomletha |
| Part Number | MO-1766894-603282-AT |
| Model | 6000lbs Trailer Axle Only Beam |
| Dimensions | 94.49 x 5.91 x 5.51 inches |
Listed on Amazon as: Trailer Axle Only Beam with Idler 89 Hub Face 74 Spring Center
View on Amazon
#8
8. Thomletha 73/58 Beam
- Dimensions: 78.74 x 5.91 x 5.51 in
- Weight: 52.2 lb
- Voltage: 705 V
Best for: Compact beam with wiring.
Why it ranks #8: The 73-inch hub face and 58-inch spring center provide a compact beam-only option; its listing specifies a 3-inch tube and 6.3 mm wall.
A 73-inch hub face and 58-inch spring center make this Thomletha axle beam a measured-fit option for smaller light trailers. It is rated for 6,000 pounds and has pre-embedded wires that can connect to electric brakes, an unusual practical detail for a beam-only replacement that requires separate running-gear components.
The 3-inch tube has a 6.3mm wall, and the stated 73-inch hub face and 58-inch spring center define wheel and suspension placement. Pre-embedded wires can connect to electric brakes, supporting an electrically wired brake setup without relying on exposed beam wiring. The package includes injection nozzles, gaskets, spindle nuts and cotter pins. However, the listing explicitly says the axle is supplied without brake discs, wheel hubs or bearings, so those components must be sourced for installation.
- 6,000-pound capacity
- 73-inch hub face and 58-inch spring center
- Pre-embedded wires connect to electric brakes
- Includes injection nozzles, gaskets, spindle nuts and cotter pins
- Brake discs, wheel hubs and bearings are not included.
Skip it if you need an 89-inch hub face and 74-inch spring center; the Thomletha B0DZMWPNS6 has that wider spacing.
Consider this beam for a light trailer measured for 73-inch hub-face and 58-inch spring-center spacing, particularly when electric-brake wiring is part of the plan. It is not a complete axle assembly, so hubs, bearings and brake discs remain separate requirements.
Full product details
| Brand | Thomletha |
|---|---|
| Item Weight | 52.2 pounds |
| Item model number | Does not apply |
| Manufacturer | Thomletha |
| Part Number | MO-1857395-518512-AT |
| Dimensions | 78.74 x 5.91 x 5.51 inches |
| Special Features | Stemless |
| Voltage | 705 volts |
Listed on Amazon as: Axle Only Beam with Idler 73 Inch Hub Face 58 Inch Spring Center
View on Amazon
#9
9. GXYWADY 95/80 Beam
- Dimensions: 100.98 x 5.71 x 5.91 in
- Weight: 65.3 lb
- Voltage: 386 V
Best for: Custom beam replacement.
Why it ranks #9: This 6,000 lb beam-only replacement lists a 95-inch hub face, 80-inch spring center, and 5-bolt brake flange, but supplies no hubs or bearings.
A 95-inch hub face and 80-inch spring center give this GXYWADY axle beam a defined fit for light-duty trailer replacements. It is a 6,000-pound beam-only component, not a ready-to-install hub assembly, so buyers can select compatible hubs, bearings and braking parts for their own build or repair plan.
The 3-inch pipe has a 6.3mm wall and a 5-bolt brake-flange configuration, giving a builder mounting points for compatible braking hardware. Its 95-inch hub face and 80-inch spring center set the wheel and suspension geometry, while the 6,000-pound capacity is specified for light-duty trailer use. Because this is an axle beam only, the supplied facts specify no brake discs, hubs or bearings; buyers must source and match those components separately before assembly.
- 6,000-pound capacity
- 95-inch hub face and 80-inch spring center
- 3-inch pipe with 6.3mm wall
- 5-bolt brake-flange configuration
- Beam only; brake discs, hubs and bearings are not included.
Skip it if you want hubs and greased bearings included; the labwork B0FJBFTCQ9 is a complete axle with a hub kit.
This beam suits trailer builders or repairers who need 95-inch hub-face and 80-inch spring-center geometry and want to choose their own running gear. Factor in sourcing compatible hubs, bearings and brake components separately.
Full product details
| Brand | GXYWADY |
|---|---|
| Item Weight | 65.3 pounds |
| Item model number | Does not apply |
| Manufacturer | GXYWADY |
| Part Number | DY-9901676-616941-GX |
| Dimensions | 100.98 x 5.71 x 5.91 inches |
| Special Features | Stemless |
| Voltage | 386 volts |
Listed on Amazon as: GXYWADY 6000lbs Trailer Axle Only Beam Replacement for Light Duty Trailers
View on AmazonWhy it ranks #10: It includes a 6,000 lb 4-inch drop electric-brake axle, springs, U-bolt kits, and hanger kit, but its 85/00 loose-seat fit is specialized.
A 4-inch drop axle arrives here as a 6,000-pound single-axle kit with electric drum brakes, springs, U-bolts and hangers. That bundled running gear can streamline a suspension replacement compared with sourcing each component separately, while the loose spring seats require welding and the axle is explicitly not ABS compatible.
The kit combines a 6×5.5-pattern electric drum-brake axle with two 3,000-pound, 25.25-inch, five-leaf double-eye springs, a 6,000-pound U-bolt kit and a double-eye hanger kit. Having these suspension pieces packaged together supports a coordinated single-axle installation. The standard 4-inch drop defines its axle profile, but the spring seats are loose and must be welded on, so installation involves welding work. The listing also states that the axle is not ABS compatible.
- 6,000-pound single-axle kit
- Electric drum brakes and 6×5.5 bolt pattern
- Includes springs, U-bolts and hanger kit
- 4-inch drop axle with EZ Lube design
- Loose spring seats must be welded on, and the axle is not ABS compatible.
Skip it if you need ABS compatibility; the listing explicitly excludes it, so this kit does not meet that requirement.
This kit fits a buyer replacing a single-axle suspension who wants brakes, springs, U-bolts and hangers bundled together. It requires welding the loose spring seats and is not suitable for an ABS-compatible trailer.
Full product details
| Brand | The Trailer Parts Outlet |
|---|---|
| Item Weight | 180 pounds |
| Manufacturer | The Trailer Parts Outlet |
| Part Number | 06SHDAKTTK-DROPST8500655 |
Listed on Amazon as: 6000 lb Single Axle TK Trailer Kit with Suspension – 6k Capacity (Drop Axle Series), 85/00 (Loose Spring Seats)
View on AmazonAxle fit is more than hub-face length
Matching hub-face length alone does not establish that an axle will fit your trailer. Spring-center spacing also has to match the suspension, and the listed products show why both measurements matter: options range from 73/58 inches to 95/80 inches, while the Dawselod axle lists the less-common 87.17/69.29-inch combination. A mismatch can prevent the spring seats from aligning with the suspension, even if the hubs appear to reach the wheels.
Measure hub face from the hub face where the studs emerge to the opposite hub face, and measure spring center from the center of one spring seat to the other. Also check the bolt pattern and brake arrangement.
For example, several complete options specify a 6×5.5 pattern, while beam-only products may require you to confirm that your existing hubs and related parts match. Treat each measurement as a separate fit requirement, not an approximate size.
Beam-only axles leave parts decisions to you
A beam-only axle is appropriate when you intend to reuse or separately source compatible running gear; it is not equivalent to a complete axle with hubs. The GXYWADY listing explicitly says it is a shaft only without brake discs, hubs, or bearings. The Thomletha beam listings likewise say the axle is only a beam, though the 89/74 version lists service hardware such as spindle nuts and cotter pins.
In contrast, the labwork 85/70, 89/74, and 95/80 products include a hub kit and state that bearings are preinstalled, but explicitly do not include brakes. The Trailer Parts Outlet 73/58 axle specifies internal wiring, while its listing does not establish that brakes are included.
Check the package contents against what you plan to reuse, and verify brake flange, hubs, bearings, wiring, and wheel pattern before treating a beam replacement as a ready-to-install axle.
How to Choose a 6000 lb Trailer Axle
Hub-face and spring-center dimensions
Look for an axle whose hub-face and spring-center measurements match your trailer, rather than choosing by capacity alone. The listed options span 73/58 inches, 85/70 inches, 87.17/69.29 inches, 89/74 inches, and 95/80 inches. A compact existing setup may point to the 73/58 choices, while a wider trailer may require one of the 95/80 options; the exact measurements on your trailer decide which end of the range applies.
The Dawselod listing offers a precise 87.17/69.29-inch combination for buyers whose measured setup calls for those dimensions. Measure both locations carefully before ordering, and do not assume that close-looking sizes will align with spring seats or wheels.
Complete axle or beam-only replacement
Choose based on whether you need hubs and bearings supplied or plan to reuse compatible components. The labwork 85/70, 89/74, and 95/80 axles include a hub kit and list preinstalled bearings, while the GXYWADY product explicitly excludes hubs, bearings, and brake discs. Thomletha offers beam-only options at 89/74 and 73/58 inches.
A buyer replacing a complete axle assembly may prefer a hub-kit model; someone replacing only a damaged beam may favor a beam-only design, provided the existing parts fit. The Trailer Parts Outlet 73/58 axle specifies a 6×5.5 pattern and internal wiring, but confirm exactly which brake components are included.
Compare package contents, not just the product title, before deciding.
Brake and suspension configuration
Check whether the axle’s brake and suspension setup matches the trailer’s current system and planned installation. Most listed complete labwork axles explicitly do not have brakes, whereas the Trailer Parts Outlet 73/58 listing notes internal wiring and the drop kit includes a 6,000 lb electric drum-brake axle. That kit also includes springs, U-bolt kits, and a hanger kit, but has a 4-inch drop and loose spring seats that need welding.
The beam-only listings vary too: several state a 5-bolt brake flange, and labwork’s 95/80 beam says it has internal wiring for electric brakes. Buyers retaining existing brakes should verify flange and component compatibility; buyers seeking a more assembled suspension package should examine the drop kit’s special configuration.
Which 6000 lb trailer axle should I choose?
Choose the labwork 85/70 Axle if your trailer measures 85 inches hub face and 70 inches spring center and you want a stated hub kit with preinstalled bearings. For a measured 89/74 setup, the labwork 89/74 Axle offers the same 6,000 lb capacity and included hub kit. If you need 95/80 dimensions with hubs, select the labwork 95/80 Axle; if you need only a wired beam at those dimensions, the labwork 95/80 Beam is the relevant alternative.
The Trailer Parts Outlet 73/58 Axle suits a matching compact setup and specifies internal wiring. Choose the Trailer Parts Outlet Drop Kit only if its 4-inch drop, loose spring seats, and included suspension parts match your installation.
Confirm brakes and bolt pattern separately.
Related Buying Guides
Frequently Asked Questions
How do I measure hub face and spring center on my existing trailer axle?
Measure hub face from the outer mounting face of one hub to the outer mounting face of the other. Measure spring center between the centers of the two spring seats. Record both measurements in inches and compare them with the replacement axle listing; matching capacity alone does not confirm fit.
Do I need to replace or add brakes when changing a 6000 lb axle?
Check your trailer’s brake requirements and the replacement axle’s included components before ordering. The leading 85/70 axle in this roundup does not include brakes, so brake needs must be confirmed separately. Also verify that the brake arrangement and related fitment match your trailer rather than assuming they are included.
Can I use a beam-only axle with my existing hubs, bearings, and suspension?
Possibly, but confirm compatibility before choosing a beam-only axle. Match its hub-face and spring-center dimensions to your trailer, then verify that your hubs, bearings, and suspension interfaces fit the beam. The product titles identify beam-only options, but do not establish that existing components will transfer.
How should I verify the bolt pattern before choosing an axle?
Compare the axle’s stated bolt pattern with the pattern required by your wheels and hubs. Some listings specify 6×5.5, while others do not state a pattern in the title. Confirm the pattern for the exact axle and any included hub kit; do not infer it from capacity or dimensions.
When is a drop axle kit the right choice?
Choose a drop kit only when its design and included parts suit your installation. The Trailer Parts Outlet Drop Kit is identified with a 4-inch drop, loose spring seats, and suspension parts. Confirm those features match your trailer’s measurements and suspension setup before selecting it over a standard axle.
Final Words
Start with your trailer’s measured hub-face and spring-center dimensions, then compare included components and confirm brake needs and bolt pattern separately. The labwork 85/70 axle is the leading choice only for a matching 85/70 setup that needs its stated hub kit and preinstalled bearings. For other dimensions, choose the corresponding listed axle or beam; consider the drop kit only if its drop and suspension parts fit your installation.



