Best 7 8 10 Inch Ape Hangers for Custom Motorcycle Builds

#1 · Best Overall

1. CELOMT 10-Inch Ape Hanger

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 10"L x 29.5"W

Best for: 10-inch rise, 7/8-inch clamps.

Why it ranks #1: Its listing specifies a 10-inch rise, 7/8-inch diameter, 29.5-inch width, and 10.8-inch pullback for a well-defined fit check.

A 10-inch rise paired with 10.8 inches of pullback gives this CELOMT bar a tall, rearward-leaning layout for riders seeking an ape-hanger position. Its 7/8-inch diameter is the key fit detail: it suits a motorcycle riser clamp of that diameter, while the 29.5-inch width sets the bar’s overall span.

The alloy-steel construction and matte-black finish provide a straightforward replacement-bar setup, while the 10-inch rise establishes the taller hand position. Its 10.8-inch pullback and 10-inch center width are useful measurements to compare with the rider’s preferred reach and the motorcycle’s riser area before installation. The listed 7/8-inch handlebar diameter makes clamp compatibility especially important; this is not a universal fit across differently sized clamps. The package includes one handlebar.

Skip it if you need a 1-inch clamp fit; Lexoro’s 8-inch bar specifies a 1-inch clamp and tube diameter.

Choose this CELOMT bar if your motorcycle uses a 7/8-inch riser clamp and you want a 10-inch rise with substantial pullback. Its 29.5-inch width and reach measurements still need to suit your riding position and setup.

Listed on Amazon as: 7/8'' Ape Hanger Handlebars (Matted Black, 10 inch)

#2 · Best Detailed Dimensions

2. AIRCMT 10-Inch Ape Hanger

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 28.5"L x 28.5"W

Best for: Chrome 7/8-inch clamp setup.

Why it ranks #2: This 7/8-inch bar lists a 10-inch rise, 8-inch pullback, 28.5-inch width, 2.2mm tube thickness, and included housing.

A 10-inch rise, 8-inch pullback, and chrome-plated seamless-steel tube give the AIRCMT bar a defined combination of height, reach, and finish. Its 7/8-inch diameter targets matching handlebar clamps, while the 28.5-inch width and 3-1/2-inch knurled-center spacing provide practical dimensions for checking the mounting area.

The seamless steel tube has a listed 2.2 mm thickness, and its integrated construction is paired with a polished, chrome-plated surface; those details describe both the bar’s material build and finish. A 10-inch rise with 8 inches of pullback sets the hand position, while the 28.5-inch width helps assess overall span. AIRCMT lists compatibility with 7/8-inch mounting clamps and names Harley Chopper, Bobber, Street, XG500, and XG750 applications, but clamp size still matters.

Skip it if you need internal wiring provisions; Lexoro’s HDHBAR03-1-1-8GB is pre-drilled and internally deburred.

Pick this AIRCMT bar for a chrome 10-inch-rise setup using a 7/8-inch clamp, especially when its 8-inch pullback and 28.5-inch width suit your reach. Check the named mounting dimensions against your motorcycle before fitting.

Listed on Amazon as: 10’’ Rise 7/8'' Ape Hanger Handlebar High-Rise Drag Bar For Harley Chopper Bobber Motorcycle Street XG500 XG750,Mini Ape Hanger Handle Bars

#3 · Best Chrome Option

3. CELOMT 8-Inch Chrome Bar

• Dimensions: 29.5"L x 8"W

Best for: Chrome 8-inch, 7/8-inch bar.

Why it ranks #3: The 8-inch, 7/8-inch steel bar lists a 29.5-inch width and 10.8-inch pullback, making its main fit dimensions clear.

An 8-inch rise and 10.8-inch pullback give this CELOMT bar a tall, rearward reach in a chrome finish. The 7/8-inch diameter is the crucial fit specification for its intended clamp, while its 29.5-inch width makes it useful to compare against the space and hand position available on a Bobber, Brat, Cafe, or Chopper-style build.

The steel construction and chrome finish offer a simple replacement-bar format, while the 8-inch rise defines its height. A 10.8-inch pullback adds substantial listed rearward reach, and the 10-inch center width gives another measurement to compare with the motorcycle’s riser area. Its 7/8-inch diameter calls for a matching riser clamp; the listed compatibility language does not replace checking that dimension. The package includes one handlebar, so other installation components are not specified as included.

Skip it if you need a 1-inch clamp and internal wiring provisions; Lexoro’s HDHBAR03-1-1-8GB lists both.

Choose this CELOMT bar for a chrome 8-inch-rise look when your riser clamp measures 7/8 inch and its 10.8-inch pullback suits your reach. Its dimensions should guide fit checks, especially on a custom motorcycle.

Listed on Amazon as: 7/8'' Drag Ape Hanger Handlebar Fit Bobber Brat Cafe Chopper Custom Motorcycles Harley Sportster Chrome (8 inch)

#4

4. CELOMT 8-Inch Black Bar

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 29.5"L x 8"W

Best for: Black iron 8-inch replacement.

Why it ranks #4: This 7/8-inch, 8-inch-rise iron bar shares the listed 29.5-inch width and 10.8-inch pullback and has a gloss-black finish.

An 8-inch rise, 10.8-inch pullback, and gloss-black iron finish define this CELOMT handlebar’s straightforward ape-hanger setup. Its 7/8-inch diameter is the central compatibility detail, while the 29.5-inch width and 10-inch center width give buyers measurements to compare with their motorcycle’s risers and preferred reach.

The listed iron construction, also identified as alloy steel in specifications, is paired with a gloss-black finish for a simple replacement-bar appearance. An 8-inch rise establishes the bar height, while 10.8 inches of pullback describes its rearward reach; the 29.5-inch width adds a useful span measurement. The 7/8-inch diameter requires a matching riser clamp. The package lists one handlebar, with no additional installation components identified as included.

Skip it if you need internal wiring holes; Lexoro’s HDHBAR03-1-1-8GB is pre-drilled and internally deburred.

This CELOMT suits riders wanting a black 8-inch-rise bar with substantial listed pullback, provided their motorcycle uses a 7/8-inch clamp. Compare its width and reach with your riding position before choosing this replacement.

Listed on Amazon as: 7/8'' Ape Hanger Handlebars (8'' Rise, Black Iron)

#5 · Best Listed Width

5. YITOPT 8-Inch Drag Bar

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: 8-inch rise without wire slots.

Why it ranks #5: The 7/8-inch bar is listed at 8-inch rise and 27.95-inch width; its title also states it has no pre-cut wire slots.

The no-pre-cut-wire-slot layout distinguishes this YITOPT bar, a consideration for custom builds that do not require pre-cut routing openings. Its title specifies a 7/8-inch diameter, 8-inch rise, and 27.95-inch width, giving buyers key dimensions to compare with their clamp and desired bar span before installation.

The title identifies alloy steel and a gloss-black finish, along with an 8-inch rise and 27.95-inch width; these details describe the bar’s material, appearance, height, and span. Its 7/8-inch diameter points toward matching clamps, while the no-pre-cut-slot specification affects wiring plans: the listed bar does not provide those openings. The product description claims resistance to rust, corrosion, bending, and deformation, but does not supply further installation provisions or additional dimensions in the provided facts.

Skip it if you need pre-drilled internal wiring; Lexoro’s HDHBAR03-1-1-8GB includes wiring holes and a deburred interior.

Consider this YITOPT for a gloss-black 8-inch-rise setup with a 7/8-inch clamp when its 27.95-inch width suits your build. The absence of pre-cut wire slots is a firm boundary for internal-routing plans.

Listed on Amazon as: 7/8" (22.2mm) 8" Rise Drag Ape Hanger Handlebars Gloss Black Alloy Steel, 27.95" Width Fit Harley Sportster Bobber Brat Cafe Racer Chopper & No Pre-Cut Wire Slots

#6

6. YITOPT Drag Ape Hanger

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: Gloss-black drag-bar styling.

Why it ranks #6: The listing identifies a 7/8-inch clamp fit and a 10-inch rise in its main features, but other descriptions give conflicting dimensions.

The listed 10-inch rise and 28-inch width give this YITOPT handlebar a tall profile with a more compact span than many wide ape-hanger setups. Its glossy-black appearance suits a dark custom build, but the listing gives conflicting diameter details, so the clamp measurement needs careful verification before choosing it.

The feature list identifies alloy steel, a 10-inch rise, 28-inch width, and 2.83-inch pullback; together, those dimensions describe a tall bar with less listed rearward sweep than bars with 10.8-inch pullback. The same listing calls the bar 1 inch in diameter while instructing buyers to check for a 7/8-inch riser clamp, and its additional description gives different dimensions. That inconsistency complicates fit assessment, so confirm the actual bar and clamp dimensions before installation.

Skip it if you need internally routed wiring; Lexoro’s HDHBAR03-1-1-8GB is pre-drilled for internal wiring.

This YITOPT may suit a rider focused on a tall, narrow drag-bar profile and alloy-steel construction. Its conflicting diameter and dimension descriptions are a real fit boundary, so it is not the clearest choice when clamp compatibility must be unambiguous.

Listed on Amazon as: 7/8'' Chrome Drag Ape Hanger Handlebar

#7

7. haaifroe 8-Inch Z-Bar

• Material: Iron
• Material Type: Iron

Best for: Broad 1-inch custom-bike fit.

Why it ranks #7: This 8-inch bar offers a 1-inch tube, 4.5-inch pullback, and stated compatibility with several motorcycle brands, but is not 7/8-inch.

A stated 1-inch diameter and 4.5-inch pullback make this haaifroe bar a distinct option for riders seeking a moderate rearward reach across several listed motorcycle brands. Its 8-inch rise and powder-coated black surface complete the core setup, while the 1-inch dimension separates it from 7/8-inch clamp choices.

The iron tube is listed as 1.5 mm thick, and the powder-coated surface supplies the stated finish; together, these specifications describe the bar’s construction and exterior. An 8-inch rise with 4.5 inches of pullback gives buyers concrete height and reach measurements to compare with their riding position. The listing names Harley-Davidson, Honda, Yamaha, Suzuki, and Kawasaki among its applications, as well as custom-bike styles, but the 1-inch diameter remains the key clamp-compatibility check.

Skip it if you need a 7/8-inch clamp fit; CELOMT’s CL04015 8-inch chrome bar lists that diameter.

This haaifroe bar suits custom-bike owners seeking an 8-inch rise, 4.5-inch pullback, and broad listed brand compatibility. Its 1-inch diameter is the essential fit boundary, so match the clamp before selecting it.

Listed on Amazon as: Motorcycle Handlebar 8" Rise 1 Inch Ape Hanger 25.4mm Z-Bars for Harley Sportster XL883 XL1200 Softail Dyna For Yamaha Suzuki Kawasaki Chopper Cruisers Bobber Cafe Racer custom Bike 1982-Up

#8 · Best Wiring Detail

8. Lexoro 8-Inch Handlebar

Best for: Internal-wiring Harley fitments.

Why it ranks #8: The 1-inch, 8-inch-rise steel bar is pre-drilled for internal wiring and deburred inside, though it excludes electronic-throttle models.

Pre-drilled internal-wiring passages, with deburred inner surfaces, are the defining feature of this Lexoro bar: they support cleaner routing while helping protect wires during installation. The 8-inch rise and 1-inch tube and clamp diameter suit a different setup from 7/8-inch bars, and the listing expressly excludes electronic-throttle models.

Heavy-duty steel construction and a corrosion-resistant gloss-black painted finish provide the listed material and surface details for this replacement. Pre-drilled passages support internal wiring, and deburring inside the tube helps reduce abrasion during routing, so the wiring provisions matter to installation workflow rather than appearance alone. The bar is specified for 1-inch clamps and tubes and lists Harley Softail FLST, FXST, and Sportster XL compatibility, plus select motorcycles with matching clamps. Electronic-throttle models are excluded.

Skip it if you need a 7/8-inch bar; CELOMT’s CL04015 8-inch handlebar lists a 7/8-inch diameter.

This Lexoro suits riders with a compatible 1-inch clamp who want an 8-inch rise and internal wire routing. Its listed Harley fitments and electronic-throttle exclusion are important boundaries; check both before planning the installation.

Listed on Amazon as: 8" Rise Ape Hanger Handlebar Compatible with Harley Softail FLST FXST Sportster XL, 1 Inch Motorcycle Handlebar, Gloss Black

#9

9. AIRCMT 10-Inch Batwing Bar

• Material: Alloy Steel
• Material Type: Alloy Steel
• Dimensions: 35"L x 10"W

Best for: Wide 1-1/4-inch Harley bars.

Why it ranks #9: It supplies a 10-inch rise and 8-inch pullback, but its 1-1/4-inch tube and 1-inch clamp fit differ from 7/8-inch setups.

A 35-inch overall width and 10-inch rise give this AIRCMT batwing bar a broad, tall profile, while its 1-1/4-inch tube sets it apart from standard 7/8-inch options. The listed 8-inch pullback and 10-1/2-inch center width help riders assess reach and mounting space before selecting this gloss-black setup.

The high-strength iron construction uses a seamless steel tube with a polished, powder-coated gloss-black surface, connecting its listed build material to its finish. Pre-drilled wiring holes support cable routing, and the 10-inch rise with 8-inch sweep defines the hand position. The bar has a 1-1/4-inch tube and a 1-inch clamp mounting specification, so those separate dimensions need to match the motorcycle’s setup. Listed applications include Softail, Sportster XL, Road King, and 1998–2013 Road Glide; several exclusions also apply.

Skip it if you need a 7/8-inch bar; AIRCMT’s ARCHBM25D78R10C has a 7/8-inch tube diameter.

This AIRCMT suits riders seeking a wide, tall bar with wiring holes and compatible listed Harley fitments. Its 1-1/4-inch tube, 1-inch mounting specification, and stated model exclusions make application checks essential.

Listed on Amazon as: 10 Inch Rise 1-1/4'' Diameter Batwing Ape Hangers Handlebar Compatible With Harley Softail FLST FXST Sportster XL 883 1200 Touring Road Glide+Road King (Gloss Black) – Size A

#10

10. SZRHPW 8-Inch Chrome Bar

• Material: Iron
• Material Type: Iron

Best for: Chrome bars for listed Harleys.

Why it ranks #10: Its 8-inch rise and 1.25-inch tube suit specified Road King and Softail models, not the 7/8-inch handlebar use case.

The model-specific fit list is the key distinction of this SZRHPW bar: it names Road King 2014-and-up and Softail 2018-and-up applications, including several Softail variants. Its 8-inch rise and 1.25-inch tube target riders seeking a chrome ape-hanger profile for those listed motorcycles, rather than a general 7/8-inch replacement.

The 1.25-inch tube diameter is stated to match stock setups, and the listed fitments include ABS-enabled models, offering concrete application details for Road King and newer Softail owners. An 8-inch rise supplies the bar’s stated height and upright styling, while iron construction and a silver-chrome finish define its material and appearance. Because compatibility is specifically described by model and year range, riders should use that listed scope rather than assume fit across other Harley models.

Skip it if you need a 7/8-inch universal-style bar; AIRCMT’s ARCHBM25D78R10C lists a 7/8-inch diameter and named applications.

Pick this SZRHPW for an 8-inch chrome bar if your motorcycle falls within its listed Road King or Softail years and variants. The model-specific fit scope is the main boundary; other applications are not established in the supplied details.

Listed on Amazon as: 8" Rise Ape Hangers Chrome 1.25" Tube Riser Handle Bars Handlebar Fit For Harley Road King 2014+ & Softail 2018+ (Fat Boy/Breakout)