Best Car Jacks For Trucks for Pickups and SUVs

#1 · Best Overall

1. AUTOWN 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel, Aluminum
• Compatible with Vehicle Type: SUV Truck

Best for: Higher-clearance pickups and SUVs.

Why it ranks #1: Specifically listed for SUV and truck use, it lifts up to 6,600 pounds from 7.1 to 20.9 inches; check your frame clearance first.

A 7.1-to-20.9-inch lifting range gives the AUTOWN jack substantial height for pickups, full-size SUVs, crossovers, and vans. Its 3-ton, 6,600-pound capacity and alloy-steel construction target demanding garage lifting, while the hydraulic quick-lift system helps move through raising tasks more efficiently.

The 7.1-inch minimum height makes this a higher-clearance choice rather than a low-profile approach, while the 20.9-inch maximum extends its reach for listed pickups and full-size SUVs. A 6,600-pound rating pairs with heavy-gauge alloy steel for the intended lifting workload. The quick-lift hydraulic system supports a more direct raising workflow, and the 23.4-inch length is relevant when allocating floor-jack storage space. The supplied fit guidance calls for measuring frame clearance, particularly on sedans.

Skip it if you need a lower starting height; VEVOR S385 begins at 3.35 inches for tighter-clearance access.

Pick the AUTOWN for a pickup or full-size SUV needing a lift that reaches 20.9 inches. Its 7.1-inch minimum is the key boundary, so low-clearance vehicles may need a lower-profile jack.

Listed on Amazon as: AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)

#2 · Integrated Jack Stand

2. Powerbuilt 3 Ton Unijack

• Load Capacity: 6000 lb
• Material: Metallic-Fiber
• Compatible with Vehicle Type: Truck

Best for: Truck lifting with integrated support.

Why it ranks #2: Designed for pickups, SUVs, vans, and Jeeps, this bottle jack combines lifting and a ratcheting safety bar in one unit.

A bottle jack and jack stand combined in one unit let the Powerbuilt Unijack lift and hold a vehicle without a separate stand in the same setup. Its 11-to-21-inch range and wide base target pickups, SUVs, vans, and Jeeps, including RV and off-road use.

The integrated ratcheting safety bar locks the stand in the raised position, connecting the lifting and holding stages in one compact unit. An 11-inch minimum and 21-inch maximum give the jack a range suited to the listed pickups, SUVs, vans, and Jeeps. The wide base adds a stability-oriented footprint for RV and off-road use, while the 22.7-pound listed weight informs carrying and storage decisions. The listing gives a 6,000-pound load capacity; use remains subject to the vehicle’s approved lifting points.

Skip it if you need low-profile access; BIG RED T83006 starts at 5-7/8 inches and reaches 20-7/8 inches.

Choose the Unijack if you want lifting and locked support together for a truck, SUV, van, Jeep, or RV. Its 11-inch starting height sets the clearance boundary, and vehicle lifting points still matter.

Listed on Amazon as: Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

#3 · Powered Lift Kit

3. Trihelper Electric Jack Set

• Load Capacity: 5 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Powered roadside tire changes.

Why it ranks #3: Its 5-ton rating, 12V operation, 17.7-inch maximum height, built-in tire pump, and impact wrench make it a versatile roadside kit.

A 12V motor raises the Trihelper jack at the push of a button, reaching 17.7 inches in two minutes for vehicles under its 5-ton rating. The integrated tire pump adds inflation to the tire-change workflow, making this electric set distinct from manually pumped floor jacks.

Power from a cigarette lighter or car connection lets the jack operate without repeated handle pumping, and the stated two-minute lift to 17.7 inches gives buyers a clear operating expectation. An automatic stop at maximum height and manual release for lowering address control at the upper limit, while a circuit breaker guards against overload. The built-in air pump combines inflation with lifting for tire changes. Because operation depends on 12V vehicle power, access to that connection shapes where the set is practical.

Skip it if you need a jack that operates without vehicle power; BIG RED T83006 is a hydraulic trolley jack with a manual pumping workflow.

Choose the Trihelper for tire changes where powered lifting and integrated inflation suit the task, within its under-5-ton guidance. Its 12V connection requirement is the main boundary for roadside or garage use.

Listed on Amazon as: Trihelper Electric Car Jack Set 5 Ton Hydraulic Jack Car Lift Floor Jack with Integrated Tire Pump and Impact Wrench for Sedans SUV MPV Sedan Truck Change Tires Garage Repair

#4 · Extended-Height Reach

4. BIG RED T83006 Floor Jack

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel
• Compatible with Vehicle Type: Car, Sport Utility Vehicle, Truck, Van

Best for: Extended-height truck garage work.

Why it ranks #4: Listed for trucks and SUVs, its 6,000-pound capacity and maximum height of 20-7/8 inches suit vehicles needing extra lift.

A 20-7/8-inch maximum lift and extra saddle make the BIG RED T83006 a fit to consider for SUVs and extended-height trucks. Its 3-ton, 6,000-pound capacity and steel trolley construction support garage lifting, while four casters help maneuver the jack into position.

The 5-7/8-inch minimum sets the clearance needed to roll the jack beneath a vehicle, and the 20-7/8-inch maximum provides useful height for listed SUVs and extended-height trucks. Its extra saddle adds another contact option, while two large steel casters and two 360-degree swivel casters support repositioning around the work area. The 6,000-pound rating defines the load boundary, and the steel construction suits service use. Its trolley footprint makes storage space a practical consideration.

Skip it if you need access below 5-7/8 inches; VEVOR S385 has a 3.35-inch minimum height for low-clearance entry.

This BIG RED suits garage owners lifting SUVs or extended-height trucks that fit its 6,000-pound rating and clearance range. The extra saddle and casters aid positioning, but low vehicles may need a lower-entry jack.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#5

5. AV Steel 3 Ton Single-Piston Jack

• Load Capacity: 6000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Truck

Best for: Standard pickup maintenance.

Why it ranks #5: The listing includes standard pickup trucks and gives a 6,000-pound capacity with a 5.5-to-18.5-inch range, but excludes heavy-duty and lifted trucks.

AV Steel specifies this 3-ton jack for standard pickup trucks, SUVs, minivans, and most cars, with a 5.5-to-18.5-inch lift range. That combination covers many everyday vehicle-service tasks, while the product’s own guidance clearly excludes lifted vehicles, heavy-duty trucks, and RVs.

The 6,000-pound capacity and 18.5-inch maximum lift suit listed standard vehicles when the load and lift points fall within the product’s limits. Its 5.5-inch minimum provides a defined entry height, and the single-piston hydraulic design is a straightforward operating setup. At 63.9 pounds, its listed weight is relevant when moving or storing the jack in a garage. For EVs, the supplied guidance recommends a jack-point adapter to align with manufacturer-specified lifting points.

Skip it if you lift a heavy-duty truck or RV; Powerbuilt 620471 is presented for trucks and SUVs, with an 11-to-21-inch range.

This AV Steel model fits owners maintaining standard pickups, SUVs, minivans, or cars within its 6,000-pound rating. Its clear boundary is vehicle class: it is not for lifted vehicles, heavy-duty trucks, or RVs.

Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks

#6

6. VEVOR 2.5 Ton Floor Jack

• Load Capacity: 2.5 tons
• Material: Steel
• Compatible with Vehicle Type: Truck

Best for: Low-entry family vehicle lifting.

Why it ranks #6: It is listed as compatible with trucks and lifts up to 5,500 pounds, with a 3.35-to-14.96-inch range; capacity may limit truck fit.

A 3.35-inch minimum height lets the VEVOR 2.5-ton jack slide beneath vehicles with limited clearance, while its 14.96-inch maximum provides a defined working lift. The 5,500-pound capacity and steel construction suit tire, oil, and brake maintenance on listed family cars, trucks, and SUVs.

The low starting point helps with placement beneath vehicles where ground clearance is tight, and the 14.96-inch upper limit sets the available lifting range for a repair. Its single-piston design provides the raising mechanism, while the 5,500-pound rating gives a clear load boundary for selecting a vehicle task. The steel body and 22.2-by-8.7-by-5.2-inch dimensions also help buyers plan garage storage. It is a lower-capacity option than a 3-ton jack, so load requirements remain central.

Skip it if you need a higher maximum lift; AUTOWN JAC-203BL reaches 20.9 inches for listed pickups and SUVs.

The VEVOR suits home users needing low entry for tire, oil, or brake work on a vehicle within 5,500 pounds. Its 14.96-inch maximum and 2.5-ton rating define the jobs it can cover.

Listed on Amazon as: VEVOR 2.5 Ton Low Profile Heavy-Duty Steel Racing Floor Jack

#7

7. Jack Boss 3 Ton Floor Jack

• Load Capacity: 3 tons
• Material: Aluminum
• Compatible with Vehicle Type: Bus, Trailer

Best for: Low-profile SUV and trailer lifting.

Why it ranks #7: The 6,600-pound capacity and 3-15/16-to-18-5/16-inch range suit some SUVs and trailers, but truck fit is not specifically stated.

A 3-15/16-inch minimum height helps the Jack Boss low-profile jack reach under vehicles with limited clearance, while its 18-5/16-inch maximum extends the working range. The aluminum-and-steel construction, dual-piston quick-lift pump, and 6,600-pound rating suit a broad set of garage lifting tasks.

The low entry height can simplify positioning beneath lower vehicles, and the 18-5/16-inch upper limit provides more lift travel once the jack is in place. Its dual-piston pump supports quicker raising, while the stated 6,600-pound capacity covers loads within the rating. The rubber saddle and two-piece handle are included for vehicle contact and operation. At 58.5 pounds, the listed weight is worth considering for moving it around a garage or storing it between jobs.

Skip it if you need a lighter listed unit for carrying; Powerbuilt 620471 weighs 22.7 pounds and combines a jack with a stand.

This Jack Boss suits garage users needing low-profile access and a 6,600-pound rating for listed vehicles including SUVs and travel trailers. Its 58.5-pound weight is a practical boundary for frequent relocation.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#8

8. AV Steel 3 Ton Low-Profile Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-clearance standard pickups.

Why it ranks #8: Its 6,600-pound capacity and 3-1/8-to-19-7/8-inch range are substantial, but the listed compatible vehicle type is car rather than truck.

A 3-1/8-inch minimum lift height lets the AV Steel 3-ton floor jack reach beneath many low-riding vehicles, while its 19-7/8-inch maximum height provides room to raise them for service. The dual-piston quick-lift pump pairs low entry with a faster lifting workflow for garage jobs.

The low starting height can ease placement beneath a vehicle with limited ground clearance, and the stated lift range extends to 19-7/8 inches for raising it after positioning. Its 6,600-pound capacity is specified alongside dimensions of 29-1/8 by 13-3/4 by 5-7/8 inches, giving buyers useful limits for planning storage and workspace. The dual-piston pump supports quicker lifting, while the product listing names cars as compatible; truck owners should weigh that distinction when selecting it.

Skip it if you want truck compatibility explicitly stated; AV Steel AV-300101F lists standard pickup trucks as suitable.

This jack suits buyers who need low entry and a 19-7/8-inch lift range for garage work. Its 6,600-pound rating is substantial, but the listed vehicle compatibility is car, so truck fit remains an important boundary.

Listed on Amazon as: AV Steel Low Profile Floor Jack 3 Ton (6600 lbs), Heavy Duty Hydraulic Jack for Car, Heavy-Duty Floor Jack with Dual Pistons Quick Lift Pump, Car Floor Jack with Lifting Range 3-1/8'' to 19-7/8''

#9

9. Maxority 3 Ton Low-Profile Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Low-clearance garage lifting.

Why it ranks #9: The 6,600-pound capacity and low-profile, extended-reach design may help with low clearance, but listed vehicle compatibility is car.

An ultra-low profile and extended reach let the Maxority 3-ton jack slide beneath vehicles with little undercarriage clearance, including lowered cars and modified vehicles. Its dual-piston quick-lift pump adds a faster lifting workflow for home and workshop maintenance, while the alloy-steel construction gives it a substantial floor-jack build.

The low-profile shape addresses access before lifting begins, and the extended reach helps position the jack beneath vehicles where a shorter approach can be awkward. Once in place, the dual-piston quick-lift pump supports a quicker pumping workflow than a basic single-piston setup. Its 6,600-pound capacity suits substantial lifting tasks within the listed rating, and the included pumping handle provides the operating component. The listing identifies cars as the compatible vehicle type, so truck buyers should treat fit as a key boundary.

Skip it if you need explicitly listed truck compatibility; AV Steel AV-300101F is specified for trucks and standard pickups.

Choose this Maxority for garage maintenance on a low-clearance car or modified vehicle where its extended reach and dual-piston pump are useful. Its 6,600-pound rating does not replace checking whether the listed car fit applies to your truck.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)

#10

10. DNA Motoring 2 Ton Jack

• Load Capacity: 2 tons
• Material: Alloy Steel
• Compatible with Vehicle Type: Car

Best for: Light-duty car garage service.

Why it ranks #10: Its listing explicitly says it is not recommended for pickups or trucks, and its 4,000-pound capacity is lower than the truck-oriented options.

A 5.1-inch minimum lift height and 13-inch maximum make this DNA MOTORING trolley jack a compact-range option for routine car service. Its 2-ton, 4,000-pound capacity is explicitly bounded: the supplied product information says it is not recommended for pickups, trucks, or oversized SUVs.

For a car within its stated 4,000-pound capacity, the 5.1-to-13-inch range gives a defined working window for garage lifting. The hydraulic trolley format lets the operator raise the jack to the desired height, while its alloy-steel construction is intended for service use. Those strengths do not make it a truck jack: the product information specifically excludes pickups, trucks, and oversized SUVs from its recommendation. Buyers shopping for truck maintenance should therefore prioritize the listed vehicle limitation over the general heavy-duty wording.

Skip it if you service pickups or larger SUVs; Powerbuilt 620471 is specifically presented for pickups, SUVs, vans, and Jeeps.

Consider this jack for garage service on a car that falls within its 2-ton rating and 13-inch maximum lift. It is a poor match for truck work because the supplied guidance expressly rules out pickups and trucks.

Listed on Amazon as: DNA Motoring TOOLS-00234 Low Profile Hydraulic Trolley Service/Floor Jack, 2 Ton (4000 lbs) Capacity, Lifting Range 5.1"-13", Black