Best Go Kart Steering Wheel for Common Replacement Setups

#1 · Best Overall

1. Onhumillion 270mm Wheel

• Compatible with Vehicle Type: Go Kart
• Grip Size: 10.5 in

Best for: Measured off-road replacement.

Why it ranks #1: States fitment for 150cc–300cc go-karts and a 35mm center bore, and includes a black center horn cover for a more clearly specified replacement.

ONHUMILLION specifies both a 35 mm center bore and compatibility with 150cc–300cc vehicles, giving buyers concrete fit information for this 270 mm replacement. Its three-spoke aluminum frame and ABS rim are presented for go-karts, buggies, ATVs, UTVs, and racing dune buggies.

The stated 270 mm outer diameter and 35 mm center bore give buyers two measurements to compare with a steering column, while the listed 150cc–300cc range narrows the intended vehicle applications. ONHUMILLION pairs a lightweight aluminum frame with an ABS rim described as wear-resistant, non-slip, and rust-proof for outdoor terrain. The kit includes a black center horn cover and steering wheel, making those supplied pieces clear before planning a replacement.

Skip it if you use a full-size vehicle with a non-standard 35mm shaft; Quivorant’s 270mm wheel is listed for go-karts and ATVs.

Choose it when replacing a 270 mm wheel on a listed 150cc–300cc kart, buggy, ATV, or UTV and the 35 mm center bore matches. It is not listed for full-size vehicles with non-standard shafts.

Listed on Amazon as: 270mm Go Kart Steering Wheel Replacement for 150-300cc ATV UTV Buggy

#2 · Quick-Release Pick

2. Enajucy Quick-Release Wheel

• Material: Acrylonitrile Butadiene Styrene (ABS), Aluminum
• Compatible with Vehicle Type: Go Kart
• Grip Size: 10.5 in

Best for: Quick driver changes.

Why it ranks #2: Combines a 10.5-inch, 3-spoke aluminum-and-ABS construction with rubber grips and a quick-release feature for compatible kart setups.

A quick-release feature is the key draw of Enajucy’s 10.5-inch, three-spoke wheel, letting drivers switch without removing the wheel. Its aluminum construction and ABS grip give kart owners a lightweight metal-and-plastic replacement with a familiar, rounded handhold for recreational driving.

The 27 cm diameter provides a defined size for replacing an existing kart wheel, while the three-spoke metal frame and rubber hand grips combine a lightweight structure with a tactile contact surface. Enajucy also specifies quick release for switching drivers, which can simplify handoffs during shared rides. Its listing calls the wheel universal and names go-karts, ATVs, and similar vehicles, but does not provide mounting-hole dimensions; buyers should treat the stated compatibility as a starting point, not a measurement match.

Skip it if you need stated mounting-hole measurements before choosing a replacement; ONHUMILLION’s 270mm wheel lists a 35mm center bore.

A fit for kart owners who want a 27 cm wheel and expect to hand the vehicle between drivers, provided the quick-release interface suits their setup. Check the steering-column connection before treating its universal description as a confirmed fit.

Listed on Amazon as: 10.5inch/27cm Kart Steering Wheel – 3 Spokes Quick Release Off-Road Cart Steering Wheel Interior With Holes For Go Kart Beach Kart Replacement Vehicle Universal (10.5inch/27cm – Black)

#3 · Easy-Mount Pick

3. Prelineva 10.5-Inch Wheel

• Compatible with Vehicle Type: ATV, Go Kart
• Grip Size: 10.5 in

Best for: Three-hole repair wheel.

Why it ranks #3: Offers a 10.5-inch universal-style replacement with a metal structure, comfortable outer grip, and three mounting holes for compatible ATVs and go-karts.

Prelineva’s three mounting holes make its 10.5-inch steering wheel a clearly described replacement route for compatible go-karts and ATVs. A metal core and plastic outer grip combine structure with a comfortable, anti-slip surface, suiting repairs or a simple refresh when the existing mounting setup matches.

The 27 cm outer size gives a useful reference when replacing a worn or broken wheel, and the three mounting holes are specified for straightforward installation on compatible setups. Prelineva’s metal structure supports the wheel while its plastic outer layer provides the grip surface, which the listing describes as anti-slip and comfortable. Its universal-style application covers go-karts and ATVs, but the supplied specifications do not state a center-bore or hole-spacing measurement.

Skip it if you need measured hub dimensions before purchase; ONHUMILLION’s 270mm wheel specifies a 35mm center bore.

This is a practical repair or refresh option for go-kart and ATV owners seeking a 27 cm wheel with a three-hole layout. Make the hub pattern a fit checkpoint, since dimensions are not listed.

Listed on Amazon as: Go Kart Steering Wheel 10.5Inch/27cm, 3 Spoke Quick Release Universal Off-Road Cart Wheel with Holes for Go Kart, Beach Kart & ATV Replacement

#4

4. Quivorant 270mm Wheel

• Material: Metal, Plastic
• Compatible with Vehicle Type: ATV, Go Kart
• Grip Size: 270 mm

Best for: Foam-grip kart replacement.

Why it ranks #4: Its 270mm metal wheel has a soft PU foam covering, three mounting holes, and stated replacement use for 150cc–250cc go-karts.

Quivorant pairs a 270 mm metal wheel with a soft PU-foam outer grip, giving riders a cushioned contact surface on a replacement sized for go-karts and ATVs. Three mounting holes support installation, making this a straightforward option for replacing an old wheel where the mounting pattern matches.

The 270 mm diameter offers a familiar replacement size, while the three mounting holes provide the stated installation arrangement for a compatible steering hub. Metal construction supplies the wheel’s structural core, and the PU foam around its outside gives hands a softer surface during driving. Quivorant lists go-karts and ATVs and identifies 150cc–250cc engines in its additional facts, so buyers can narrow the intended application while still checking their hub pattern.

Skip it if you ride a 300cc kart; ONHUMILLION lists compatibility through 300cc and gives a 35mm center bore.

Choose it for a 150cc–250cc go-kart or ATV replacement where a 270 mm wheel and three-hole mounting arrangement suit the hub. Its listed engine range makes it a poor match for applications above 250cc.

Listed on Amazon as: Off-Road Kart Steering Wheel, 270mm 3 Spokes Quick Release Vehicle PU Foam Interior Strong Iron Steering Wheel With Holes For Go Kart Replacement

#5

5. NINEFOX 10.5-Inch Wheel

• Material: Metal
• Compatible with Vehicle Type: ATV, Go Kart
• Grip Size: 270 mm

Best for: Three-hole universal replacement.

Why it ranks #5: A 10.5-inch, 3-spoke universal replacement with a metal inner structure, plastic outer rim, and three mounting holes for compatible vehicles.

NINEFOX’s 10.5-inch wheel uses three mounting holes, a practical feature for replacing a broken or worn kart wheel when the existing hub matches. Its metal inner structure and plastic outer rim form a rounded grip, with the 27 cm size also listed for ATVs and beach karts.

The 270 mm diameter gives buyers a clear size to compare with an existing wheel, and the three mounting holes are identified as an easy-install feature. NINEFOX describes a metal inner structure with a plastic outer rim, pairing a supporting frame with a more comfortable rounded surface for holding during a ride. The listing names go-karts, beach karts, and ATVs, while additional facts specify 150cc–250cc engines; hub-hole dimensions are not supplied.

Skip it if you require a stated center-bore measurement; ONHUMILLION’s 270mm wheel specifies a 35mm center bore.

A sensible candidate for owners replacing an old 27 cm wheel on a kart, beach kart, or ATV in the stated engine range. Confirm that its three-hole layout matches your hub before installation.

Listed on Amazon as: Go Kart Steering Wheel 10.5inch, 3 Spoke Universal Replacement Wheel

#6 · Largest Diameter

6. JIANWEI 300mm Wheel

• Material: Polyurethane (PU)
• Compatible with Vehicle Type: ATV, Go Kart
• Grip Size: 300 millimeters

Best for: Larger 300mm wheel.

Why it ranks #6: Its 300mm diameter is larger than the 270mm options, with a heavy-duty alloy frame, non-slip PU foam, and stated ATV and go-kart use.

JIANWEI’s 300 mm diameter gives this wheel a larger stated size than common 270 mm replacements, making it an option for buyers seeking that broader wheel format. Its alloy frame is wrapped in non-slip PU foam, combining a structural core with a smooth, ergonomic hand surface for ATV or kart use.

The 300 mm diameter is the main fit consideration, giving buyers a direct measurement to compare with their cockpit and existing wheel. JIANWEI lists compatibility with ATVs and go-karts, including several Chinese kart engine sizes, and says the wheel also suits most domestic and kit karts. Its heavy-duty alloy frame and wear-resistant PU-foam covering pair a durable structure with a grippy outer surface; the supplied facts do not specify mounting-hole measurements.

Skip it if you need a 270 mm wheel for a compact cockpit; NINEFOX’s 10.5-inch replacement specifies that smaller diameter.

Consider it for an ATV or kart whose cockpit and hub can accommodate a 300 mm wheel, especially where the PU-foam grip is appealing. Its larger diameter is a fit boundary for smaller steering spaces.

Listed on Amazon as: Off-Road Kart Steering Wheel, 300mm 3 Spokes Quick Release Off-Road Wheel

#7

7. Kathleen0 270mm Wheel

• Material: Metal
• Compatible with Vehicle Type: ATV, Go Kart
• Grip Size: 270 mm

Best for: Foam grip for older karts.

Why it ranks #7: Provides a 270mm metal wheel with a PU foam outer grip and three mounting holes; the listing states fitment for 150cc–250cc engines.

Kathleen0 combines a 270 mm metal wheel with an outer PU-foam grip, giving owners of older go-karts and ATVs a cushioned-surface replacement option. Three mounting holes support installation, and the listing identifies 150cc–250cc engines as the intended range for this classic three-spoke style.

The 270 mm size provides a concrete comparison point for an existing wheel, while the three mounting holes offer the stated route to installation when the hub pattern matches. A metal body supports the wheel and PU foam covers the outside, which the listing describes as comfortable to grip. The stated application includes ATVs and go-karts with 150cc–250cc engines, but no mounting-hole spacing is supplied for a detailed fit check.

Skip it if you ride a 300cc kart; ONHUMILLION lists its 270mm replacement for vehicles up to 300cc.

A straightforward replacement candidate for a 150cc–250cc go-kart or ATV where the 270 mm size and three-hole pattern match. Its foam outer grip adds a cushioned hand surface, but the listed engine range is specific.

Listed on Amazon as: Steering Wheel 270mm lassic Hardware Accessories Interior With Holes Durable For Go Kart Replacement Vehicle Universal 3 Spokes PU Foam

#8 · Space-Saving Shape

8. FaHuoJiuKa D-Shape Wheel

• Material: Iron
• Compatible with Vehicle Type: Go Kart
• Grip Size: 14 in

Best for: Tight-cockpit D-shape wheel.

Why it ranks #8: The iron butterfly-style D-shape is designed to create more legroom and ease entry and exit in a compact go-kart cockpit.

FaHuoJiuKa’s butterfly-style D shape is intended to create more legroom, helping riders enter and exit a tight kart cockpit more easily. The iron wheel combines that lower profile with an ergonomic grip and solid feel, providing a space-conscious alternative to a round steering-wheel shape.

The lower-profile D shape is the central practical feature: the listing links it to added legroom and easier entry and exit in compact cockpits. Iron construction gives the wheel a solid feel, while its ergonomic form is described as helping reduce hand fatigue during driving. FaHuoJiuKa lists go-karts as the compatible vehicle type, but supplies no mounting dimensions, so cockpit clearance alone does not establish whether the wheel fits a particular hub.

Skip it if you need hole-spacing details to confirm a replacement; NINEFOX’s butterfly wheel lists triangle-hole measurements.

A fit to consider for go-kart drivers who want a lower-profile wheel to ease cockpit entry and exit. Its iron construction and ergonomic shape suit that use, but confirm hub compatibility separately.

Listed on Amazon as: Go Kart Steering Wheel, Butterfly D Shape Racing Wheel for Kart

#9

9. NINEFOX Butterfly Wheel

• Material: Iron
• Compatible with Vehicle Type: Go Kart
• Grip Size: 4.7 in

Best for: Heavy butterfly kart wheel.

Why it ranks #9: Its iron butterfly shape offers a lower-profile hand position; the listing gives a 35mm triangle-hole distance and 6.2mm mounting-hole diameter.

NINEFOX’s butterfly shape is intended to open up space for getting in and out of a kart, while its iron construction gives the wheel a notably solid feel. The listing also provides triangle-hole spacing and hole diameters, giving buyers concrete mounting measurements to check against their setup.

The D-shaped butterfly profile is described as providing more room for entry and exit, which can matter in a confined kart cockpit. NINEFOX pairs that form with an iron wheel weighing about 2.2 lb for a solid feel, and supplies triangle-hole spacing of 35 mm plus mounting-hole diameters of 6.2 mm and 7 mm for compatibility checks. The listed vehicle type is go-kart, so those measurements remain central to installation planning.

Skip it if you want a lighter 270mm replacement with a listed aluminum frame; ONHUMILLION’s wheel has an aluminum three-spoke frame.

This suits kart owners seeking a butterfly profile for easier cockpit access and who can use the stated triangular mounting measurements. Its iron construction brings a solid feel, with the approximately 2.2 lb weight worth considering.

Listed on Amazon as: Go Kart Steering Wheel,Butterfly Shape Steering Wheel Riding Go Kart Cart Racing Replacement Wheel

#10

10. QKDS Butterfly Wheel

• Material: Iron
• Compatible with Vehicle Type: Go Kart, Golf Cart
• Grip Size: 35 millimeters

Best for: Extra cockpit entry room.

Why it ranks #10: This iron butterfly-style wheel is listed for go-karts and golf carts, but its approximately 1kg stated net weight and limited fitment detail make matching essential.

The QKDS butterfly-style D shape leaves more room for getting in and out of a golf cart, a useful distinction for tight cockpit access. Its iron construction and ergonomic, smooth surface offer a solid-feeling wheel for kart or golf-cart projects where that shape suits the steering position.

The flattened lower D profile is described as creating more room to enter and exit, so it may help when cockpit access is a priority. QKDS pairs that shape with iron construction and an ergonomic smooth surface for a solid hand feel during driving. The listing names go-karts and golf carts, as well as DIY projects, but gives no overall diameter or mounting-hole pattern; those details matter when checking steering position and hub compatibility.

Skip it if you need a specified round-wheel diameter; NINEFOX’s 10.5-inch replacement gives a 270mm size and three mounting holes.

Consider this wheel for a golf cart or kart where a butterfly D shape can ease cockpit entry and exit. Its iron construction has a solid feel, but the missing diameter and hole pattern complicate fit checks.

Listed on Amazon as: Go Kart Butterfly Steering Wheel, Metal Sport Kart Racing Replacement