Best Shoot Blocker For Mower: Compare 10 Chute Blockers

#1 · Best Overall

1. ELITEWILL Quick Flip

• Dimensions: 25.2 x 12.2 x 4.9 in
• Weight: 15 lb

Best for: Flat-deck zero-turn owners.

Why it ranks #1: Names Ferris, Exmark, Gravely, Hustler, Toro, and Kubota, and specifies a flat fabricated deck with a squared discharge opening.

A flat mounting surface and squared discharge opening are the key fit requirements for this ELITEWILL quick-flip grass flap. Its listed compatibility spans Ferris, Exmark, Gravely, Hustler, Toro, and Kubota, giving owners of qualifying fabricated decks a route to replace ACS6000ULS and control the discharge chute.

The specified flat deck surface and squared opening help narrow compatibility before installation, while the named mower brands provide a useful starting point for checking a machine. This is a 15-pound assembly measuring 25.2 by 12.2 by 4.9 inches, so buyers should plan around its full dimensions when handling or storing it. Hole alignment can vary by model, and additional drilling may be needed, making fit verification and installation preparation important.

Skip it if you have a Bad Boy or a deck without the stated flat surface and squared opening; this fit depends on those specifications.

This suits zero-turn owners with a listed brand and a fabricated deck matching the stated surface and opening. Check hole alignment before installation, since some models may need additional drilling for a proper fit.

Listed on Amazon as: Mower Chute Blocker for Zero Turn, Quick Flip Grass Flap

#2 · Broad Model Coverage

2. ATVMaster Chute Blocker

• Dimensions: 25.6 x 12.2 x 5.1 in
• Weight: 16.87 lb

Best for: Extensive zero-turn fit lists.

Why it ranks #2: Lists an extensive set of mower and deck applications, including Ferris, Exmark, Gravely, and Kubota, while explicitly warning it does not fit Bad Boy.

A long compatibility roster is the ATVMaster blocker’s defining feature, spanning named deck types and mower families from Ferris, Exmark, Gravely, and Kubota to Great Dane and Cub Cadet. Its replacement references, ACS6000ULS and 088-6003-00, help owners compare the part against an existing chute blocker.

The extensive model list helps owners check more than a broad brand label, naming configurations such as Cub Cadet 50-inch ZTR and GT 2548/48-inch and LT 5252/60-inch models. That specificity can make preliminary fit screening more practical. The listing also expressly says it does not fit Bad Boy mowers, an important exclusion to check before ordering. Its dimensions are 25.6 by 12.2 by 5.1 inches, and the 16.87-pound weight informs handling and storage planning.

Skip it if you own a Bad Boy; this listing excludes it, while A-Outsanding names Bad Boy among its compatible 60-inch mower brands.

This is a fit-check option for zero-turn owners whose exact model appears in ATVMaster’s extensive roster. Its explicit Bad Boy exclusion matters, and the listed dimensions and weight are useful to consider before handling.

Listed on Amazon as: Zero Turn Mower Chute Blocker, Grass Flap Chute Blocker, Fit for Ferris, Exmark, Gravely, Hustler, Toro, Kubota ZTR, Replace OE ACS6000ULS / 088-6003-00

#3 · OEM Number Match

3. Valkynx Chute Blocker

• Dimensions: 23 x 11 x 4 in
• Weight: 15.97 lb

Best for: Commercial mower replacement shoppers.

Why it ranks #3: Identifies replacement numbers ACS6000ULS and 088-6003-00 and names major brands including Exmark, Ferris, Gravely, Toro, Kubota, John Deere, and Scag.

Matching the ACS6000ULS and 088-6003-00 OEM reference numbers gives the Valkynx blocker a clear replacement target. The listing also names major commercial zero-turn brands, including Exmark, Gravely, Hustler, Kubota, Scag, Toro, Ferris, and John Deere, helping owners begin a brand-based fit check.

The two replacement references give buyers a direct way to compare this shield with an existing part, while the broad brand list makes it relevant to many commercial zero-turn owners. Valkynx lists dimensions of 23 by 11 by 4 inches and a weight of 15.97 pounds, details that help plan handling and storage. The supplied fit information refers to a range of deck sizes but is incomplete, so checking the full compatibility details for the specific mower remains important.

Skip it if you need a fully stated deck-size list in the supplied details; Lesurey provides named compatible mower and deck configurations.

This is for commercial zero-turn owners matching one of Valkynx’s listed brands and replacement references. Because the available deck-size information is incomplete, confirm that the full compatibility details cover the particular mower configuration.

Listed on Amazon as: Mower Chute Blocker Fits Zero Turn Exmark Gravely Hustler Kubota Scag

#4 · Wide Brand List

4. CCNLHZM Discharge Shield

• Dimensions: 26.77 x 12.59 x 5.51 in
• Weight: 17.63 lb

Best for: Broad-brand compatibility checkers.

Why it ranks #4: Lists many zero-turn brands, including Altoz, Ariens, Ferris, Exmark, Kubota, Scag, and Toro, and identifies both replacement part numbers.

A wide brand roster, paired with ACS6000ULS and 088-6003-00 replacement references, makes the CCNLHZM blocker a candidate for owners checking many zero-turn makes. Its listed coverage includes Ferris, Exmark, Gravely, Hustler, Kubota, Bobcat, Toro, and numerous others, while expressly excluding Bad Boy.

The broad brand list helps owners identify whether their mower is a potential match, and the replacement numbers give a second check against an existing part. Additional supplied facts name deck configurations for several mower families, making exact-model verification more useful than brand matching alone. The listing’s dimensions are 26.77 by 12.59 by 5.51 inches and its weight is 17.63 pounds, so handling and storage need consideration. Bad Boy is expressly excluded from compatibility.

Skip it if you own a Bad Boy; CCNLHZM excludes it, while A-Outsanding lists Bad Boy among its compatible 60-inch mower brands.

This is for owners whose mower appears in CCNLHZM’s broad brand or model information and who can verify the exact configuration. Bad Boy owners should rule it out, and the listed weight merits handling consideration.

Listed on Amazon as: Mower Chute Blocker Mower Discharge Shield Fit for Ferris/Ex-Mark/Gravely/Hustler/Kubota/Bobcat and Most Zero Turn Mowers Advanced Chute System Replaces# ACS6000ULS 088-6003-00

#5

5. SIYOEN ACS6000ULS

• Weight: 16.52 lb

Best for: Detailed model-list matchers.

Why it ranks #5: Provides a detailed compatible-model list that includes Hustler, John Deere, Kubota, Scag, Toro, and Wright Stander; it excludes Bad Boy.

A detailed roster of named mower models is the SIYOEN blocker’s clearest advantage. The compatibility information covers machines such as Great Dane standers, newer Husqvarna models, Kubota diesel ZD models, and specified Scag and Toro decks, helping owners check their exact equipment against an ACS6000ULS replacement.

The model-by-model compatibility list is useful when a broad brand name is not enough: it distinguishes, for example, Kubota diesel ZD models and specified 52-, 60-, or 72-inch Toro decks. That detail supports a more focused fit check before ordering. SIYOEN identifies ACS6000ULS and 088-6003-00 as replacement references, but expressly excludes Bad Boy mowers. At 16.52 pounds and 24.3 by 12.7 by 5 inches, it is a substantial part to handle during setup.

Skip it if you own a Bad Boy; this listing excludes it, while the A-Outsanding ACS6000ULS blocker specifically lists Bad Boy compatibility for 60-inch decks.

This fits buyers who can match their mower against SIYOEN’s detailed model and deck list, especially owners of its named Kubota, Scag, or Toro variants. Bad Boy owners should choose another listed option.

Listed on Amazon as: ACS6000ULS Mower Chute Blocker Compatible with Most Zero Turn Mowers

#6

6. WildGear Chute Blocker

• Dimensions: 25.59 x 12.2 x 5.12 in
• Weight: 16.61 lb

Best for: Named-model replacement shoppers.

Why it ranks #6: Lists numerous models and deck applications, including Husqvarna, Hustler, Kubota, Scag, and Toro, but also excludes Bad Boy and names ACS6000B.

Compatibility with named stander, diesel, and deck configurations makes the WildGear blocker useful for owners checking a specific mower rather than relying only on brand names. Its list includes Great Dane, Kubota diesel ZD models, and specified Scag and Toro decks, alongside ACS6000B and 088-6000-00 references.

WildGear’s model list gives concrete fit checkpoints, including Great Dane 36-inch walk-behind and stander models, Kubota Lawn Tractor SR2100, and Scag 61- and 72-inch decks. This detail can help narrow a fit check before installation. The listing also says it does not fit Bad Boy mowers, so that exclusion should be treated as decisive. Its 25.59-by-12.2-by-5.12-inch dimensions and 16.61-pound weight describe a substantial component to move and store.

Skip it if you own a Bad Boy; WildGear excludes it, while A-Outsanding lists Bad Boy compatibility for 60-inch commercial zero-turn mowers.

This suits owners who can match their mower to WildGear’s specific model list and replacement references. Check the Bad Boy exclusion carefully, and account for the listed dimensions and weight when planning installation.

Listed on Amazon as: Zero Turn Mower Chute Blocker, Advanced Chute System, Fit for Ferris, Exmark, Gravely, Hustler, Kubota, Great Dane, Replaces ACS6000B, 088-6003-00

#7

7. FQRANBO Discharge Shield

• Dimensions: 23 x 5.4 x 12.4 in
• Weight: 16.91 lb

Best for: Debris-conscious zero-turn mowing.

Why it ranks #7: Lists broad zero-turn brand compatibility and provides specific examples such as Exmark Laser Series 60- and 72-inch decks.

The FQRANBO shield is described as helping contain flying debris and keep grass out of flower beds and driveways, linking chute control to a tidier mowing workflow. Its compatibility list includes Ferris, Exmark, Gravely, Hustler, Toro, and other zero-turn brands, with ACS6000ULS and 088-6003-00 replacement references.

The stated debris protection addresses both people and mower equipment, while the grass-containment benefit can reduce the need for raking, blowing, and re-mowing after a pass. Those outcomes make the shield relevant to properties where clippings near beds and driveways are a concern. FQRANBO lists broad brand compatibility and provides specific Exmark and Ferris model examples, giving owners useful fit checkpoints. Its dimensions are 23 by 5.4 by 12.4 inches, and the exact mower configuration still matters.

Skip it if you need a confirmed match for an unlisted model; Valkynx names a broad set of brands, though its available deck-size details are incomplete.

This suits zero-turn owners seeking to manage debris and clippings near beds or driveways, provided their mower matches the listed compatibility details. Check the specific configuration rather than assuming every zero-turn fits.

Listed on Amazon as: Mower Chute Blocker Discharge Shield Compatible with Ferris Exmark Gravely Hustler, Advanced Chute System Replaces ACS6000ULS 088-6003-00 Most Zero Turn ZT Mowers

#8

8. Lesurey Chute Shield

• Dimensions: 25.2"D x 5.12"W x 11.81"H
• Weight: 7.55 kg

Best for: Metal shield replacement buyers.

Why it ranks #8: Names Ferris, Exmark, Gravely, Hustler, and Toro, with additional listed deck applications including Articulator 60- and 72-inch models.

Metal construction and a named replacement number give the Lesurey blocker a straightforward identity for ZT mower owners. It references 088-6003-00 and ACS6000ULS, and lists compatibility with Ferris, Exmark, Gravely, Hustler, and Toro, with additional named mower and deck configurations in its description.

The metal material distinguishes this shield from listings that leave construction unspecified, while the two replacement references help owners compare it with an existing chute blocker. The description expands beyond brand names to give particular configurations, including Articulator 60- and 72-inch decks and Cub Cadet 50-inch ZTR. At 7.55 kilograms and 25.2 by 11.81 by 5.12 inches, it is a sizable component, so buyers should account for its weight during installation and storage.

Skip it if you want a stated quick-flip or manual operating mode; WUTIST explicitly identifies its blocker as manual.

This suits owners seeking a metal shield replacement who can match their mower to Lesurey’s listed brands and configurations. Its substantial dimensions and weight are worth considering for installation handling and storage.

Listed on Amazon as: Chute System Blocker Shield 088-6003-00 for ZT Mowers Discharge

#9

9. WUTIST Chute Blocker

• Dimensions: 9.9"D x 1.2"W x 9.9"H

Best for: Broad-brand manual chute control.

Why it ranks #9: Lists compatibility with brands including Kubota, Ariens, Hustler, John Deere, and Bobcat, but the supplied fit note is incomplete.

Manual operation and a long list of compatible mower brands define the WUTIST chute blocker. Its listed range includes Kubota, Ariens, Hustler, John Deere, Bobcat, Cub Cadet, and others, giving owners of many zero-turn models a starting point for checking whether this ACS6000ULS replacement suits their machine.

The broad brand list can help owners identify a possible match across different zero-turn makes, while the stated manual operation clarifies how the blocker is controlled. WUTIST also directs buyers to its compatibility table and detailed adaptation information, so checking the exact mower configuration is part of the selection process. The listed replacement references ACS6000ULS and 088600300; compatibility is not universal, and the listing notes a limitation for some F-series fitments.

Skip it if you need a verified fit without consulting an adaptation table; SIYOEN lists detailed compatible models and explicitly excludes Bad Boy.

This is for zero-turn owners whose mower appears in WUTIST’s compatibility information and who are comfortable checking adaptation details before purchase. Its manual operation is specified, but the exact fit should guide the decision.

Listed on Amazon as: Chute Blocker Compatible with Most Zero-Turn Mowers Kubota, Ariens

#10 · 60-Inch Deck Focus

10. A-Outsanding 60-Inch Blocker

• Dimensions: 25.2 x 12.2 x 6.3 in
• Weight: 16.5 lb

Best for: 60-inch deck steel-shield buyers.

Why it ranks #10: Targets 60- and 72-inch decks and claims compatibility with Bad Boy, SCAG, and John Deere, but its narrower stated fit limits broad-mower usefulness.

A specified quarter-inch solid-steel construction sets the A-Outsanding blocker apart for buyers focused on material and 60-inch deck compatibility. The listing names Bad Boy, SCAG, and John Deere, and references ACS6000ULS, 088-6003-00, and 088-5998-50 as replacement numbers.

The stated 1/4-inch steel construction gives buyers a concrete material specification to compare with other chute shields, while the listed 60-inch commercial zero-turn fit focuses the compatibility check. Naming Bad Boy, SCAG, and John Deere helps owners identify relevant brands, and three replacement references offer additional part-number checks. Minor drilling may be required on specific models, so installation may involve more than a direct bolt-on. Its listed dimensions are 25.2 by 12.2 by 6.3 inches.

Skip it if you need a listed fit for decks other than 60 or 72 inches; this listing focuses on those sizes, while Lesurey names additional configurations.

This suits owners of listed 60-inch commercial zero-turns who value a stated steel thickness and can check the replacement references. Allow for possible drilling on specific models during installation planning.

Listed on Amazon as: ACS6000ULS Mower Chute Blocker for 60" & 72" Zero Turn Mower Decks – Heavy Duty 1/4" Steel Grass Deflector Replacement for Bad Boy, SCAG, John Deere (Replaces 088-5998-50)