Best Stop Tail Turn Lights for Trailers and Trucks

#1 · Best Overall

1. Partsam Square Trailer Lights

• Weight: 16 oz
• Lens Material: Plastic
• Voltage: 12 V
• Compatible with Vehicle Type: Universal for Under 80" Inch width towing…

Best for: Submersible trailer replacements.

Why it ranks #1: Six functions, an IP68 rating, and a DOT-compliant description suit trailer replacement; the kit includes two lights, gaskets, and screws for vehicles under 80 inches.

IP68 waterproofing is the defining feature of these Partsam square lights, making them a fit to consider for trailers exposed to water, including boat trailers. The 12-volt combination units bring stop, turn, tail, marker, and reflector functions together, with white LEDs also included on the street-side light for its listed functions.

The two square lights serve six functions, combining stop, turn, tail, rear reflex reflector, side marker, and side reflex reflector roles. That consolidation can replace several separate light functions in a single assembly. The listing specifies a curb-side light with 15 red diodes and a street-side light with 19 red and white diodes. They are stated to suit vehicles under 80 inches wide, and the package includes gaskets and screws, but not a wire harness.

Skip it if you need a wire harness in the box; RUNBAITOO TYX-010A lists a complete kit with rubber rings.

Choose these for a 12-volt trailer under 80 inches wide that needs combined stop, turn, tail, and marker functions, especially around water. Plan separately for the wiring harness, which is not included.

Listed on Amazon as: Partsam 12V Submersible Square Led Trailer Light,Red White LED Stop Turn Tail License Brake Running Light Lamp for Trailers Under 80" Boat Trailer Truck Marine Camper RV Snowmobile,IP68,DOT Compliant

#2 · Best Oval Fit

2. PPI 6-inch Oval Lights

• Weight: 16 oz
• Lens Material: Polycarbonate
• Voltage: 12 V
• Compatible with Vehicle Type: Truck

Best for: Standard oval-hole replacements.

Why it ranks #2: These waterproof stop, turn, and tail lights meet stated DOT/SAE standards and include a three-pin watertight plug with wires for a standard oval opening.

A stated fit for a standard 2-1/2-by-6-3/4-inch oval hole is the key advantage of these PPI lights, helping buyers assess replacement fit before installation. The two red, waterproof six-inch oval units each use 10 LEDs and include a three-pin watertight plug with wires.

The specified standard oval-hole fit gives trailer owners a concrete measurement to compare against an existing opening before they remove a light. Each unit measures 2-5/16 by 6-7/16 inches, with additional thickness at the wiring connection, so that area also matters when checking clearance. A supplied three-pin watertight plug and wires can simplify hookup, while the waterproof construction is relevant for exposed trailer use. The listing says the lights meet applicable DOT/SAE standards.

Skip it if you want a surface-mounted bar rather than an oval-hole light; Frienda 10644 supplies 10-inch strips with mounting screws and caps.

Pick these for a truck or trailer with the stated standard oval opening and enough rear clearance for the wiring connection. The plug and wires are included, but check the connection depth against available space.

Listed on Amazon as: (2)6" Oval Red Trailer Truck waterproof Sealed Stop/Turn/brake Tail Lights

#3

3. Nilight 6-inch Oval Lights

• Weight: 0.43 kg
• Lens Material: Polycarbonate
• Voltage: 12 V
• Compatible with Vehicle Type: Truck, trailer

Best for: Red oval trailer-light pair.

Why it ranks #3: The two-pack is a waterproof 12-volt red oval option for trucks and trailers, with grommets specified in the title for that mounting style.

A pair of six-inch red oval LED tail lights gives this Nilight set its clearest use: replacing or adding matching rear lights on a truck or trailer. Its listed waterproof feature and 12-volt specification suit buyers seeking a straightforward oval-format option, while the title identifies grommet mounting for installation.

The 6-inch oval format offers a defined footprint for buyers matching an existing trailer-light opening, and the title calls out grommet mounting. Polycarbonate lenses and the listed waterproof feature are relevant for exterior vehicle lighting exposed to the elements. The pair runs at 12 volts and is specified for trucks and trailers. The supplied details identify these as red tail lights but do not describe additional functions, so buyers needing documented stop or turn operation should look at a more explicit combination-light listing.

Skip it if you need explicitly documented stop-and-turn operation; PPI CECOMINOD076167 lists stop, turn, and brake lights.

This pair suits truck or trailer owners replacing red six-inch oval tail lights with a grommet-mounted option. Choose it when tail-light use meets your needs; the supplied details do not specify its other lighting functions.

Listed on Amazon as: Nilight 6" Oval LED Trailer Tail Lights,Red, 2 Pack, Grommets Mount

#4 · Best Surface Mount

4. RUNBAITOO 6-inch Oval Lights

• Lens Material: Polycarbonate
• Compatible with Vehicle Type: Truck, Trailer, RV, Boat, Tractor

Best for: Waterproof oval trailer pair.

Why it ranks #4: This red pair combines stop, turn, and tail functions, with surface-mount grommets, an IP67 rating, and a DOT-certified description for trailers and RVs.

An IP67 waterproof rating paired with a six-inch oval format makes this RUNBAITOO set relevant to truck, RV, boat, and trailer owners replacing exposed rear lights. The two red LED units serve stop, turn, and tail functions, with dual brightness modes called out in the verified product details.

The six-inch oval shape gives buyers a familiar replacement format, while the included rubber ring supports the stated surface-mount grommet arrangement. Stop, turn, and tail functions are combined in each light, and dual brightness modes are listed, allowing the same unit to cover rear signaling roles. IP67 protection is suited to exposed vehicle use, including the listed boat and RV applications. The package contains two red lights; the supplied details do not specify a connector or wiring harness.

Skip it if you need a documented three-pin plug and included wires; PPI CECOMINOD076167 lists that connection.

This pair fits buyers seeking red, six-inch oval stop-turn-tail lights for a truck, RV, boat, or trailer. Its rubber ring supports the mounting setup, but plan your wiring because a connector is not specified.

Listed on Amazon as: 6 Inch Oval LED Trailer Tail Lights, Stop/Turn/Brake with Surface Mount Grommets, DOT Certified IP67 Waterproof for Truck RV Boat Trailer Bus, Complete Kit (2 pcs red)

#5

5. RUNHWEE 6-inch Oval Kit

• Lens Material: Polycarbonate
• Voltage: 12 V DC
• Compatible with Vehicle Type: Car, Truck, Boat, Trailer

Best for: Sealed oval LED replacements.

Why it ranks #5: The 12-volt red kit lists stop, turn, brake, and tail functions, a 10-LED design, IP67 protection, and a standard three-prong plug.

A stated 50,000-plus-hour lifespan sets these RUNHWEE oval lights apart for buyers prioritizing long service intervals. The pair combines parking, turn, tail, and brake functions in each red unit, while an IP67 rating and sealed construction are specified for protection against dust, rain, and snow.

The 6-inch oval units bring parking, turn, tail, and brake functions together, helping replace several rear-light roles with one assembly. Each light uses 10 LEDs, which the listing describes as energy-efficient and low-heat, and gives a lifespan claim exceeding 50,000 hours. IP67 sealing is specified for dust, sand, rain, and snow exposure. The product details also identify a surface-mount rubber grommet and standard three-prong plug, useful information for planning the opening and electrical connection.

Skip it if you need sequential amber turns in a light bar; PSEQT PSEQTW6R lists sequential yellow turn signals.

Choose these for a truck, RV, boat, or trailer needing oval lights with combined parking, turn, tail, and brake functions. The three-prong plug and surface grommet help plan installation; match the 12-volt requirement.

Listed on Amazon as: 6" Oval LED Trailer Lights Kit, 2PCS Waterproof Stop/Turn/Brake Tail Lights with 10 LED Markers for Truck, RV, Boat, Trailer (Red) DOT Compliant

#6 · Best Reverse Function

6. Partsam 16 LED Combination Lights

• Weight: 1.2 lb
• Lens Material: Polycarbonate
• Voltage: 12 V
• Compatible with Vehicle Type: Universal fit for most 12V vehicles like…

Best for: DIY multi-function 12V builds.

Why it ranks #6: Each light uses 12 red LEDs for stop, turn, and tail and four white LEDs for backup; rear studs mount to a flat surface, though modification may be needed.

Four white backup LEDs join 12 red stop, turn, and tail LEDs in each Partsam square unit, letting one assembly cover rear signaling and reverse lighting. The pair is listed for most 12-volt vehicles and has rear studs for flat-surface mounting, making it a candidate for custom replacements.

The red LEDs handle stop, turn, and tail functions, while the white LEDs serve backup lighting; reflectors are also listed. Rear studs support flat-surface mounting, but the product is not a direct replacement for Wrangler YJ, CJ, or JK factory lights and may require modification. The listing also says wire splicing is required, so installation involves electrical work rather than simply plugging in a factory connector. A license-plate light is not included.

Skip it if you need a direct Wrangler replacement with no splicing; PPI CECOMINOD076167 includes a three-pin watertight plug with wires.

These suit a DIY installer adding combined signaling and reverse lights to a 12-volt truck, trailer, or other listed vehicle. Allow for wire splicing, and treat Jeep YJ, CJ, and JK use as a modification project.

Listed on Amazon as: Partsam 2x Universal 16 LED Stop Tail Turn Signal Backup Reverse Brake Clearance Marker Lights Lamps Red/White Replacement for Jeep YJ JK CJ Truck Trailer Waterproof 12V

#7

7. Grote 53762 Stop Tail Turn Light

• Weight: 8 oz
• Lens Material: Acrylic,Polycarbonate
• Voltage: 12 V
• Compatible with Vehicle Type: Car, Truck

Best for: Three-stud Grote replacements.

Why it ranks #7: This dedicated stop tail turn light is listed for cars and trucks, with a three-stud design and double connector; detailed mounting dimensions are limited.

The three-stud mounting and double connector named in Grote’s model title make this stop-tail-turn light a candidate for buyers matching that particular connection and mounting arrangement. Its 12-volt specification and waterproof feature suit vehicle lighting applications, while the listing identifies car and truck compatibility.

A three-stud design gives installers a specific mounting arrangement to compare with the existing lamp, while the double connector identifies the connection style called out in the product name. The 12-volt specification supports selection for a matching vehicle electrical system, and the waterproof feature is relevant for exterior service. Grote lists car and truck compatibility and includes an instruction guide. The supplied product information does not detail the lamp’s dimensions or its individual light-output functions beyond the stop-tail-turn title.

Skip it if you need a stated oval-hole size before ordering; PPI CECOMINOD076167 specifies a standard 2-1/2-by-6-3/4-inch opening.

Consider this Grote light when a car or truck needs a 12-volt stop-tail-turn unit and its three-stud, double-connector arrangement matches the installation. The supplied details do not give dimensions, so account for clearance separately.

Listed on Amazon as: Grote 53762 Three-Stud Metri-Pack Stop Tail Turn Light with Double Connector

#8 · Best Sequential Signal

8. PSEQT 10-inch LED Light Bar

• Weight: 16 oz
• Lens Material: Polycarbonate PC Lens
• Voltage: 12 V DC
• Compatible with Vehicle Type: ATV, UTV, trailer, truck, pickup, golf cart…

Best for: Sequential heavy-duty light bars.

Why it ranks #8: The two 10-inch bars combine red lighting with sequential amber turns and list several trailer and truck functions, but wiring and fit need checking.

Sequential yellow turn signals distinguish this pair of PSEQT 10-inch light bars, alongside high- and low-brightness red lighting. That combination gives truck, trailer, and off-road vehicle owners multiple signal styles in a slim strip format, with the listing also identifying reverse, tail, brake, marker, clearance, and identification uses.

Each 10-inch strip combines red and amber LEDs, with red offered at high and low brightness and yellow turns shown sequentially. The multiple listed functions can consolidate signaling, reverse, and marker roles along a vehicle’s rear. The 12-volt direct-current specification suits matching systems, and the smoked polycarbonate lens with ABS housing defines the assembly materials. The listing names heavy-duty trucks, semitrailers, cargo trailers, boats, and off-road vehicles among applications, offering broad stated use without specifying mounting hardware.

Skip it if you want a documented oval-hole replacement with plug and wires; PPI CECOMINOD076167 specifies both.

Choose these bars for a 12-volt truck, trailer, or off-road build needing sequential amber turns and multiple red-light functions. Their strip format differs from oval replacements, and the supplied information does not specify mounting hardware.

Listed on Amazon as: PSEQT 10" LED Trailer Tail Light Bar Brake Stop Turn Signal Lights Assembly Identification Red & Amber Sequential Strobe Strip Lamp w/Smoked Lens Waterproof for Pickup Golf Cart Offroad Truck RV UTV

#9

9. Frienda 10-inch LED Light Bar

• Weight: 6.72 oz
• Lens Material: Acrylic
• Voltage: 30 V
• Compatible with Vehicle Type: Trailer, Truck

Best for: Ready-to-install light-bar pair.

Why it ranks #9: The red two-piece trailer kit includes screws and caps and lists IP67 protection, but the supplied details identify brake and tail lighting rather than turn functions.

Mounting screws and caps come with these Frienda 10-inch LED strips, giving buyers listed hardware for a direct, ready-to-install replacement or upgrade. The pair is red and IP67 rated, with the listing emphasizing waterproof, dustproof, and shockproof construction for trailer or truck use.

Each 10-inch strip is described as a direct, ready-to-install assembly, and included screws and caps can help streamline mounting without sourcing those listed items separately. The IP67 rating and stated resistance to water, dust, and shock suit exterior trailer or truck use in exposed conditions. Acrylic lenses and a 30-volt specification are provided in the supplied details, so buyers should match the stated voltage to their intended system before choosing. The listing does not detail individual light functions.

Skip it if you need clearly listed stop-turn-tail functions; RUNBAITOO TYX-010A specifies those functions for its oval lights.

Consider this pair for a truck or trailer owner seeking red 10-inch strips with listed mounting hardware and IP67 protection. Check the 30-volt specification against your electrical system; individual light functions are not detailed.

Listed on Amazon as: Frienda 2 Pcs LED Trailer Lights Strip 10 Inch 15 Brake Tail Light Bar, Red

#10

10. LivTee Motorcycle LED Strip

• Weight: 0.27 g
• Lens Material: Plastic
• Voltage: 12 V
• Compatible with Vehicle Type: Motorcycle

Best for: Flexible motorcycle signal strips.

Why it ranks #10: Its 12-volt flexible strip lists tail, brake, and left and right turn functions, but it is designed for motorcycles rather than trailer or truck replacement.

A flexible eight-inch strip with four functions gives the LivTee a motorcycle-focused alternative to conventional trailer lamps. Its 32 SMD chips provide running-tail, brake, left-turn, and right-turn lighting in one unit, while 3M tape mounting supports placement on a suitable surface without a rigid housing.

The all-in-one strip handles running tail, brake, and left- and right-turn functions, reducing the need to place separate signal strips for those roles. Flexible FPC construction and plastic form the strip, while IP65 silicone protection is specified for water exposure. Installation uses 3M tape and a five-wire connection, so placement and wiring both matter during setup. The listing specifies 12-volt operation and motorcycle compatibility, making it a more focused match than a general trailer-light assembly.

Skip it if you need an oval trailer replacement with a standard three-prong plug; RUNHWEE WD010 lists that connection.

This strip suits motorcycle, scooter, quad, or off-road owners seeking combined tail, brake, and turn signals in a flexible format. It runs on 12 volts and uses tape mounting plus five-wire installation, so plan placement and wiring.

Listed on Amazon as: LivTee Universal 8" Flexible LED Light Strip with Tail Brake Stop Turn Signal Lights All-in-one for Motorcycle Scooter Quad Cruiser Off Road, Red/Amber