A strong 1-inch leveling kit delivers a stated one-inch lift at the correct end of a compatible vehicle, making it a practical choice for truck owners addressing a specific stance or clearance need. Our leading pick, MotoFabLifts CH-1LM, is a front kit for Chevrolet and GMC 1500 pickups and specifies a true one-inch lift. This roundup also includes other front spacers, a Colorado/Canyon kit, rear lift blocks, and an adjustable torsion-key kit, so the products are not interchangeable.
Check the exact vehicle, model year, drivetrain, and suspension setup before ordering. Pay particular attention to whether a product lifts the front or rear: a one-inch rear block will not level a front-low truck.
The comparisons below prioritize fitment and stated lift, then useful design details and included components.
MotoFabLifts CH-1LM is the leading choice because it specifies a true one-inch front lift and fits Chevrolet and GMC 1500 pickups from 2007–2025, except Trail Boss and AT4. Its CNC-machined, anodized billet-aluminum spacers are designed to install without strut or coil disassembly, and the listing estimates installation at about 1.5–2 hours. Confirm the exact year and trim before purchase; its broad stated range does not mean it fits every 1500 configuration.
Our Top Picks

Specifies a true 1-inch front lift for 2007–2025 Chevrolet and GMC 1500 pickups, with billet-aluminum spacers and no strut or coil disassembly.
View on Amazon
Broad Model CoverageLists a 1-inch front lift for numerous Chevrolet and GMC models through 2024, including RWD and 4WD fitment, while excluding AWD.
View on Amazon
Forged AluminumUses forged 6061-T6 aluminum and 12.9-grade bolts, with listed Chevrolet and GMC applications spanning several truck and SUV models.
View on Amazon- Colorado-Canyon Fit Rough Country 921
Compare these 1-inch leveling kit options
| # | Product | Material | Material Type | Buy |
|---|---|---|---|---|
| 1 | 1. MotoFabLifts CH-1LMBest Overall | Aluminum | Aluminum | View on Amazon |
| 2 | 2. YHTAUTO Front KitBroad Model Coverage | Aluminum | Aluminum | View on Amazon |
| 3 | 3. EVIL ENERGY Front SpacersForged Aluminum | Aluminum | Aluminum | View on Amazon |
| 4 | 4. X AUTOHAUX Front SpacersBillet-aluminum Silverado front lift | Billet Aluminum | Billet Aluminum | View on Amazon |
| 5 | 5. Rough Country 921Colorado-Canyon Fit | Metal | Metal | View on Amazon |
| 6 | 6. Wsays Front Spacer KitSteel-control-arm-specific spacer kit | Alloy Steel, Aluminum | Alloy Steel, Aluminum | View on Amazon |
| 7 | 7. PROEZE Rear BlocksSilverado and Sierra rear lift | Aluminum | Aluminum | View on Amazon |
| 8 | 8. SCITOO Rear KitTacoma and Tundra rear leveling | Aluminum | Aluminum | View on Amazon |
| 9 | 9. MZS Rear Lift BlocksTacoma and Tundra rear blocks | Aluminum | Aluminum | View on Amazon |
| 10 | 10. dynofit Torsion Key KitHeavy-duty torsion-bar adjustment | Carbon Steel | Carbon Steel | View on Amazon |
Detailed Reviews: Best 1 Inch Leveling Kit

#1 · Best Overall
1. MotoFabLifts CH-1LM
- Material: Aluminum
- Material Type: Aluminum
Best for: DIY Silverado and Sierra installation.
Why it ranks #1: Specifies a true 1-inch front lift for 2007–2025 Chevrolet and GMC 1500 pickups, with billet-aluminum spacers and no strut or coil disassembly.
Installation without strut or coil disassembly is the clearest practical distinction of MotoFabLifts’ kit, with a stated install time of about 11⁄2–2 hours. It raises the front a true inch and fits listed 2007–2025 Chevrolet and GMC 1500 pickups, excluding Trail Boss and AT4.
CNC-machined billet aluminum provides the spacer material, and black anodizing is specified to match the factory suspension. Because the kit does not require strut or coil disassembly, the stated installation approach can simplify the work compared with kits that require those steps. Its 2007–2025 pickup coverage is broad, but the explicit Trail Boss and AT4 exclusions matter when checking whether this front lift suits a particular truck.
- Raises the front by a true 1 inch
- CNC-machined billet-aluminum spacers
- No strut or coil disassembly required
- Includes an installation guide
- Does not fit Trail Boss or AT4 models.
Skip it if you own a Trail Boss or AT4; this kit explicitly excludes those trims.
This suits Chevrolet or GMC 1500 owners within the listed 2007–2025 range who want a true one-inch front raise and an installation that avoids strut or coil disassembly. Trail Boss and AT4 trucks are outside its stated fitment.
Full product details
| Brand | MOTOFAB LIFTS |
|---|---|
| Included Components | Strut Spacers, Installation Guide |
| Manufacturer | MotoFab Lifts |
| Part Number | CH-1LM |
| Manufacturer Warranty Description | Lifetime Warranty |
| Material | Aluminum |
| Model Number | CH-1LM |
Listed on Amazon as: MotoFabLifts CH-1LM – 1 inch Front Leveling Lift Kit That is compatible with Chevy/Gmc Pickup
View on Amazon
#2 · Broad Model Coverage
2. YHTAUTO Front Kit
- Material: Aluminum
- Material Type: Aluminum
Best for: Chevrolet and GMC front spacer.
Why it ranks #2: Lists a 1-inch front lift for numerous Chevrolet and GMC models through 2024, including RWD and 4WD fitment, while excluding AWD.
A one-inch front raise with broad Chevrolet and GMC coverage is the core proposition of the YHTAUTO kit, including several pickups and SUVs across stated model years. Its fitment is limited to rear-wheel-drive and four-wheel-drive versions, while AWD models are explicitly excluded.
The listed applications span Avalanche, Silverado, Tahoe, Suburban, Sierra, Yukon, and Yukon XL, with year ranges varying by model. YHTAUTO says the strut mount raises the front by one inch and provides a higher driving angle and clearer view of the road ahead. The RWD/4WD-only restriction is important because an AWD vehicle falls outside the stated fitment, so buyers need to match both model year and drivetrain to the application list.
- Raises the front by a stated 1 inch
- Covers multiple listed Chevrolet and GMC models
- Specifies a higher driving angle and clearer view
- Aluminum construction
- Does not fit AWD models.
Skip it if you have an AWD model; the supplied fitment information limits this kit to RWD and 4WD vehicles.
This suits owners of listed Chevrolet or GMC models seeking a one-inch front raise and whose vehicle is RWD or 4WD. Year ranges vary by model, and AWD vehicles are expressly excluded.
Full product details
| Brand | YHTAUTO |
|---|---|
| Included Components | Comes with housing |
| Manufacturer | YTAUTOPARTS |
| Part Number | YHTSPLK0068-A |
| Material | Aluminum |
| Model Number | Fits Chevy Silverado |
Listed on Amazon as: YHTAUTO 1 Inch Front Leveling Lift Kit for Chevrolet, GMC
View on Amazon
#3 · Forged Aluminum
3. EVIL ENERGY Front Spacers
- Material: Aluminum
- Material Type: Aluminum
Best for: Broad Chevrolet and GMC coverage.
Why it ranks #3: Uses forged 6061-T6 aluminum and 12.9-grade bolts, with listed Chevrolet and GMC applications spanning several truck and SUV models.
A broad stated application range sets this EVIL ENERGY spacer kit apart: it covers several Chevrolet and GMC trucks and SUVs across specified model years. Forged 6061-T6 aluminum and CNC processing support a one-inch front-leveling setup with precisely positioned holes, according to the supplied details.
The forged 6061-T6 aluminum construction is paired with CNC automatic processing, which the listing links to accurate hole positioning and easier installation. Included installation hardware and a guide give the buyer listed components for the job. Fitment spans Silverado, Sierra, Tahoe, Yukon, Avalanche, and Suburban applications, but the model-year ranges differ by vehicle, so the stated compatibility list—not just the vehicle name—defines the intended coverage.
- Forged 6061-T6 aluminum construction
- CNC processing for precise hole positioning
- Installation hardware and guide included
- Covers multiple listed Chevrolet and GMC models
- The listed warranty period is three months.
Skip it if you need warranty coverage beyond three months; the supplied listing states a three-month warranty.
This is for buyers whose Chevrolet or GMC model and year fall within the specific listed applications and who want a one-inch front spacer kit with included hardware. Check the separate year range for the exact vehicle before choosing it.
Full product details
| Brand | EVIL ENERGY |
|---|---|
| Included Components | Installation Guide, Installation Hardware, Strut Spacer |
| Manufacturer | EVIL ENERGY |
| Part Number | OS11027BK |
| Manufacturer Warranty Description | 3 months |
| Material | Aluminum |
| Model Number | OS11027BK |
Listed on Amazon as: EVIL ENERGY 1" Leveling Lift Kit Compatible with 2007-2019 Chevy Silverado 1500 Avalanche Suburban Tahoe/GMC Sierra Yukon, 1 inch Front Suspension Strut Spacers Black
View on Amazon
#4
4. X AUTOHAUX Front Spacers
- Material: Billet Aluminum
- Material Type: Billet Aluminum
Best for: Billet-aluminum Silverado front lift.
Why it ranks #4: Provides a true 1-inch front lift for Chevrolet 1500; the listing identifies billet aluminum, but gives less detailed vehicle-year fitment.
A true one-inch front lift comes from a spacer thinner than one inch, accounting for suspension geometry rather than treating spacer thickness as lift height. X AUTOHAUX pairs that stated lift result with billet-aluminum construction, giving Silverado 1500 owners a focused front-leveling option.
The kit includes a strut spacer and installation hardware, so the listed components cover the spacer installation rather than requiring a separately listed hardware package. Its 4.92-by-2.36-by-0.59-inch dimensions help identify the part’s physical size, while the stated geometry explains why its thickness is not one inch despite producing a true one-inch front raise. The supplied information names Chevrolet 1500, but does not give model years or a fuller fitment range.
- Raises the front by a stated true 1 inch
- Billet-aluminum spacer construction
- Installation hardware is included
- Lists physical spacer dimensions
- Supplied fitment details do not specify compatible model years.
Skip it if you need a stated model-year range; the supplied listing identifies Chevrolet 1500 but gives no years.
A Chevrolet 1500 owner seeking a one-inch front lift may value the billet spacer and included hardware. The key boundary is fitment: the supplied information does not identify model years, so this listing offers limited year-specific guidance.
Full product details
| Brand | X AUTOHAUX |
|---|---|
| Included Components | Installation Hardware, Strut Spacer |
| Manufacturer | X AUTOHAUX |
| Part Number | a21012100ux0059 |
| Material | Billet Aluminum |
| Model Number | a21012100ux0059 |
Listed on Amazon as: X AUTOHAUX 1 Inch Front Leveling Lift Spacers Kit for Chevrolet 1500
View on Amazon
#5 · Colorado-Canyon Fit
5. Rough Country 921
- Material: Metal
- Material Type: Metal
Best for: Colorado and Canyon factory-rake lift.
Why it ranks #5: Specifically fits 2015–2022 Chevrolet Colorado and GMC Canyon, with front upper strut spacers intended to level while retaining slight factory rake.
Retaining a slight factory rake while leveling the front is the specific aim of Rough Country’s one-inch kit for the Colorado and Canyon. Its upper strut spacers are presented as a way to add ground clearance for on- and off-road obstacles while keeping a factory-like ride.
The included pair of upper strut spacers provides the listed front-lift components for 2015–2022 Chevrolet Colorado and GMC Canyon applications. Rough Country describes the result as leveling the front with the rear while retaining a slight factory rake, so the intended outcome is not a perfectly flat stance. The listing also calls installation easy at home and notes supported installation, while its safety information calls for bolt and nut tightness checks after the first 500 miles and every 1,000 miles afterward.
- For listed 2015–2022 Colorado and Canyon models
- Includes two upper strut spacers
- Aims to retain slight factory rake
- Adds stated ground clearance for obstacles
- Requires bolt and nut tightness checks at specified mileage intervals.
Skip it if you do not want recurring fastener checks; the listing specifies checks after 500 miles and every 1,000 miles thereafter.
Colorado and Canyon owners in the listed 2015–2022 range may choose this for a one-inch front lift, obstacle clearance, and retained factory rake. Its stated fastener-check schedule is an ongoing maintenance consideration.
Full product details
| Brand | Rough Country |
|---|---|
| Included Components | FRONT: (2) Upper strut spacers- |
| Manufacturer | Rough Country |
| Part Number | 921 |
| Manufacturer Warranty Description | Limited Lifetime Warranty |
| Material | Metal |
| Model Number | 921 |
| Additional Information | Important information Safety Information It is ultimately the buyer's responsibility to have all bolts/nuts checked for tightness after the first 500 miles, and then again every 1,000 miles. Wheel alignment, steering system, suspension, and driveline systems must be inspected by a qualified, professional mechanic at least every 3,000 miles. |
Listed on Amazon as: Rough Country 1" Leveling Kit for 2015-2022 Chevy Colorado/GMC Canyon – 921
View on Amazon
#6
6. Wsays Front Spacer Kit
- Material: Alloy Steel, Aluminum
- Material Type: Alloy Steel, Aluminum
Best for: Steel-control-arm-specific spacer kit.
Why it ranks #6: Offers a 1-inch front spacer kit for GMC and Chevrolet, but fitment is restricted to vehicles with factory steel front lower control arms.
A strict control-arm requirement is the defining fitment detail for this one-inch front spacer kit: it fits only vehicles equipped with factory steel front lower control arms. That makes the arm specification the first decision point for buyers considering this alloy-steel and aluminum spacer option.
The product is identified as a one-inch front leveling spacer kit, and its listed materials are alloy steel and aluminum. However, the supplied fitment fact narrows its use to vehicles with factory steel front lower control arms, a detail that can determine whether the part is suitable before installation planning begins. The listing does not provide a vehicle or model-year range in the supplied information, so its practical fitment guidance is limited to that control-arm condition.
- Listed as a 1-inch front leveling spacer kit
- Uses alloy steel and aluminum
- Specifies factory steel lower control arm fitment
- Front spacer is included
- Fits only vehicles with factory steel front lower control arms.
Skip it if you have factory aluminum front lower control arms; this kit is limited to factory steel arms.
This may suit a buyer whose vehicle has factory steel front lower control arms and who is seeking a one-inch front spacer. The supplied fitment information gives no model-year list, making the control-arm condition essential.
Full product details
| Brand | Wsays |
|---|---|
| Included Components | Front Spacer |
| Manufacturer | WSays |
| Part Number | 767421003910 |
| Material | Alloy Steel, Aluminum |
| Model Number | 767421003910 |
Listed on Amazon as: Wsays 1" Front Leveling Lift Spacer Kit Fit for GMC Chevy
View on Amazon
#7
7. PROEZE Rear Blocks
- Material: Aluminum
- Material Type: Aluminum
Best for: Silverado and Sierra rear lift.
Why it ranks #7: A 1-inch rear block option for 1999–2023 Silverado 1500 and 1999–2021 Sierra 1500, but it does not lift the front.
This is a rear leveling block kit, not a front spacer: PROEZE lists a one-inch rear lift for specified Silverado and Sierra 1500 years. Its black-coated aluminum blocks are presented for ground clearance and larger custom rims and tires, making axle location central to the buying decision.
The stated fitment covers Silverado 1500 1999–2023 and Sierra 1500 1999–2021, both in two-wheel-drive and four-wheel-drive configurations. A black surface coating is associated with wear and rust resistance, while the listing also describes high compressive strength and a forging process. The claimed ground-clearance benefit and allowance for larger custom rims and tires concern the rear setup; buyers seeking a front leveling spacer should note that this product is specifically rear-focused.
- One-inch rear lift is stated
- Fits listed Silverado and Sierra 1500 years
- Black coating is described as rust resistant
- Supports stated ground-clearance and larger-wheel uses
- Raises the rear, not the front.
Skip it if you need a front leveling spacer; this PROEZE kit raises the rear only.
This fits buyers seeking a rear one-inch lift for a listed Silverado or Sierra 1500 year and drivetrain, especially when rear clearance is the goal. It is not the choice for raising the front of a truck.
Full product details
| Brand | PROEZE |
|---|---|
| Included Components | Comes with housing |
| Manufacturer | PROEZE |
| Part Number | PR38159 |
| Manufacturer Warranty Description | 1 year |
| Material | Aluminum |
| Model Number | PR38159 |
Listed on Amazon as: PROEZE 1in Rear Leveling Lift Block Kit for 1999-2023 Silverado Sierra 1500
View on Amazon
#8
8. SCITOO Rear Kit
- Material: Aluminum
- Material Type: Aluminum
Best for: Tacoma and Tundra rear leveling.
Why it ranks #8: Lists a true 1-inch rear lift and 6061-T6 aluminum, but its stated fitment is Tacoma 1995–2004 and Tundra 2000–2006.
SCITOO specifies a true one-inch rear lift from blocks thinner than one inch, explaining that suspension geometry separates block thickness from lift height. The listed fitment is for Toyota Tacoma 1995–2004 and Tundra 2000–2006, making this a rear-specific option with defined year limits.
The 6061-T6 aircraft-grade billet aluminum material is the listed construction, and the geometry note clarifies why the spacer thickness does not equal the resulting lift. The supplied fitment names Tacoma 1995–2004 and Tundra 2000–2006, despite the title’s broader date wording; those detailed years provide the more specific application guidance. Because this is a rear leveling kit, it addresses rear height rather than providing a front lift.
- Raises the rear by a stated true 1 inch
- 6061-T6 aircraft-grade billet aluminum
- Explains thickness versus lift-height geometry
- Lists Tacoma and Tundra year ranges
- Fits only the listed older Tacoma and Tundra model years.
Skip it if you need a front lift or a newer listed application; this is rear-only and its detailed fitment ends at 2006 for Tundra.
This suits owners of Tacoma 1995–2004 or Tundra 2000–2006 seeking a one-inch rear raise with billet-aluminum blocks. It is not a front kit, and the supplied detailed fitment years are limited.
Full product details
| Brand | SCITOO |
|---|---|
| Included Components | strut spacers |
| Item Weight | 4.03 kg |
| Manufacturer | SCITOO |
| Part Number | 131660-5206-1632559671 |
| Manufacturer Warranty Description | 1 year |
| Material | Aluminum |
| Model Number | 131660-5206-1632559671 |
| Additional Information | Important information |
Listed on Amazon as: SCITOO 1" Rear Leveling Kit 2000-2021 for Toyota for Tundra lift
View on Amazon
#9
9. MZS Rear Lift Blocks
- Material: Aluminum
- Material Type: Aluminum
Best for: Tacoma and Tundra rear blocks.
Why it ranks #9: Includes rear blocks and U-bolts for listed Tacoma and Tundra applications, but the rear-only lift does not address a front-leveling need.
A true one-inch rear raise is specified even though the MZS block itself is thinner than one inch, reflecting the listing’s suspension-geometry explanation. The kit includes rear lift blocks and U-bolts for compatible Tacoma and Tundra applications, with fitment details requiring careful vehicle-specific checking.
The supplied title identifies compatibility with 1995–2023 Tacoma and 2000–2021 Tundra, while the product information directs buyers to the vehicle fitment list for detailed applications. The package includes aluminum rear blocks and U-bolts, giving the listed components for a rear lift installation. MZS notes that U-bolts may be longer on some models and may need partial trimming, an installation consideration that affects preparation and the work involved.
- Raises the rear by a true 1 inch
- Aluminum rear lift blocks
- U-bolts are included
- Lists Tacoma and Tundra application ranges
- Some applications may require partial U-bolt trimming.
Skip it if you want a front lift; these blocks raise the rear, and some listed applications may need U-bolt trimming.
Tacoma or Tundra owners within the stated application ranges may consider these blocks for a true one-inch rear lift. Check the detailed fitment list, and account for the stated possibility of trimming longer U-bolts.
Full product details
| Brand | MZS |
|---|---|
| Included Components | U bolts, rear lift block |
| Manufacturer | MZS |
| Part Number | MZS1rearliftblock260112 |
| Material | Aluminum |
| Model Number | rear lift blocks |
Listed on Amazon as: MZS 1" Rear Lift Blocks w/U-Bolts Compatible with 95-23 Tacoma/00-21 Tundra
View on Amazon
#10
10. dynofit Torsion Key Kit
- Material: Carbon Steel
- Material Type: Carbon Steel
Best for: Heavy-duty torsion-bar adjustment.
Why it ranks #10: Its 1–3-inch adjustable torsion-key range and 8-lug heavy-duty applications do not match a fixed 1-inch kit for a typical 1500.
Adjustable torsion keys distinguish this dynofit kit from a fixed one-inch spacer: its stated lift range is one to three inches, with shock extension brackets included. The fitment list focuses on eight-lug Chevrolet and GMC heavy-duty applications, making vehicle configuration central to choosing it.
The kit includes two front adjustable torsion keys and two front shock extensions, allowing adjustment within the stated one-to-three-inch range rather than specifying a single fixed lift. Cold-forged carbon steel with a powder-coated surface is listed for the keys, with corrosion resistance cited as a benefit. The extensive application list covers specified Silverado, Sierra, Suburban, Yukon XL, and Avalanche eight-lug models; professional installation and alignment are recommended in the supplied information.
- Adjustable stated lift range of 1–3 inches
- Includes two front shock extension brackets
- Cold-forged carbon steel construction
- Lists multiple eight-lug heavy-duty applications
- Professional installation and alignment are recommended.
Skip it if you want a fixed one-inch spacer for a light-duty 1500; this adjustable torsion-key kit targets listed eight-lug applications.
This is for owners of listed eight-lug Chevrolet or GMC heavy-duty applications who want adjustable front height and included shock extensions. Its one-to-three-inch range is not a fixed one-inch setting, and professional installation and alignment are recommended.
Full product details
| Brand | dynofit |
|---|---|
| Included Components | 2 x Front Adjustable Torsion Keys, 2 x Front Shock Extensions |
| Manufacturer | Fastfree |
| Part Number | FF-T82303 |
| Manufacturer Warranty Description | 2 Year Quality Warranty and Brand Gurantee |
| Material | Carbon Steel |
| Model Number | FF-T82303 |
| Additional Information | Important information |
Why a one-inch spacer may not be one inch thick
A spacer that produces a one-inch lift can be physically thinner than one inch because suspension geometry changes the relationship between spacer thickness and wheel-end lift. X AUTOHAUX explicitly states that its spacer is thinner than one inch while raising the front by a true inch; SCITOO and MZS make the same distinction for their rear products. Do not use the spacer’s measured thickness alone to estimate the resulting ride height.
The more consequential trap is mixing lift location and application: rear blocks such as PROEZE and SCITOO cannot correct a low front end, while a front strut spacer is not a rear block substitute. Confirm the listing’s stated lift location and vehicle fitment before comparing dimensions, and verify the exact model and year in the seller’s fitment information where the supplied listing advises it.
Fitment restrictions that can rule out a kit
A kit’s stated vehicle family does not guarantee that it fits every trim, suspension, or drivetrain within that family. MotoFabLifts CH-1LM excludes Trail Boss and AT4, while YHTAUTO specifies RWD and 4WD fitment and excludes AWD. Wsays adds a different restriction: the vehicle must have factory steel front lower control arms.
These details can matter more than the shared one-inch lift claim. The rear products also target different vehicles: PROEZE lists Silverado and Sierra 1500 applications, whereas SCITOO names older Tacoma and Tundra years.
Do not assume a brand, model name, or approximate year range is enough to establish compatibility. Match the exact year, trim, drivetrain, and suspension configuration against the product fitment listing; if a required detail is missing, confirm it before ordering.
How to Choose a 1-Inch Leveling Kit
Lift location and amount
First choose the end of the vehicle you need to raise, then verify the stated lift amount. Most options here are fixed 1-inch kits, including MotoFabLifts CH-1LM and the X AUTOHAUX front spacers; Rough Country 921 is also a 1-inch front kit. PROEZE, SCITOO, and MZS are rear-lift products, not front leveling choices.
dynofit differs with an adjustable 1–3-inch torsion-key range rather than a fixed one-inch lift. A buyer correcting front stance should favor one of the front spacers, while someone addressing rear height should consider a rear block only if its fitment matches.
If adjustability is important and the heavy-duty application fits, dynofit offers a wider stated range.
Vehicle and suspension fitment
Look for an exact match to year, model, drivetrain, trim, and suspension hardware rather than relying on a broad make-and-model label. MotoFabLifts CH-1LM lists 2007–2025 Chevrolet and GMC 1500 pickups but excludes Trail Boss and AT4; YHTAUTO lists many models through 2024 but excludes AWD. Wsays requires factory steel front lower control arms.
Rough Country 921 is specifically listed for 2015–2022 Colorado and Canyon, while dynofit targets older 8-lug heavy-duty applications. Buyers with a clearly matching 1500 configuration have more directly relevant front options; those with a restricted trim, AWD setup, or particular control arms should prioritize the product that explicitly covers that configuration and verify it before ordering.
Spacer material and installation details
Compare the construction and installation details that are actually listed, especially if you want to avoid a design that requires more suspension disassembly. MotoFabLifts specifies CNC-machined billet aluminum, anodized black, and installation without strut or coil disassembly; the listing estimates about 1.5–2 hours. EVIL ENERGY lists forged 6061-T6 aluminum and 12.9-grade bolts, while X AUTOHAUX identifies billet aluminum.
Rough Country supplies upper strut spacers for Colorado and Canyon. These details do not establish identical installation difficulty or performance, so do not infer a fit or labor time from material alone.
Buyers prioritizing an explicitly described installation approach can favor MotoFabLifts; buyers comparing construction can use the stated material and included hardware while checking the vehicle-specific instructions.
Which 1-Inch Leveling Kit Should You Choose?
Choose MotoFabLifts CH-1LM if you need a front lift for a compatible Chevrolet or GMC 1500: it states a true one-inch raise and describes installation without strut or coil disassembly. For a broader list of Chevrolet and GMC models, consider YHTAUTO Front Kit, but check its RWD/4WD-only restriction and the exact vehicle fit. EVIL ENERGY Front Spacers are another front option with forged 6061-T6 aluminum.
Colorado or Canyon owners should look at Rough Country 921, which is listed for those models from 2015–If you need rear lift instead, compare PROEZE Rear Blocks for listed Silverado/Sierra 1500s or SCITOO Rear Kit for its listed Tacoma and Tundra applications.
Do not choose by the one-inch label alone: front and rear kits solve different problems.
Related Buying Guides
Frequently Asked Questions
Will a 1-inch leveling kit change my truck’s ride or handling?
It can, because changing ride height may affect suspension geometry and how the truck feels on the road. The result depends on the kit, vehicle, and installation. Check the product’s application details, follow its instructions, and pay attention to any new vibration, noise, or handling changes after installation.
Do I need a wheel alignment after installing a leveling kit?
An alignment is generally recommended after changing suspension height, since the adjustment can affect wheel angles. Have a qualified shop inspect alignment after installation and follow the kit maker’s instructions for your specific vehicle. This helps identify whether settings need correction before you rely on the vehicle for regular driving.
Can I install a leveling kit without replacing or disassembling suspension parts?
Some kits are designed to avoid particular disassembly steps, but installation requirements vary. MotoFabLifts CH-1LM says it installs without strut or coil disassembly; that detail should not be assumed for the other kits. Review the instructions for the exact product and vehicle, and use a qualified installer if the procedure is unclear.
How do I check whether a kit fits my vehicle?
Match the listing to your exact year, make, model, trim, and drivetrain, then check any stated exclusions or restrictions. For example, the verdict notes MotoFabLifts CH-1LM excludes Trail Boss and AT4, while YHTAUTO has an RWD/4WD-only restriction. Confirm fitment before ordering rather than relying on a broad vehicle range.
Should I choose a front kit or a rear kit?
Choose based on which end needs lift: front spacers and front kits address the front, while rear blocks or kits address the rear. They are not interchangeable solutions. Compare the listed vehicle applications as well as lift location, and avoid selecting a kit based only on its one-inch description.
Final Words
For a compatible Chevrolet or GMC 1500, MotoFabLifts CH-1LM is the leading choice in this roundup: it specifies a true one-inch front lift and installation without strut or coil disassembly. Verify year and trim, including its Trail Boss and AT4 exclusions. Consider YHTAUTO or EVIL ENERGY for other front-kit needs, Rough Country for listed Colorado or Canyon applications, and the rear kits only when rear lift is what you need.
Confirm fitment before choosing.

